GovChime
Notice ID: dc3087c418dc4644b02026b7f4675ee3Special NoticeArchived

NOTICE OF INTENT-BMF HF Vapor Etcher

Archived on June 2, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
5:00 PM MDT
Posted
May 8, 2026
Notice type
Special Notice
Agency
Department of CommerceNATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY

Notice details

Office
DEPT OF COMMERCE NIST
Place of performance
Boulder, Colorado, 80305
Last updated
Oct 31, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
NB680000-26-01364
Notice ID
dc3087c418dc4644b02026b7f4675ee3

Description

The National Institute of Standards and Technology (NIST) Acquisition Management Division intends to negotiate with Idonus Sarl (Cage: SCH63), located in Switzerland on a sole source basis under the authority of FAR Subpart FAR RFO 12.102(a) for a BMF HF Vapor Etcher, Statutory authority for sole source is 41 U.S.C. 3304(a)(1), Only one responsible source. The statute is being implemented using simplified acquisition procedures under the authority of 41 U.S.C. 1901.

The sole source determination is based on the Government’s need by the Boulder Microfabrication Facility (BMF) for performing various etching processes in the Precision Measurement Laboratory located at National Institute of Standards and Technology’s (NIST) Boulder campus.  The BMF currently has a vapor etching system that is used to remove silicon dioxide films from substrates.  The current system can only accept substrates with a maximum size of wafers with a lateral dimension of SEMI spec 100 mm wafers.  The BMF also processes wafers with a lateral dimension of SEMI spec 150 mm wafers, and some of the new fabrication processes require HF vapor etching.  Therefore, the BMF requires a new HF vapor etcher with all of the existing capabilities as the existing vapor etcher, but with the ability to accept substrates up to wafers with a lateral dimension of SEMI spec 150 mm wafers.

The NAICS Code is 334516 – Analytical Laboratory Manufacturing, with a Size Standard of 1,000 employees. NIST anticipates negotiating and awarding a firm-fixed-price purchase order to Idonus Sarl for this requirement.

Interested parties that can demonstrate they could satisfy the requirements listed above for NIST must clearly and unambiguously identify their capability to do so in writing on or before the response date for this notice. This notice of intent is not a solicitation. Information submitted in response to this notice will be used solely to determine whether competitive procedures could be used for this acquisition. If competitive procedures are not used it is estimated that an award will be issued by June 2026. Any questions regarding this notice must be submitted in writing via email to angela.hitt@nist.gov. All responses to this notice of intent must be submitted to angela.hitt@nist.gov no later than 5/19/2025 at 5:00 p.m. MT.

JUSTIFICATION FOR OTHER THAN FULL AN OPEN COMPETITION:

HF vapor etching is a standard wafer processing technique in the semiconductor industry.  There are machines that range in size and ability from R&D to full foundry production and many companies offer a system.  Common systems use either HF liquid or gas.  The most important issue for an HF vapor is safety as HF is an extremely toxic chemical where exposures of 50 mL can be fatal.  Due to the danger of HF, the Government needs to stay with the liquid etchers for safety reasons. No other vendor can meet these technical requirements and meet the safety concerns. Without this procurement, critical NIST research activities involving etching processes would be forced to stop.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Files (1)

  • Statement of Requirements.docx

    40 KBAdded in Sources Sought version 1Posted
    Download

Lifecycle

  1. 1
    Version 1Sources SoughtCancelledArchived

    BMF HF Vapor Etcher

    Notice eda374cf3ce847de997241f5ce02bdd0 on SAM.gov

  2. 4
    Version 4Special NoticeArchivedCurrent

    Type changed from Sources Sought to Special Notice

    NOTICE OF INTENT-BMF HF Vapor Etcher

    Notice dc3087c418dc4644b02026b7f4675ee3 on SAM.gov

Other notices for this solicitation

  1. Market ResearchRelated noticeApr 29, 2026

    BMF HF Vapor Etcher

    Notice 32a11a73b64f4eaf9bf6b20ea73549eb on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
74%
Market Research11/20/2026
Sources Sought Notice for Graphite Furnace Atomic Absorption Spectrometer Notice ID: NIST-MML-FY27-SS01 Response Date: 11/28/2026 Product Service Code (PSC): 6640 NAICS Code: 334516 Background The Inorganic Chemical Metrology Group (ICMG) uses at least two measurement methods, each based on orthogonal physical principles, to certify the trace elements in candidate standard reference materials (SRM). These SRMs are intended for method validation and quality assurance in trace-element measurements to assess the nutritional value and contaminant status of agricultural products. A sensitive trace-element detector, a graphite furnace atomic absorption spectrometer (GFAAS) is sought to complement the group's inductively coupled plasma mass spectrometric (ICP-MS) measurement capability and fulfill the two independent method requirements for SRM development. Consideration will be given to GFAAS capable of direct solid-sample analysis to maximize its orthogonality relative to the liquid-sampling-based ICP-MS technique. Minimum Capabilities that NIST Requires and for Which Information is Being Requested The National Institute for Standards and Technology (NIST) located in Gaithersburg, MD is seeking information on vendors that are capable of providing a graphite furnace atomic absorption spectrometer (1) capable of measuring liquid test samples with an instrument detection limit (DL) for Cu at 0.02 µg/L or better (324.8 nm line, 50 µL sample volume, DL=3 x standard deviation of 10 replications) and (2) designed for direct introduction of solid state test samples into the graphite furnace for analyte quantification without a need of sample digestion Instructions for Responding to This Notice Parties that respond to this Notice are requested to submit the requested information via email in Microsoft Word, Adobe PDF, and/or Microsoft Excel format to the designated point(s) of contact whose name and email address appears at the bottom of this notice. Please provide only the information requested by this Notice, and do not include proprietary, classified, confidential, or sensitive information in a response to this Notice. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Information Requested in Response to This Notice: To help NIST with its market research, NIST is requesting that industry sources carefully review this notice and any attachments to it and voluntarily provide the following information: Company Summary Notice Identification: Notice ID and Title of this posting. Corporate Details: Company name, physical address, website address, and Unique Entity Identifier (UEI). Point of Contact (POC): Name, phone number, and email address. Company Size Standard: Your company’s size status relative to the NAICS code provided in this Notice. (Refer to the SBA Table of Small Business Size Standards). System for Award Management (SAM) Registration: Indicate whether your company has an active registration for procurement purposes in SAM.gov. Review the information included with this Notice, indicate whether there is anything that may inadvertently exclude domestically manufactured (made in the U.S.A.) end products from being considered; and indicate if anything included with this Notice could potentially be revised to improve the ability for domestic (“Made in America”) end products to be considered; and if a domestic end product is not currently available to meet the draft requirements/minimum specifications, please provide an estimated timeframe for when it may be domestically produced in the USA in the future if that appears to be likely. Information Regarding Commercial Products and Related Commercial Services Provide specifications, company name of the original equipment manufacturer, and the country of manufacture for commercial products and/or commercial services that your company is legally authorized to sell and that may meet NIST’s minimum requirements. Standard Commercial Pricing: Provide your company’s standard commercial pricing information for the requirements described in this Notice (including any Attachments) and explain what is included in those standard commercial prices. Estimated Price Range: You may provide an estimated price or estimated price range for the draft requirements included in this notice, including a brief explanation of how it was derived. Standard Commercial Terms and Conditions: Provide a copy of the standard commercial terms and conditions for the commercial products and/or commercial services identified in your company’s response to this Notice, including the nature and the duration of applicable standard commercial warranty(ies). Regulatory and Supply Chain Compliance Indicate whether your company could comply with RFO FAR clause 52.219-14 (Deviation JAN 2026) if this acquisition were to be set aside for small businesses (assuming that there is no waiver to the Nonmanufacturer Rule for the applicable NAICS code). Provide a brief supporting explanation. Existing Governmentwide Contract Vehicles Indicate whether your company has its own GSA Multiple Award Schedule (MAS) contract or other federal contract vehicle(s) under which NIST could award an order and, if so, provide the details of the contract(s) (contract number, Contracting Officer name/contact, SOW, terms and conditions, and price lists). Important Notes This Notice does not obligate the Government to award a contract or otherwise pay respondents to this notice for information provided in response to this Notice. Following a review of the responses and market research, NIST may publish a solicitation on an authorized site, depending on the chosen acquisition strategy. Responses received after the closing date for this Notice may not be considered. There is no solicitation available at this time. The Government reserves the right to use information that it receives in response to this Notice as it deems appropriate to establish final requirements or for other legally appropriate purposes. Any organization responding to this notice should ensure that its response is complete and sufficiently detailed to allow the Government to determine the organization’s capability. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted.
68%
Market Research11/28/2026
68%
Market Research12/05/2026
68%
Market Research12/03/2026
6640 - Region 8 Laboratory - SampleSense base modules and P7 FAST Kits, PerkinElmer part numbers N0810887, N8150455, and N8159235 (brand name), to complete the automated sample-introduction systems on two PerkinElmer Avio 550 Max ICP-OES and two PerkinElmer NexION 1100 ICP-MS instruments. The instruments are used to analyze low-level metals in samples from Superfund sites across Region 8.
64%
Solicitation11/30/2026

Additional Details

Solicitation Number

NB680000-26-01364

Archive Date

Jun 2, 2026

Office Address

GAITHERSBURG, MD, 20899