GovChime
Notice ID: 791fb509ed484a4ea19bba5fbbde53eeSources SoughtArchived

Custom Metal Fabrication Services for Specialty Tactical Shelters and Ancillary Equipment

Archived on August 15, 2026. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
5:00 PM EDT
Posted
July 23, 2026
Notice type
Sources Sought
NAICS
332311: Prefabricated Metal Building and Component Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
AMC.ACC.ACC-CTRS.ACC-APG.W6QK ACC-APG NATICK
Place of performance
Natick, Massachusetts
Last updated
Oct 28, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
W911QY26RCUSTOMMETALFAB
Notice ID
791fb509ed484a4ea19bba5fbbde53ee

Description

Amendment 3

Q: Sheet 1 carries a marked note that the U-Channel is not shown correctly in Detail A or the Top and Bottom views. Can the Government confirm/issue a corrected Detail A and Top/Bottom view for the U-Channel (Find No. 3, Dwg. 17-3-4854) before award, or advise which view governs in the interim? 

   A: Drawing 17-3-4854 was revised and an updated drawing package was uploaded to the announcement.  Side view in 17-3-4850, Detail B, shows the correct positioning of U Channel, 17-3-4854.

Q: The U-Channel detail sheet specifies cross-section (2.00″ × 1.00″, .125″ wall) but does not dimension overall cut length. Please confirm the required finished length for the four U-Channel pieces called out on the weldment parts list (17-3-4851). 

   A: Drawing 17-3-4854 was revised and an updated drawing package was uploaded to the announcement.

Q: Drawing calls out Aluminum 6061-T6 and 6063-T5 per ASTM B221 throughout. Please confirm whether DFARS 252.225-7009 (specialty metals domestic melt/production) applies to this item, and whether mill test reports/certificates of conformance must accompany each delivery lot. 

   A: Unless otherwise stated, DFARS 252.225-7009 would not apply for purchases under the Simplified Acquisition Threshold (SAT).  Mill test reports/certificates of conformance are only required if stated on a purchase order.

Q: Removable panel spacer is specified as Nylon 6 (polyamide), off-white. Please confirm whether a specific commercial grade/durometer or flame-retardancy rating is required, or whether generic Nylon 6 stock is acceptable. 

   A: For this product, generic Nylon 6 stock is acceptable.

Q: Please confirm acceptable substitute/equivalent aluminum tempers or alloys (e.g., alternate 6000-series) in the event of raw-material supply disruption, and the process for requesting a material deviation. 

   A: Material deviations should be requested in writing (email), with supporting documents (material data, mark-up of drawings) and will require acceptance by the product engineers (final customer).

Q: Drawing calls for welding IAW ANSI D1.2. Please confirm whether a specific filler alloy (e.g., 4043 vs. 5356) is required or left to the fabricator's WPS, and whether WPS/PQR must be submitted for Government approval prior to production. 

   A: For this product, the government does not require approval of WPS and PQR.  Other products may have additional welding requirements stated on the drawings or purchase order.

Q: Please confirm the required weld inspection method and acceptance criteria — visual only per AWS/ANSI D1.2, or is additional NDE (e.g., dye penetrant) required on any joint?

   A: For this product, the government does not require additional NDE.  Other products may have additional inspection requirements stated on the drawings or purchase order.

Q: Rivets (MS24243/5A304, MS24243/5A406) and rivet-mount nut (MS21075-4N) are called out by standard number only. Please confirm no additional finish/plating beyond the standard MS material finish is required. 

   A: No additional finish/plating beyond the standard MS part finishes unless stated on drawing.

Q: Please confirm whether any non-destructive inspection (NDI) beyond standard ISO 9001:2015 dimensional/visual inspection is required (e.g., ultrasonic, radiographic, or dye-penetrant), and identify the applicable acceptance standard. 

   A: NDI beyond dimensional/visual inspection is not required unless called out on a drawing or required on a purchase order.

Q: Is a First Article Inspection (FAI) required prior to release of production quantities? If so, please identify the required FAI report format and submission timeline. 

   A: First article submission is not required unless requested as part of a purchase order.

Q: Please confirm the exact ink product or acceptable equivalents for the MIL-STD-130 marking requirement (25-high Gothic characters, black epoxy ink) or confirm any commercial equivalent meeting MIL-STD-130 is acceptable. 

   A: Unless the drawing states specific requirements for ink, commercial equivalent meeting MIL-STD-130 is acceptable.

Q: Please confirm required packaging/preservation level for shipment (e.g., MIL-STD-2073-1) and destination(s)/CLIN structure.

   A: Unless requirement for MIL-STD-2073 packaging is stated in a purchase order, then commercial packaging is acceptable.

Destination will be specified in the purchase order.  (Most likely it will be Natick).

Q: Please confirm total estimated quantity, delivery schedule, and whether the acquisition includes option quantities or is a base-plus-option/IDIQ structure. 

   A: Sources sought posting is for market research only.  Delivery schedule and contract structure not determined.

Q: Please confirm the small-business set-aside status of this acquisition (e.g., WOSB set-aside vs. full-and-open with WOSB consideration) and applicable NAICS size standard.

   A: Small-business set-aside status – not determined.  Sources sought posting is for market research only.

Q: Please confirm the data rights/distribution status of Dwg. 17-3-4850 and subordinate details for purposes of subcontracting any detail-part fabrication. 

   A: Dwg. 17-3-4850 is Distro A – Unlimited release

Amendment 2

Update to ECU frame drawing package updated with a change of 17-3-4854. This part was redesigned recently during fabrication due to a few issues and inconsistencies.

Amendment 1

Removed the requirement to specifically cost out fabrication of the ECU Frame Assembly per the attached drawing / technical data package (17-3-4850) as it is representative of current needs as well as any discounts provided for purchase quantities in excess of a single unit.

SYNOPSIS: This Sources Sought Announcement is to assist the US Army Combat Capabilities Development Command - Soldier Center (DEVCOM-SC) to identify potential sources to provide Custom Metal Fabrication Servies in support of the Soldier Sustainment Directorate Prototyping Branch.  

Background:  The Government (DEVCOM Soldier Center / Soldier Sustainment Directorate / Prototyping Branch) supports a variety of government managed specialty tactical shelter programs with unique metal fabrication requirements for a variety of DoW customers.   One major program is The U.S. Air Force’s Deployable Debriefing Facility (DDF) which provides secure, transportable, and mission-ready environments that allow pilots and aircrews to securely review flight data, decompress, and process information immediately after training exercises or real-world combat operations.   Other major programs include speciality shelters for the provision of medical care and collective protection from chemical and biological threats.  In addition to specialty tactical shelter components, different variants of passageways are also fabricated to complex or connect configurations of specialty shelters in various configurations.

Description: DEVCOM SC is in need of custom metal fabrication services based on government provided drawing packages, and is looking to establish a Blanket Purchase Agreement (BPA).

The contractor shall provide all management, labor, facilities, equipment, tools, and materials necessary to fabricate, machine, assemble, test, and deliver custom metal components, structural weldments, and sub-assemblies in accordance with government-furnished Technical Data Packages (TDPs), 2D drawings, and 3D CAD models. 

Example Government TDP:  ECU Frame Assembly, 17-3-4850 (Attached).

Precision Machining:  CNC milling, turning, drilling, and grinding of complex geometries with tolerances up to +/- 0.001 inches on various materials (aluminum, stainless steel, carbon steel, and specialty alloys).

Metal Fabrication & Welding:  Cutting (laser, waterjet, plasma), bending, forming, and structural welding. Welders must be certified to recognized standards (e.g., AWS D1.1, AWS D1.2, or military equivalents).

Surface Finishing:  Capability to apply or coordinate post-fabrication finishes such as powder coating, anodizing, plating (e.g., CARC paint, zinc plating), and non-destructive testing (NDI) or inspection.  Examples: MIL-DTL-5541 (Chemical Conversion Coating),  MIL-T-704 (CARC), T002-WH08 (Powder Coat), TT-C-490 (Zinc Phosphate), ASTM A967 (Stainless Steel Passivation).

Quality Assurance:  Maintain a robust quality management system compliant with ISO 9001:2015, AS9100, or equivalent military standards. Provide First Article Inspections (FAI) as required.  Parts Identified per MIL-STD-130.

Government Furnished Property:  (Equipment/Materials/Information/ComputerUtilization):  The government may provide materials and hardware when commercial sources are not available.

Deliverables:

Please provide a whitepaper that provides and overview of your company’s capabilities as well as a cost estimate to fabricate the ECU Frame Assembly per the attached drawing / technical data package 17-3-4850  

All documentation submitted shall be submitted as MS Word, Adobe PDF or MS PowerPoint formats.    

1. Respondents: The White Paper should be written in respondent format, double spaced, and minimum font size of 10 pt.  Paper should not exceed 10 pages, including cover.

    1. This paper should cover company information (company name, CAGE code, mailing address, and primary point of contact information (to include telephone number and email address).
    2. The paper should cover the 5 Ws, as applicable. (e.g., What, Where, When, Why and Who.   Example focus areas:
      1. Please discuss any/all relevant current products, services  and capabilities that currently meet or will be able to meet the requirements described above
      2. As applicable, please provide past examples of work completed for the government.
    3. For Foreign companies:  Discuss how the proposer will be able to work with the US Government in the future (i.e., US subsidiary or partner) if required.
    4. Additional documentation accepted (and not included in the page count for the White Paper) includes, but is not limited to, the following: PowerPoint overview presentations, workforce training documentation, web links for supporting information, etc. 

2. Certification and Accreditation (C&A) Documentation: Respondents are requested to provide any supporting documentation or certifications related to  technical capabilities, safety, and quality assurance management.

3. Cost.      

Interested parties are invited to submit a response to this Sources Sought Announcement. THIS IS A SOURCES SOUGHT ANNOUNCEMENT ONLY

This Sources Sought Announcement is issued solely for information and planning purposes and to identify interested sources. THIS IS NOT A SOLICITATION. No contract will be awarded from this announcement. This Sources Sought does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. It is subject to change and is not binding on the Government. Further, unsolicited proposals will not be accepted. Funding is not available at this time. The United States Army has not made a commitment to procure any of the items/services discussed, and release of this Sources Sought Announcement should not be construed as such a commitment or as authorization to incur cost for which reimbursement would be required or sought. Response to this Sources Sought Announcement is voluntary and no reimbursement will be made for any costs associated with providing information in response to this and any follow-on information requests. All submissions become Government property and will not be returned.

Not responding to this Sources Sought Announcement does not preclude participation in any future RFP if any is issued. If a solicitation is released, it will be synopsized on the SAM.gov website.  It is the responsibility of the potential responders to monitor this site for additional information pertaining to this subject.

RESPONSES:

The Government requests that responses be submitted electronically to


Interested parties may identify their interest and capability by sending responses regarding this requirement to DEVCOM-SC via e-mail ONLY to jean.m.trumpis.civ@army.mil  and john.h.fitek.civ@army.mil no later than July 31st 2026 at 5:00pm. The U.S. Government will not pay for any information or administrative cost incurred in response to this Notice. All costs associated with responding to this Notice will be solely at the expense of the interested party.


Please provide business size (indicate your socioeconomic status), applicable NAICS code, and CAGE code. If you hold a GSA Federal Supply Schedule contract, please identify your contract number.

QUESTIONS:
Any questions for clarification may be emailed to jean.m.trumpis.civ@army.mil and john.h.fitek.civ@army.mil no later than July 24th 2026 at 5:00pm. Verbal questions will NOT be accepted. Questions shall NOT contain proprietary or classified information. An unattributed list of questions and answers will be published at the same web location of this Sources Sought Announcement.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Files (1)

  • 17-3-4850 ECU Frame_Revised_17 July 2026.pdf

    363 KBAdded in Sources Sought version 3Posted
    Download

Lifecycle

  1. 1
    Version 1Sources SoughtArchived

    Custom Metal Fabrication Services for Specialty Tactical Shelters and Ancillary Equipment

    Notice fad1423e9e50466fb48fc9ba73ac81dd on SAM.gov

  2. 2
    Version 2Sources SoughtArchived

    Custom Metal Fabrication Services for Specialty Tactical Shelters and Ancillary Equipment

    Notice d14c740af71448b09ab26166dc847af5 on SAM.gov

  3. 3
    Version 3Sources SoughtArchived

    Custom Metal Fabrication Services for Specialty Tactical Shelters and Ancillary Equipment

    Notice 0d5b5893a15641348c94939193729d44 on SAM.gov

  4. 5
    Version 5Sources SoughtArchivedCurrent

    Custom Metal Fabrication Services for Specialty Tactical Shelters and Ancillary Equipment

    Notice 791fb509ed484a4ea19bba5fbbde53ee on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
***29 OCT 2026 - AMD 0004 issued*** ***20 OCT 2026 - AMD 0003 issued*** ***13 OCT 2026 - AMD 0002 issued*** ***10 SEP 2026 - AMD 0001 issued*** The Army Contracting Command - Detroit Arsenal (ACC-DTA) is issuing this Request for Proposal (RFP) to establish a new five-year, Firm-Fixed-Price (FFP), Indefinite Delivery/Indefinite Quantity (IDIQ) contract for the manufacture and delivery of four (4) variants of the S-280C/G Vehicle Mounted Shelter. This is a non-commercial requirement. Requirement: The S-280C/G is a lightweight, tactical military shelter designed to house and protect sensitive electronic equipment and personnel. Manufacturing shall be in strict accordance with the Government-owned Technical Data Package (TDP) and ASTM E1975-22. The scope includes First Article Testing (FAT), production, and delivery of all associated technical and logistics data. National Stock Numbers (NSNs): 5411-01-304-3069 (Shielded) and 5411-01-092-0892 (Unshielded). Set-Aside: This is a 100% Small Business Set-Aside. The applicable size standard for NAICS 332311 is 750 employees. Award Basis: The Government intends to award a single IDIQ contract to the responsible offeror whose proposal represents the best value to the Government. This will be a tradeoff source selection conducted in accordance with FAR Part 15. Contract Value: The minimum guaranteed value for this contract is $100,000.00. The maximum estimated contract ceiling is $4,000,000.00. Technical Data Package (TDP): The TDP for this solicitation is Export-Controlled (Distribution Statement C). To gain access, interested parties must have a current and valid DD Form 2345, "Militarily Critical Technical Data Agreement" certification on file with the U.S./Canada Joint Certification Office (JCO). The TDP can be accessed through the attachments section of this announcement on SAM.gov by certified offerors. Questions: All questions regarding this solicitation must be submitted in writing to the points of contact listed below no later than September 24, 2026 at 11:59 PM Eastern Time. Telephone inquiries will not be accepted. Points of Contact: Nicholas A. Lang, Contract Specialist, nicholas.a.lang.civ@army.mil Daniel J. Gibson, Contracting Officer, daniel.j.gibson43.civ@army.mil Disclaimer: Offerors are responsible for monitoring SAM.gov for any amendments to this solicitation.
-Solicitation11/13/2026
Prefabricated steel sheds with Installation Labor Solicitation
-Combined Synopsis11/16/2026
**W912EE** Amendment Three- The purpose of this amendment is to include pictures that were requested and to include ProjNet Questions and answers. There is no change to the Scope of Work or the Request for Quote due date. Amendment Two- The purpose of this amendment is to update the Scope of Work to include color of metal building. Scope of work says "paint of industrial enamel on color 'tan' with 'brown' trin & gutters. Please see attached Scope of Work. Amendment One - The purpose of this amendment is to update the Scope of Work details and change the set aside type to unrestricted. The request for quotes date is changed to November 6, 2026, at 3PM Central Time. Please see updated Scope of Work and Amendment. Arkabutla Lake Water Plant Rehab and Pre-fabricated Metal Building Installation This is a solicitation for commercial items prepared in accordance with the format in RFO Part 12, as supplemented with additional information included in this notice. Solicitation Number W912EE27QA002 is being issued as a request for quote (RFQ) with the intent to issue one Firm-Fixed Price Contract. This solicitation is being issued under 100% small business set aside. The NAICS code for this procurement is 332311, Prefabricated Metal Building and Component Manufacturing, with a size standard of 750 employees. This procurement is being conducted in accordance with regulations at RFO Part 12 - Acquisition of Commercial Products and Commercial Services. The U.S. Army Corps of Engineers, Arkabutla lake Project, has a requirement to procure one metal building to cover and protect the new well. Arkabutla Lake Project has previously had a new well installed and now requires the old well to be abandoned and the surrounding small 30 x 50 building to be rehabbed to continue to protect the new well. The USACE personnel will perform prep work prior to deliver and install by removing the old building where replacement pre-fabricated building will be delivered and installed. Please see below for details. General Specification: Abandon old well Install new plumbing includes valves to meet AWWA C-509 specs, flange fitting to meet AWWA specs, watts 2” pressure reducer, 2” flange master meter, Stenner model 45MHP10 chemical pump, 3 phase air compressor, accessories and fittings to connect and create a working system Purchase, deliver, & install one (1) 30’x50’ pre-fabricated metal Red Iron open span building with 12’ tall eaves, 26-gauge roof & walls, one (1) roll up door, one (1) 3’x7’ walk through door, insulation, and gutters. Building will include engineer’s stamped drawings for the building and a set of anchor bolt plans. Sand blast and paint tank with one (1) coat Tnemec-Zinc 3-5ml inside and out. Second coat inside Tnemec series 21 6-9ml. Third coat inside Tnemec series 216-9ml. Second coat outside L140 epoxy 6-9ml. Third coat outside 1094 urethane 5-7ml. Install new electrical including 200-amp enclosed circuit breaker outside (2020 NEC requirement), 200-amp main breaker panel inside, pump control panel with motor starter to control well, disconnect at well, six (6) 8” long LED strip lights, two (2) 55 watt outside lights with photocell, ten (10) 120V outlets including an outside GFCI, 3 phase circuit for air compressor, and reconnect existing pressure controls on tank The contractor shall provide all supervision, labor, tools, equipment, and tools necessary for purchase and installation no later than 120 days after award. Additional information about the specifications for this equipment is listed in the scope of work. All Offerors shall submit a quote with content as specified herein. Quotes submitted without the specified content may be determined unsuccessful and removed from further consideration. Offers are encouraged to review all clauses that are incorporated into this solicitation. ****SPECIAL ATTENTION SHOULD BE FOCUSED ON RFO 52.212-2 EVALUATION – COMMERCIAL PRODUCTS, AS THIS CLAUSE OUTLINES THE EVALUATION FACTORS AND BASIS FOR AWARD FOR THIS REQUIREMENT. **** The government intends to make one award for one firm fixed price contract. Offers for less than the required delivery will not be accepted. The Government intends to award without discussions while reserving the right to hold discussions if determined advantageous to the Government. Offerors are encouraged to provide their best proposed pricing in their initial offer. Notes to Offerors: A BIDDING SCHEDULE MUST BE SENT IN WITH YOUR QUOTE. Quotes shall be submitted electronically via email, to: afton.riles@usace.army.mil. For questions and technical inquiries please see instructions below. You are responsible for reading all information contained in this solicitation and all attachments if any posted with it. Offerors should check the SAM.gov web site often for modifications to this solicitation. Offerors are responsible for ensuring their quotes arrive timely. TECHNICAL INQUIRIES AND QUESTIONS Technical inquiries and questions relating to this solicitation are to be submitted via Bidder Inquiry in ProjNet at (https://www.projnet.org). Offerors are encouraged to submit questions early in the advertisement process, in order to ensure adequate time is allotted to form an appropriate response and amend the solicitation, if necessary. Any questions submitted within the 72 hours window of the solicitation closing date are not guaranteed a response will be provided. To submit and review inquiry items, prospective vendors will need to use the Bidder Inquiry Key presented below and follow the instructions listed below the key for access. The Solicitation Number is: W912EE27QA002, Arkabutla Lake Water Plant Rehab and Pre-fabricated Metal Building Installation The Bidder/Offeror Inquiry Key is: MX684V-PQ8W9T Specific Instructions for ProjNet Bid Inquiry Access: From the ProjNet home page linked above, click on Quick Add on the upper right side of the screen. Identify the Agency. This should be marked as USACE. Key. Enter the Bidder Inquiry Key listed above. Email. Enter the email address you would like to use for communication. Click Continue. A page will then open saying that a user account was not found and will ask you to create one using the provided form. Enter your First Name, Last Name, Company, City, State, Phone, Email, Secret Question, Secret Answer, and Time Zone. Make sure to remember your Secret Question and Answer as they will be used from this point on to access the ProjNet system. Click Add User. Once this is completed you are now registered within ProjNet and are currently logged into the system. Bidders/Offerors are requested to review the specification in its entirety, review the Bidder Inquiry System for answers to questions prior to submission of a new inquiry. The call center operates weekdays from 8AM to 5PM U.S. Central Time Zone (Chicago). The telephone number for the Call Center is 800-428-HELP.
-Combined Synopsis11/06/2026
THIS IS A SOURCES SOUGHT NOTICE ISSUED FOR MARKET RESEARCH PURPOSES ONLY. THIS IS NOT A SOLICITATION, REQUEST FOR QUOTATION (RFQ), OR REQUEST FOR PROPOSAL (RFP). The Government is conducting market research to identify qualified sources capable of providing support in Veracruz, Panama. The purpose of this notice is to identify capable sources, assess industry capability and availability, and obtain industry feedback regarding the anticipated requirement. This notice is issued solely for market research purposes and to provide industry with advance notice of a potential upcoming solicitation. A solicitation has not been issued at this time. Description: Requesting a rough order of magnitude (ROM) for estimated pricing, and capability plan, to support the purchasing and transport of materials / supplies at Veracruz, Panama to construct a 11M x 15M x 5.5M pre-engineered building with roof panels. The materials / supplies are to be delivered on site to an elementary school in Escuela Cosecha Amistad, Veracruz, Panama by March 2027. Need the interior of the canopy to be clear space so the kids can play soccer / basketball. Request for Deliverables: Vendors submit a Technical Capability Statement illustrating their ability to purchase and deliver pre-fabricated building supplies across Panama Provide a general Rough Order of Magnitude (ROM) outlining estimated costs for the purchase and delivery of the pre-fabricated building supplies at .Escuela Cosecha Amistad, Veracruz, Panama. If you can support this request, please submit the deliverables mentioned above by 09 Novembet 2026 by 12:00PM CST. Please email information to MAJ Vernon Shank at vernon.d.shank.mil@army.mil. Thank you for the support.
-Market Research11/09/2026
Climate Controlled Storage Building
-Combined Synopsis09/02/2026

Additional Details

Solicitation Number

W911QY26RCUSTOMMETALFAB

Archive Date

Aug 15, 2026

Office Address

NATICK, MA, 01760-5011