GovChime
Notice ID: b521c457135544e2af437ac160a9048cSources SoughtArchived

Acquisition of a Level D 747-8i Full Motion Simulator

Archived on January 31, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
5:00 PM EST
Posted
December 22, 2025
Notice type
Sources Sought
Set-aside
No Set aside used
NAICS
333310: Commercial and Service Industry Machinery Manufacturing
Agency
Department of WarDepartment of the Air Force

Notice details

Office
AIR FORCE MATERIEL COMMAND.AIR FORCE LIFE CYCLE MANAGEMENT CENTER.PRESIDENTIAL AND EXECUTIVE AIRLIFT.FA8641 PRES ALFT DIR AFLCMC WV
Place of performance
Wright Patterson AFB, Ohio, 45433
Last updated
Nov 4, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
F4FDWL-26-R-0001
Notice ID
b521c457135544e2af437ac160a9048c

Description

The United States Air Force is seeking information from qualified vendors capable of providing a new, Level D certified, Full Motion Simulator. This simulator must meet all applicable regulatory requirements and provide realistic and immersive training for pilots transitioning to, or maintaining currency, in the 747-8i aircraft. The simulator should be a new build, not a refurbished or an upgraded existing system. 

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (1)

  • 20251222_SOURCES SOUGHT NOTICE_Final.docx

    26 KBAdded in Sources Sought version 3Posted
    Download

Lifecycle

  1. 3
    Version 3Sources SoughtArchivedCurrent

    Acquisition of a Level D 747-8i Full Motion Simulator

    Notice b521c457135544e2af437ac160a9048c on SAM.gov

  2. 6
    Version 6Special NoticeArchived

    Type changed from Sources Sought to Special Notice

    Notice of Intent to Sole Source - Acquisition of a Level D 747-8i Full Motion Simulator

    Notice 2ac87b3cbfeb4aad84d36e37aeb5178c on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Contract Specialist: Zachary Rodriguez Email: Zachary.rodriguez@dla.mil Solicitation will be issued on or about: 10/30/2026 Solicitation will close on or about: 12/01/2026 NSN: 2590-01-703-2614 Nomenclature: INSTALLATION KIT, VEHICULAR EQUIPMENT COM Set-Aside Type: FULL AND OPEN W/ HUBZONE PRICE PREFERENCE Quantity: 66 EA Option: 100%; this may or may not be exercised at the time of award. FOB, Inspection, and Acceptance points as required per the solicitation. Required Delivery: 234 DAYS Ship-To Address: W25G1U W1A8 DLA DISTRIBUTION DDSP NEW CUMBERLAND FACILITY 2083 NORMANDY DRIVE DOOR 113 TO 134 NEW CUMBERLAND PA 17070-5002 US Drawing References- TDP Rev B Gen 2 IAW BASIC DRAWING NR 19207 57K9049 REVISION NR C DTD 04/18/2024 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12414473 REVISION NR H DTD 05/20/2026 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12421849 REVISION NR E DTD 09/04/2020 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12414474 REVISION NR E DTD 09/22/2016 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12420957 REVISION NR D DTD 08/08/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12422676 REVISION NR B DTD 09/25/2024 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12423144 REVISION NR B DTD 01/28/2021 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12421875 REVISION NR B DTD 08/14/2025 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12419954 REVISION NR E DTD 09/22/2016 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600473 REVISION NR C DTD 03/19/2026 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12608579 REVISION NR A DTD 04/03/2017 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12593834 REVISION NR K DTD 03/19/2026 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12609020 REVISION NR A DTD 01/31/2018 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600457 REVISION NR C DTD 08/31/2023 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600149 REVISION NR D DTD 09/13/2016 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12612043 REVISION NR A DTD 03/10/2020 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12605316 REVISION NR B DTD 09/12/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12607286 REVISION NR E DTD 12/09/2025 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12608580 REVISION NR B DTD 02/02/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12611590 REVISION NR A DTD 11/20/2018 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600094 REVISION NR C DTD 08/07/2024 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12608881 REVISION NR B DTD 12/09/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12608592 REVISION NR C DTD 08/18/2025 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12606565 REVISION NR A DTD 09/12/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12608869 REVISION NR A DTD 11/05/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12609416 REVISION NR B DTD 08/01/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12605593 REVISION NR A DTD 07/17/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12607650 REVISION NR B DTD 10/24/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12605791 REVISION NR B DTD 01/24/2020 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12607647 REVISION NR B DTD 01/20/2020 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12607826 REVISION NR A DTD 08/26/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600954 REVISION NR D DTD 01/28/2025 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12602228 REVISION NR D DTD 11/21/2025 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12604462 REVISION NR B DTD 09/23/2020 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12605312 REVISION NR D DTD 08/05/2021 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600429 REVISION NR B DTD 03/05/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600464 REVISION NR C DTD 01/07/2020 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12602472 REVISION NR M DTD 12/20/2023 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600453 REVISION NR B DTD 08/17/2021 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12603042 REVISION NR C DTD 04/04/2024 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12606188 REVISION NR A DTD 07/08/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12611138 REVISION NR A DTD 03/05/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12611587 REVISION NR A DTD 06/05/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12685292 REVISION NR DTD 07/07/2021 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600433 REVISION NR B DTD 07/08/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12603036 REVISION NR A DTD 08/02/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12603037 REVISION NR A DTD 08/02/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600460 REVISION NR B DTD 10/14/2020 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12609018 REVISION NR A DTD 08/24/2017 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12602128 REVISION NR B DTD 04/21/2020 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12602449 REVISION NR DTD 08/31/2016 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12606965 REVISION NR B DTD 08/27/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12611567 REVISION NR DTD 06/05/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12614427 REVISION NR A DTD 07/12/2021 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12610586 REVISION NR B DTD 04/16/2020 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12610587 REVISION NR A DTD 03/05/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12610588 REVISION NR A DTD 03/05/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12610591 REVISION NR A DTD 03/05/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12610710 REVISION NR B DTD 04/16/2020 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12610763 REVISION NR A DTD 03/05/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12611044 REVISION NR A DTD 03/05/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12610751 REVISION NR C DTD 05/19/2020 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 PPAP REVISION NR DTD 11/26/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12610939 REVISION NR D DTD 06/04/2020 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12610568 REVISION NR A DTD 03/05/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12611047 REVISION NR B DTD 03/05/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12610417 REVISION NR B DTD 03/05/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12610418 REVISION NR B DTD 03/05/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12610975 REVISION NR B DTD 01/22/2020 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12610414 REVISION NR D DTD 03/02/2021 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12611783 REVISION NR DTD 06/05/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600642 REVISION NR B DTD 10/10/2017 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600648 REVISION NR B DTD 10/11/2017 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600651 REVISION NR B DTD 10/11/2017 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12601582 REVISION NR DTD 02/05/2018 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12604194 REVISION NR B DTD 09/12/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12604841 REVISION NR A DTD 04/23/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12605315 REVISION NR C DTD 12/01/2021 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12607297 REVISION NR B DTD 11/05/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12607556 REVISION NR A DTD 10/11/2017 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12608866 REVISION NR B DTD 12/12/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12609225 REVISION NR A DTD 01/08/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12610708 REVISION NR D DTD 12/01/2020 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12610805 REVISION NR DTD 03/05/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12610911 REVISION NR A DTD 08/06/2021 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12610951 REVISION NR A DTD 06/05/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12611023 REVISION NR B DTD 03/05/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12611099 REVISION NR B DTD 08/26/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12611158 REVISION NR A DTD 03/05/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12611370 REVISION NR B DTD 09/18/2024 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12611371 REVISION NR B DTD 09/18/2024 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12611377 REVISION NR B DTD 04/12/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12611593 REVISION NR DTD 05/07/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12611784 REVISION NR A DTD 07/30/2020 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12611888 REVISION NR DTD 06/05/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12611925 REVISION NR B DTD 02/20/2025 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12612671 REVISION NR W DTD 03/31/2025 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12613575 REVISION NR DTD 10/06/2020 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12613576 REVISION NR DTD 10/06/2020 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12684962 REVISION NR A DTD 03/03/2022 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12684968 REVISION NR DTD 06/24/2021 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12685333 REVISION NR DTD 08/06/2021 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600649 REVISION NR B DTD 10/11/2017 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12602283 REVISION NR C DTD 08/06/2021 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12610416 REVISION NR B DTD 03/05/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12610867 REVISION NR A DTD 04/01/2020 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12610893 REVISION NR D DTD 04/18/2024 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12610952 REVISION NR A DTD 06/05/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12611621 REVISION NR B DTD 01/18/2023 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12611780 REVISION NR DTD 06/05/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 57K9048 REVISION NR B DTD 03/18/2020 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 IM57K9049-003 REVISION NR B DTD 05/16/2022 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12612637 REVISION NR DTD 01/18/2023 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12612638 REVISION NR DTD 09/29/2020 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12612639 REVISION NR DTD 09/29/2020 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12685111 REVISION NR DTD 01/18/2023 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12685112 REVISION NR DTD 01/18/2023 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12600125 REVISION NR D DTD 01/28/2025 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 57K9049 REVISION NR DTD 11/04/2024 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12602472 REVISION NR K DTD 12/20/2023 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19207 12610999 REVISION NR DTD 06/05/2019 PART PIECE NUMBER: TDP Rev B Gen 2 IAW REFERENCE QAP 16236 SQAP-JLTV-PPAP-CFAT REVISION NR DTD 08/18/2025 PART PIECE NUMBER: While pricing may be a significant factor in the evaluation of offers, the final award decision will be based on a combination of price, delivery, and performance. DLA Internet Bid Board System (DIBBS) offers are acceptable for this solicitation. Offerors must complete the entire solicitation. Offers must be submitted on a hard copy of this SF 33 Request for Proposal (RFP), scanned, and uploaded through DIBBS (PREFERRED METHOD) or email proposals to: Zachary.rodriguez@DLA.MIL. All offers shall be in the English language and in US dollars. All interested suppliers may submit an offer. Based on market research this item is manufactured for military use only and is not commercial; therefore, the Government is not using the policies contained in FAR Part 12 in its solicitation for this item. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government’s requirement with a commercial item with 15 days of this notice. This requirement will be solicited per FAR part 15.
-Pre-Solicitation10/30/2026
A gigapixel camera that captures three-dimensional images in a single shot Creating 3D images usually requires multiple cameras or repeated measurements. GigaPic-3D can capture a gigapixel image in a single exposure. The camera uses light-field imaging, a technique that records both the amount of light and the direction it travels, allowing software to reconstruct 3D images and refocus them after they have been captured. The same camera architecture can also be configured for imaging across a broad range of wavelengths, including visible light and X-rays. This flexibility allows one platform to support scientific, industrial, security and medical applications. Overview GigaPic-3D combines many image sensors into a single camera. Together, these sensors produce images containing billions of pixels. Most gigapixel imaging systems create a final image by collecting many separate photographs and stitching them together. GigaPic-3D captures the entire scene in a single shot, reducing image collection time and eliminating the need to align multiple images before processing. Unlike a conventional camera that records only the brightness of light, GigaPic-3D’s light-field imaging also records the direction that light travels. Its software uses this information to create 3D images and adjust the focus after the image has been captured. The modular design can be adapted for visible light, ultraviolet light, infrared light or X-ray imaging by selecting different optical components and radiation-conversion materials. Advantages Captures gigapixel images in a single shot Produces 3D images from a single exposure Allows images to be refocused after they are captured Eliminates the need to stitch together multiple photographs Built primarily from commercially available components Configurable for imaging from visible light through X-rays Modular design supports different sensors, optics and camera configurations Integrated processing reconstructs images directly from the collected data Technology Description GigaPic-3D uses several layers that work together to capture and process an image. Light first passes through an optical layer that directs it onto an array of image sensors. For X-ray imaging, the system includes materials that convert X-rays into visible light that conventional image sensors can detect. Instead of relying on one large image sensor, the camera combines many smaller commercial sensors into a single array. Because the sensors remain in fixed positions, they work together as one imaging system, eliminating the repeated alignment required when combining images from separate cameras. The camera records both the brightness and direction of incoming light. Reconstruction software then creates a high-resolution image, generates 3D views and allows users to refocus the image after it has been captured. Because the system is modular, different image sensors, optical components and detector materials can be combined to meet the needs of different applications while using the same overall camera design. Market Applications Scientific and Research Imaging (astronomy and space imaging, fusion diagnostics) Industrial and Manufacturing (inspection, non-destructive testing, machine vision, advanced manufacturing) Medical and Biomedical (imaging, gigamacro applications) Environmental and Agricultural Monitoring (remote sensing, observation) Cultural Heritage and Preservation (high-resolution imaging, museum-grade digitization) Technology Readiness Level 3 LA-UR-26-28965 US Patent No. 12,574,655
-Special Notice03/06/2027
The 355th Contracting Squadron intends to award a sole-source, Blanket Purchase Agreement (BPA) to Evoqua Water Technologies LLC, CAGE 72XB4 located at 11147th St Pittsburgh, PA 15201. The anticipate award date is 18 November 2026 with an ordering period of 1 December 2026 – 30 November 2031 for an amount not expected to exceed $70,000.00. Point of Contact: Patricia Murray, Contracting Officer 355th Contracting Squadron 3180 S. Craycroft Rd B2528 Davis-Monthan AFB, AZ 85707 Email: patricia.murray.6@us.af.mil Commercial Phone: 520-228-3095 NAICS: 333310 PSC: W046 Description of Supplies/Services: The requirement includes continuous equipment rental, preventative maintenance (PM), and service of the installed Industrial Wastewater Treatment System supporting industrial operations of paint booths for the 309th Aerospace Maintenance and Regeneration Group (AMARG). This current equipment is provided under a rental agreement and not Government Furnished Property. The proposed contract action will include continuous equipment rental, quarterly preventive maintenance, consumable filter replacements, resin tank exchange/regeneration, and certified hazardous waste transport is required to ensure uninterrupted mission readiness, personnel safety, and regulatory compliance. The contractor will provide all necessary personnel, supervision, tools, materials, and equipment required to perform preventative maintenance and repair services as identified in the PWS and IAW OEM equipment rental and servicing standards. Services include but are not limited to The scope of work includes the following tasks: Scheduled Maintenance: The contractor will perform on-site Preventive Maintenance (PM) actions on at least a quarterly basis or as needed based on system usage as specified by the original equipment manufacturer (OEM). This includes, at a minimum, verifying the calibration and proper operation of all differential pressure gauges, flow controllers, switches, and electronic sensors against Original Equipment Manufacturer (OEM) specifications. Replace the system’s pre-filtration media, replace ion exchange tanks, and ensure proper disposal of all Hazardous Materials IAW all applicable waste handling and disposal regulations. System Diagnostics and Repair: The contractor will conduct a complete diagnostic inspection of the system and all components to identify the cause of any operational defects. The contractor will execute all necessary repairs to restore the system to its original performance specifications. This proposed Sole Source action will be awarded following the procedures at RFO 12.201-1(e)(3). The installed system is provided under a rental agreement, and all equipment remains the property of Evoqua Water Technologies LLC, the OEM. Evoqua has not identified any third-party authorized distributors or servicers of their equipment. Market research included internal Government sources and strategic sourcing vehicles; no suitable sources were identified. Price evaluations found the cost associated with removal of the current system and installation/commissioning of a new system are not reasonably expected to be recovered through competition over the anticipated ordering period. Additionally, such transition efforts have the potential to disrupt paint booth operations, which could result in additional costs to the Government. Based on these considerations, and the equipment ownership and servicing restrictions, the Contracting Officer has determined, as authorized at RFO 12.102(a), that only one source is reasonably available to provide continued rental and servicing of the installed system. Establishment of a Sole Source BPA with Evoqua Water Technologies, LLC represents the best value and is in the best interest of the Government. This notice of intent is not a request for competitive quotations or proposals. However, interested parties may provide a capability statement with clear and convincing evidence identifying their ability to support this requirement as identified. Such parties must respond by Friday, 6 November 2026 by 1:00PM MST to Contracting Officer Patricia Murray at email: patricia.murray.6@us.af.mil or phone (520) 228-3095. Responses received will be evaluated; however, a determination by the Government not to compete the proposed action based upon responses is solely within the discretion of the Government.
-Pre-Solicitation11/06/2027
Proposed procurement for NSN 1240010460896 WORM SHAFT ASSEMBLY: Line 0001 Qty 90 UI EA Deliver To: DLA DISTRIBUTION ANNISTON By: 0221 DAYS ADO Line 0002 Qty 1 UI EA Deliver To: DLA DISTRIBUTION ANNISTON By: 0015 DAYS ADO All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
-Combined Synopsis11/23/2026
Indefinite Delivery Contract: Estimated quantity 2.000 ; Not to Exceed 350,000.00
-AwardedOpen

Additional Details

Solicitation Number

F4FDWL-26-R-0001

Archive Date

Jan 31, 2026

Office Address

WRIGHT PATTERSON AFB, OH, 45433-7108