GovChime
Notice ID: 8c05e5ebdd364192ab1eca4ff16cd440Special NoticeArchived

Data Acquisition Console

Archived on October 9, 2025. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 PM CDT
Posted
October 6, 2025
Notice type
Special Notice
Set-aside
No Set aside used
NAICS
332710: Machine Shops
Agency
Department of WarDepartment of the Air Force

Notice details

Place of performance
S Coffeyville, Oklahoma, 73145
Last updated
Nov 7, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
FA813225Q0039
Notice ID
8c05e5ebdd364192ab1eca4ff16cd440

Description

Purchase Award Information:

Offeror/Business Name: Advance Mfg. Co., Inc.,

City and State: Westfield, MA

Contract# FA813225P0055

Total Award Amount: $73,420.00

-----------

The Air Force intends to solicit and award a firm fixed price, single source purchase order contract to Advance Mfg. Co., Inc (Road Westfield, MA; Cage Code: 29293), under the authority of DAFFARS 5313.501 (10 U.S.C. 3572), for the purchase of the following requirement for the Oklahoma City Air Logistics Complex (OC-ALC).

• Two (2) Bore-scope Guide Tube - AMD -110-551 Data Acquisition Console tooling.
• Two (2) Front Gearbox ASSY AMD- 110-524 Data Acquisition Console tooling.
• Two (2) Rear Tear Down – AMD-110-558 Data Acquisition Console tooling.

The NAICS code for this requirement is 332710 with a size standard of 500 employees.

Contractor registration in the System for Award Management (SAM) – which results in receiving a unique, active CAGE Code – is required prior to receiving any contracts or orders from the Government in accordance with FAR 4.11.  Contractors can register electronically at https://sam.gov/ . 

Interested persons may identify their interest and capability to respond to the requirement by submitting a quote and information.  Electronic procedures will be used for this solicitation through SAM at https://sam.gov/.  No telephone requests.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Files (1)

  • P25-083 Data Acquisition Console Single Source Justification _Redacted 9.15.25.pdf

    1.2 MBAdded in Special Notice version 1Posted
    Download

Lifecycle

  1. 1
    Version 1Special NoticeArchived

    Data Acquisition Console

    Notice f7296699db2c4982a2c0c38712516846 on SAM.gov

  2. 3
    Version 3Special NoticeArchivedCurrent

    Data Acquisition Console

    Notice 8c05e5ebdd364192ab1eca4ff16cd440 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The Arnold Engineering Development Complex (AEDC) intends to solicit and negotiate with only one source, Carl Zeiss Industrial Quality Solutions, LLC (CAGE 9DRR4), for one new Zeiss PRISMO 16/24/14 Multiple Application Sensor System (MASS) Scanning Coordinate Measuring Machine (CMM). The requirement includes the CMM; required probes, stylus kit, workstation, CALYPSO/PiWeb software licenses and maintenance; delivery; installation; ISO-based acceptance testing; training; warranty; and technical support. The Government intends to award a Firm-Fixed-Price contract as a sole source, as implemented by 41 U.S.C. 1901 and RFO 12.201-1, because the requirement is available from only one responsible source. Carl Zeiss Industrial Quality Solutions, LLC is the sole manufacturer of the required PRISMO 16/24/14 CMM system. The Zeiss system is required to maintain compatibility with existing Zeiss CMMs, CALYPSO software, calibration and maintenance processes, service support, spare-parts inventory, and established operator training. No other manufacturer can provide the required Zeiss-manufactured system or satisfy the Government’s minimum requirements. This notice of intent is not a request for competitive quotes. However, all responsible sources may submit a capability statement, proposal, or quotation that clearly demonstrates the ability to provide the complete required Zeiss system and associated services. The Government will consider all responses received via email no later than 10:00 AM CST on Thursday, 12 November 2026. A determination by the Government not to compete this requirement based on responses to this notice is solely within the discretion of the Government. Information received will be considered solely for the purpose of determining whether to conduct a competitive procurement. Questions and capability statements shall be submitted to Ms. Ercia Anglin, Contracting Officer, at erica.anglin@us.af.mil and Ms. Maddux Golden, Contract Specialist, at maddux.golden@us.af.mil. If no affirmative written responses are received by the stated deadline, the Government intends to award to Carl Zeiss Industrial Quality Solutions, LLC.
-Special Notice11/12/2026
SYNOPSIS: #N68335-26-Q-1184 Anchor Tiedown Weldment Naval Air Warfare Center Aircraft Division - Kuwait F/A-18 E-F Super Hornet Program The Naval Air Warfare Center, Aircraft Division (NAWCAD) Lakehurst, NJ intends to negotiate on a sole source basis with Vital Link, Inc. (CAGE: 0ZV99) for the Anchor Tiedown Weldment (Part Number: 602145-01) hardware components in support of the NAWCAD Kuwait F/A-18 E-F Super Hornet Program. This order will procure two (2) Anchor Tiedown Weldments. The Anchor Tiedown Weldment is used during maintenance of the F-414 engine inside the test cell. The vendor will build/fabricate and conduct a pull test of the Anchor Tiedown Weldment. Vital Link, Inc., as the Original Equipment Manufacturer of the Anchor Tiedown Weldment, is the only source with the requisite knowledge, technical experience, and production-level data to produce these components. The components being procured are integral to the maintaining the F-414 engine and are critical to maintaining operational readiness. The Government intends to solicit and negotiate this requirement under the authority of 10 U.S.C. 2304(c)(1), FAR 6.302-1 - Only one responsible source and no other supplies or services will satisfy agency requirements. THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. However, the Government will consider all responses received within fifteen days after the date of publication of this synopsis. Registration in the System for Award Management (SAM) (https://www.sam.gov) is mandatory for consideration. A determination by the Government not to open the requirement to competition based on the responses to this notice will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Information provided herein is subject to change and in no way binds the Government to solicit for an award of a contract. PSC Code: 4920 – Aircraft Maintenance and Repair Shop Specialize Equipment NAICS Code: 332710 – Machine Shops - size standard 500
-Pre-Solicitation11/19/2026
Please see soliciation and its attachments. **Amendment 0001 to answer questions was posted on 21 October 2026** **Amendment 0002 to answer questions was posted on 26 October 2026**
-Solicitation10/28/2026
The Arnold Engineering Development Complex (AEDC) requires a long-term, sustainable source for the manufacture and/or refurbishment of critical components for its Arc Heater test facilities to support Department of War (DoW) objectives. The purpose of this Request for Whitepaper is to solicit a response from the vendor to establish the framework for a ten (10) year strategic agreement under the authority of 10 U.S.C. § 4022 (Other Transaction Authority for Prototype Projects). The entirety of this agreement will be executed under the prototype operational utility phase through yearly milestones (Year 1 through Year 10). When specific component orders are required, a modification will be issued to the corresponding yearly milestone to add a sub-milestone for that particular order. This RWP seeks to finalize the vendor’s approach to intellectual property and statutory compliance, and to formalize the proposed business and pricing structure. While this agreement establishes a ten-year ordering framework, it is intended to foster a resilient industrial base. The Government reserves the right to onboard additional vendors at any point during the period of performance. Should other qualified sources emerge, they may be added to the agreement to compete for future component orders.
-Solicitation04/20/2031
This is a combined synopsis/solicitation (CSS) for commercial items prepared in accordance with Revolutionary FAR Overhaul (RFO) Part 12. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued. Solicitation number FA813927Q0005 is issued as a request for quotation (RFQ) for the supplies in the table within the attached Combined Synopsis Solicitation (CSS) - FA813927Q0005 document. This acquisition is single source. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov. The Air Force Sustainment Center’s Maintenance Contracting Branch (AFSC/PZIMB, 3001 Staff Dr, Tinker AFB, OK 73145-3303) at Tinker Air Force Base, Oklahoma, intends to award a single Firm Fixed Price (FFP) contract. This acquisition is a single-source requirement for specific brand-name-only products. The single source vendor is B&M Distribution, Inc. (CAGE: 5M3Y2) on the basis of 6.103-2 Unusual and compelling urgency. Please review the entirety of the CSS document before submitting your response.
-Combined Synopsis11/16/2026

Additional Details

Solicitation Number

FA813225Q0039

Archive Date

Oct 9, 2025