GovChime
Notice ID: 2428a61e8d4a4e1ba25662aba43fbc0cSolicitation

Lagoon Evaporator

Archived on July 23, 2024. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
2:00 PM UTC−04:00
Posted
July 2, 2024
Notice type
Solicitation
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
333310: Commercial and Service Industry Machinery Manufacturing
Agency
Department of WarDepartment of the Air Force

Notice details

Office
FA4626 341 CONS LGC
Place of performance
Wolf Creek, MT, 59648
Last updated
Dec 4, 2025

Identifiers

Solicitation number
FA462624Q0045
Notice ID
2428a61e8d4a4e1ba25662aba43fbc0c

Description

A downdraft style waste water lagoon evaporator, 208V, 3 phase, 7.5 HP electric motor (5 HP consumed), less than 11 amps operating, 70 dB max at 75 ft, including power cable from onsite power to evaporator motor and mooring ropes needed to connect to onshore anchors. Dry weight not to exceed 800 lbs. Evaporator to be delivered (and assembled if needed) to Golf-01 Missile Alert Facility (MAF) near Bowmans Corner, MT.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:FA462624Q0045
  1. Solicitation

Award typically follows within 30–90 days after the response deadline. (estimate)

  1. 2×
    SolicitationCurrentJun 24, 2024

    Lagoon Evaporator

    Notice 2428a61e8d4a4e1ba25662aba43fbc0c on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The 355th Contracting Squadron intends to award a sole-source, Blanket Purchase Agreement (BPA) to Evoqua Water Technologies LLC, CAGE 72XB4 located at 11147th St Pittsburgh, PA 15201. The anticipate award date is 18 November 2026 with an ordering period of 1 December 2026 – 30 November 2031 for an amount not expected to exceed $70,000.00. Point of Contact: Patricia Murray, Contracting Officer 355th Contracting Squadron 3180 S. Craycroft Rd B2528 Davis-Monthan AFB, AZ 85707 Email: patricia.murray.6@us.af.mil Commercial Phone: 520-228-3095 NAICS: 333310 PSC: W046 Description of Supplies/Services: The requirement includes continuous equipment rental, preventative maintenance (PM), and service of the installed Industrial Wastewater Treatment System supporting industrial operations of paint booths for the 309th Aerospace Maintenance and Regeneration Group (AMARG). This current equipment is provided under a rental agreement and not Government Furnished Property. The proposed contract action will include continuous equipment rental, quarterly preventive maintenance, consumable filter replacements, resin tank exchange/regeneration, and certified hazardous waste transport is required to ensure uninterrupted mission readiness, personnel safety, and regulatory compliance. The contractor will provide all necessary personnel, supervision, tools, materials, and equipment required to perform preventative maintenance and repair services as identified in the PWS and IAW OEM equipment rental and servicing standards. Services include but are not limited to The scope of work includes the following tasks: Scheduled Maintenance: The contractor will perform on-site Preventive Maintenance (PM) actions on at least a quarterly basis or as needed based on system usage as specified by the original equipment manufacturer (OEM). This includes, at a minimum, verifying the calibration and proper operation of all differential pressure gauges, flow controllers, switches, and electronic sensors against Original Equipment Manufacturer (OEM) specifications. Replace the system’s pre-filtration media, replace ion exchange tanks, and ensure proper disposal of all Hazardous Materials IAW all applicable waste handling and disposal regulations. System Diagnostics and Repair: The contractor will conduct a complete diagnostic inspection of the system and all components to identify the cause of any operational defects. The contractor will execute all necessary repairs to restore the system to its original performance specifications. This proposed Sole Source action will be awarded following the procedures at RFO 12.201-1(e)(3). The installed system is provided under a rental agreement, and all equipment remains the property of Evoqua Water Technologies LLC, the OEM. Evoqua has not identified any third-party authorized distributors or servicers of their equipment. Market research included internal Government sources and strategic sourcing vehicles; no suitable sources were identified. Price evaluations found the cost associated with removal of the current system and installation/commissioning of a new system are not reasonably expected to be recovered through competition over the anticipated ordering period. Additionally, such transition efforts have the potential to disrupt paint booth operations, which could result in additional costs to the Government. Based on these considerations, and the equipment ownership and servicing restrictions, the Contracting Officer has determined, as authorized at RFO 12.102(a), that only one source is reasonably available to provide continued rental and servicing of the installed system. Establishment of a Sole Source BPA with Evoqua Water Technologies, LLC represents the best value and is in the best interest of the Government. This notice of intent is not a request for competitive quotations or proposals. However, interested parties may provide a capability statement with clear and convincing evidence identifying their ability to support this requirement as identified. Such parties must respond by Friday, 6 November 2026 by 1:00PM MST to Contracting Officer Patricia Murray at email: patricia.murray.6@us.af.mil or phone (520) 228-3095. Responses received will be evaluated; however, a determination by the Government not to compete the proposed action based upon responses is solely within the discretion of the Government.
-Pre-Solicitation11/06/2027
Proposed procurement for NSN 4610013456672 CYCLONE ASSEMBLY: Line 0001 Qty 5 UI EA Deliver To: W1A8 DLA DIST SAN JOAQUIN By: 0166 DAYS ADO The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Digitized drawings and Military Specifications and Standards may be retrieved, or ordered, electronically. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
-Combined Synopsis11/23/2026
Proposed procurement for NSN 4610013961465 FILTER ELEMENT,REVERSE: Line 0001 Qty 51 UI BX Deliver To: DLA DISTRIBUTION JACKSONVILLE By: 0032 DAYS ADO Approved sources are 0EY68 VM-77520; 62144 33-0020; 62144 8000 FIND 78; 62144 8054 FIND 3. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
-Combined Synopsis11/23/2026
Proposed procurement for NSN 1240010460896 WORM SHAFT ASSEMBLY: Line 0001 Qty 90 UI EA Deliver To: DLA DISTRIBUTION ANNISTON By: 0221 DAYS ADO Line 0002 Qty 1 UI EA Deliver To: DLA DISTRIBUTION ANNISTON By: 0015 DAYS ADO All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
-Combined Synopsis11/23/2026
This is a combined synopsis/solicitation for commercial item prepared in accordance with Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. Naval Surface Warfare Center Indian Head Division (NSWC IHD), located in Indian Head, Maryland intends to award a firm fixed price (FFP) purchase order using Simplified Acquisition Procedures for: 65” Dual Heat Wide Formant Roll Laminator. This solicitation will be competed as a Brand Name or Equal, Small Business Set-Aside. This announcement constitutes the only solicitation. Quotes are being requested under Request for Quotation (RFQ) no. N0017427Q1002. The NAICS code is 333310 and the business size standard is 1000. The provisions and clauses included and/or incorporated in this solicitation document are those in effect through the Federal Acquisition Circular. This RFQ incorporates all provisions and clauses in effect through Federal Acquisition Circular FAC 2025-06 and the Defense Federal Acquisition Regulation Supplement (DFARS) DPN 20251701. The Government will award a contract resulting from this solicitation to the vendor responsible whose quote, conforming to the solicitation that will be most advantageous to the Government, price and other factors considered. The Government intends to evaluate all timely quotes received from eligible vendors on a lowest price technically acceptable (LPTA) basis. The Government intends to evaluate quotations and award a contract without discussions with quoters. The Government reserves the right to conduct discussions if the Contracting Officer later determines them to be necessary. The Government will make award based on the availability of funds. Specifications: Laminator Series that delivers versatility, quality and economy all in one easy-to-use unit. The machine can laminate, encapsulate, and mount both vinyl and paper media. Its dual heated rollers can be controlled independently to temperatures up to 266ºF allowing for maximum adhesion for many applications. Operators can encapsulate using 1.5 – 10mil low melt films, cold laminate with PSA film, and board mount with just a few simple changeovers. Accepts film rolls to 10” OD on front and rear swing-out supply shafts for easier set-ups and fewer film changes and are available with a motorized rear rewind option for roll-to-roll applications. The swing up feed table and convenient 36” table height makes it easier for busy operators to stage multiple jobs. REQUIREMENTS Key requirements: Laminating Width up to 65" Dual Heated Rollers Adjustable Speed Control up to 13'/min Roller Gap Control allowing 1" Mounting Capability Web Clutch Adjustment Accommodates LOW MELT Laminating Film 1.5-10mil in Thickness/li> Two Swing-Out Shafts and Two Front Unwind Shafts Dual Tension Control Print Pressure Plate Installation Included 1 Year Mfr Warranty Parts and Labor Core Size – 3” Adjustable Temperature – Yes Moving Idler Bar – Yes Ready Light – Yes Mounting Capability – Yes (1”) Safety Approval – CE Roller Gap Adjustment - Yes Safety Shield – Yes Feed Table Alignment Guide – Yes Speed Feet Per Minute – 0 – 13 fpm Display Type - LCD Machine Dimensions – 69”W x 36” H X 49”D Electrical Requirements – 220V, 60Hz, 22 amps single phase: MAX 5700W Adjustable Speed Control – Yes Reverse Function – Yes Laminating Type – Hot/Cold Max. Laminating Width – 65” Warm up Time – 10 – 20 minutes Min/Max Film Thickness – 1.5 – 10 mil (Low Melt) Evaluation Factors (in order of importance) Technical – The Government will evaluate quotes on a Lowest Price Technically Acceptable (LPTA) basis. To be determined technically acceptable, the quote must clearly demonstrate compliance with all specifications listed under the "Requirements" section. Offerors proposing an "equal" product must submit descriptive literature, product data sheets, or technical specifications that explicitly verify the proposed machine meets or exceeds every key requirement. Price – Quotes must include all applicable costs. Submitted quotes are NOT TO EXCEED $350,000.00 (Simplified Acquisition Threshold). Questions/clarification regarding this solicitation must be submitted via email to Barbara Grinder @ barbara.j.grinder.civ@us.navy.mil by Wednesday 18 November 2026 by 4 PM EST. Quote packages are due by 24 November 2026 by 4 PM EST. (COB). Late quotes will not be considered. Please fill in clauses in RFQ as they apply to your business. Quote packages shall be sent to barbara.j.grinder.civ@us.navy.mil and contain a cover sheet that provides the following information: 1. Official Company Name; 2. Point of contact including name and phone number; and 3. DUNS number and Cage Code. The Points of Contact for this acquisition is: Barbara.j.grinder.civ@us.navy.mil
-Combined Synopsis11/24/2026

Additional Details

Solicitation Number

FA462624Q0045

Archive Date

Jul 23, 2024

Office Address

MALMSTROM AFB, MT, 59402-6863