GovChime
Notice ID: 212778e34b4743c69539133eeeb95030PresolicitationArchived

F-35 Special Access Program Facility (SAPF)

Archived on December 5, 2025. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
2:00 PM MDT
Posted
November 26, 2025
Notice type
Presolicitation
NAICS
236220: Commercial and Institutional Building Construction
Agency
Department of WarDepartment of the Army

Notice details

Office
US ARMY CORPS OF ENGINEERS.ENGINEER DIVISION SOUTHWESTERN.ENDIST FT WORTH.W076 ENDIST FT WORTH
Place of performance
Ebbing Field ANG in Fort Smith, Arkansas, 72908
Last updated
Nov 5, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
W9127S-25-R-A001
Notice ID
212778e34b4743c69539133eeeb95030

Description

Please note this solicitation requires offerors to enter a National Institute of Standards and Technology (NIST) score in the Supplier Performance Risk System (SPRS). The NIST score is required before award. The North American Industry Classification System code for this procurement is 236220 (Commercial and Institutional Building Construction), which has a small business size standard of $45M.The Product Service Code is Y1BZ - CONSTRUCTION OF OTHER AIRFIELD STRUCTURES. The solicitation is anticipated to be issued on or about 4 September 2025 and proposals due on or about 02 Nov 2025.The estimated duration of the project is 730 calendar days from the notice to proceed. In accordance with DFARs 236.204, the magnitude of construction for this project is between $25,000,000 and $100,000,000.PROJECT SCOPE: The Government is seeking qualified, experienced sources capable of performing the following: Construct an F-35 Special Access Program Facility providing controlled workspace for ICD 705 compliant secure flight planning and training, unclassified aircrew training and administrative space, aircrew flight equipment storage and maintenance, and step desk to support combat crew functions. The facility is segregated to support up to three foreign countries using separate secure systems. The facility includes concrete floor slabs and footings on pile foundation, structural steel frame, brick masonry finish walls, concrete decking, and a combination pitched standing seam metal and flat roof. The facility has lightning protection, fire detection and suppression, intrusion detection, and all required supporting facilities to provide a complete and usable facility including utilities, pavements, site improvements, and communication support. Privatized utility connection fees are included in their respective supporting facilities line item. Facility will be designed as permanent construction in accordance with Department of Defense Unified Facilities Criteria 1-200-01. This project will comply with Department of Defense antiterrorism/force protection requirements per Unified Facilities Criteria 4-010-01. Air Conditioning: 195 Tons. Should this action be set-aside for small business, firms are reminded of the requirements under FAR 52.219-14, Limitations on Subcontracting. Firm will not pay more than 85% of the amount paid by the Government to the prime?s subcontractors that are not similarly situated. Any work that a similarly situated entity further subcontracts will count toward the 85% subcontract amount that cannot be exceeded. Cost of materials are excluded and not considered to be subcontracted. Should this action be solicited as Full and Open Competition, a Small Business Participation Proposal will be identified as an evaluation factor in the solicitation. Large Business(es) must comply with FAR 52.219-9 by submitting an acceptable Small Business Subcontracting Plan. The Government is still evaluating of a Project Labor Agreement will be required or waived. To be eligible for contract award, a firm must be registered with the System for Award Management (SAM) database. Register via the SAM Internet site at https://sam.gov/. No state level certifications will be accepted. After solicitation issuance, contractors may view and/or download this solicitation and all amendments at the following internet address: https://sam.gov/. The use of the website requires prior registration at https://sam.gov/. Plans and specifications will not be made available at https://sam.gov/ at issuance of solicitation. It is the Offerors responsibility to monitor the https://sam.gov/ web site for amendments to the solicitation. You must be registered with the System Award for Management (SAM), to receive a government contract award. Access: A ?SPRS Cyber Vendor User? role is required to enter Basic Assessment information. Step-by-step PIEE Access Instructions can be found here (copy and paste link into your browser)https://www.sprs.csd.disa.mil/pdf/SPRS_Access_Instructions.pdf. This solicitation and receipt of all proposals will be submitted through the Solicitation Module of the Procurement Integrated Enterprise Environment (PIEE) suite at https://piee.eb.mil/. There are 10 general steps a vendor must follow in order to use PIEE application modules. A complete list can be viewed at the following site: https://piee.eb.mil/xhtml/unauth/web/homepage/vendorGettingStartedHelp.xhtml#step5.For instructions on how to post an offer, please refer to the Posting Offer demo: https://pieetraining.eb.mil/wbt/sol/Posting_Offer.pdf. The Government reserves the right to use only the Internet as notification of any amendments to this solicitation. It is the offerors responsibility to view https://sam.gov/ Website daily for amendments to the solicitation. Accordingly, prospective contractors may view and/or download the solicitation and all amendments from the https://sam.gov/ website solicitation number W9127S25RA001.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Secondary Contact

Documents

Lifecycle

  1. 3
    Version 3PresolicitationArchived

    F-35 Special Access Program Facility (SAPF)

    Notice fd65a92b0de4439aa47023e9d4753406 on SAM.gov

  2. 6
    Version 6PresolicitationArchivedCurrent

    F-35 Special Access Program Facility (SAPF)

    Notice 212778e34b4743c69539133eeeb95030 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
PROJECT TITLE: F35 SPECIAL ACCESS PROGRAM FACILITY (SAPF)PROJECT LOCATION: EBBING AIR NATIONAL GUARD BASE FORT SMITH ARTYPE OF CONSTRUCTION: CONSTRUCTION OF A SQUAD OPS MISSION PLANNING FACILITY PROVIDING CONTROLLED WORKSPACE FOR ICD 705 COMPLIANTSECURE FLIGHT PLANNING AND TRAINING, UNCLASSIFIED AIRCREW TRAINING AND ADMINISTRATIVE SPACE, AIRCREW FLIGHT EQUIPMENT STORAGE ANDMAINTENANCE, AND STEP DESK TO SUPPORT COMBAT CREW FUNCTIONS.PROJECT TITLE AND LOCATION: F-35 SPECIAL ACCESS PROGRAM FACILITY, AT EBBING AIR NATIONAL GUARD BASE, FORT SMITH AR
100%
Solicitation02/20/2026
The U.S. Army Corps of Engineers (USACE), Tulsa District is issuing this Request for Qualifications (RFQ) for the design and construction of the FY28 KC-46A Aircraft Beddown Infrastructure Program at Altus Air Force Base, Oklahoma using Progressive Design-Build under 10 USC 2808a Other Transaction Authority. The KC-46A Aircraft Beddown Infrastructure Program at Altus AFB, Oklahoma, will deliver comprehensive flight-line, industrial maintenance, and advanced aircrew flight simulator training facilities necessary to support the 97th Air Mobility Wing (97 AMW) - the sole formal training unit for heavy mobility aircraft for the Department of the Air Force. This $235M consolidated capital program will modernize the infrastructure at the installation to replace Eisenhower-era KC-135 operations with the next-generation KC-46A Pegasus tanker while sustaining concurrent training and maintenance for its legacy fleets. The program will deliver three primary facility complexes along with associated airfield civil site infrastructure: KC-46A Aircraft Maintenance Hangar (General Maintenance); KC-46A Multipurpose Hangar (Corrosion Control and Open-Tank Fuel Cell Maintenance), and KC-46A Simulator Facility Phase 4 (Flight Training Center Expansion)
77%
Solicitation10/13/2026
Amendment 5: The purpose of this amendment is as follows: 1. Correction to description of CLIN 0016 (see 00 10 00). 2. Revised drawings/specifications (see Summary of Changes, dated 05/11/26). All other terms and conditions remain the same.
74%
Solicitation05/15/2026
**Amendment 0009: Provide specification changes.** **Amendment 0008: Remove the requirement for a Project Labor Agreement; a waiver has been received, extend the proposal deadline from July 7th, 2026, to July 31, 2026 at 12:00pm EDT, provide specification changes, and provide updated drawings.** **Amendment 0007: Provide updated Attachment A Price Schedule, provide specification changes, and provide updated drawings. ** **Amendment 0006: Extend the proposal deadline from June 1st, 2026, to July 7, 2026, at 12:00pm EST and confirm RFIs will not be re-opened. ** **Amendment 0005: Provides spec changes, updated wage determination and factor clarifications. The proposal due date remains unchanged at this time, due 1 June 2026.** **Amendment 0004: A. Remove Subsection b. File Packaging from Section 2. Proposal Files from CSI 00 21 16 Instructions to Proposers. The requirement for all proposals to be submitted via a zip file has been removed. B. Replace the entirety of Specification 01 33 29 in Specification Section 01 33 29 Sustainability Requirements and Reporting. C. Replace Paragraph 2.18.1 in Specification 28 31 76, Paragraph 2.18.1. D. Reissued multiple drawings with changes marked for the Voelz Access Control Point (ACP). E. Removed *at least 10 calendar days prior to the date established in the Request for Proposal (RFP) for receipt of proposals* requirement for RFI submission deadline and replaced it with *by 11 May 2026 at 11:00 AM EDT*. F. Provide Attendance Sheet for site visit held 22 April 2026.** **Amendment 0003: Updates Attachment K and adds a Citizenship Requirement to the CSI 00 73 00 supplemental text. The revised attachment clarifies the RSVP deadline as 14 April and reschedules the site visit for 22 April.** **Amendment 0002: Updates Attachments H and I for accessibility. Attachments H and I are updated and attached.** **Amendment 0001 Clarifications to site visit. See updated Attachments D and K.** In general terms, the project consists of a Design-Bid-Build acquisition strategy for construction services. Specific requirements include: New construction of an approximate 45,000 SF Rocket and Missile Maintenance Facility (RMMF) warehouse and associated administrative support functions. Adjacent to the RMMF is an approximate 10,000 SF storage building and 1,000 SF forklift charging shed. Associated site development includes but is not limited to earthwork, BMPs, fencing, roadways and hardscape areas that support the loading and unloading of munitions. The project further includes the replacement of the existing Voelz Gate Access Control Point (ACP) and associated hardscapes. The new ACP includes an approximate 1,600 SF combined gatehouse, inbound/outbound lanes with commercial vehicle inspection canopies, and associated active and passive vehicle controls. Associated site development includes but is not limited to earthwork, BMPs, fencing, roadways, and hardscape areas that support the operations of the access control point and commercial vehicle inspections.
70%
AwardedOpen
Amendment to the Sources Sought - November 10, 2026 The following questions have been added: How do our shipping restrictions affect your pricing, schedule, and risk? How does the Jones Act impact your logistics process, if at all? If regulations did not matter, what do you recommend to make the logistics and transportation process easier for US Government requirements? How does the Balance of Payments Program impact your list of suppliers? How frequent does the logistics process directly contribute to delays or cost increases? Have you lost revenue due to logistics delays/issues that could have been addressed earlier in the procurement process? Sources Sought Announcement FMF EC B-HAC Insular Air-Naval Station Hanger Renovation & Facilities Expansion U.S. Army Corps of Engineers (USACE) – Latin America and Caribbean District (SAA) ****SOURCES SOUGHT FOR MARKET RESEARCH PURPOSES ONLY**** This announcement seeks information from industry which will be used for preliminary planning purposes. No proposals are being requested or accepted with this announcement. THIS IS NOT A SOLICITATION FOR PROPOSALS AND NO CONTRACT SHALL BE AWARDED FROM THIS SYNOPSIS. NO SOLICITATION, SPECIFICATIONS OR DRAWINGS ARE AVAILABLE AT THIS TIME. 1. AGENCY: United States Army Corps of Engineers (USACE) Latin America and Caribbean District (SAA) 2. NAICS: 236220 - Commercial and Institutional Building Construction 3. PLACE OF PERFORMANCE: Insular Air-Naval Station (Estación Aeronaval Insular), San Cristobal Island, Galapagos Province, Ecuador. 4. ACQUISITION INFORMATION: The U.S. Army Corps of Engineers (USACE), Latin America and Caribbean District (SAA), is issuing this Sources Sought announcement to identify qualified, capable, and interested U.S. firms eligible to serve as prime contractors for a potential multi-phase Design-Build construction project at the Insular Air-Naval Station on San Cristóbal Island, Galápagos, Ecuador. The project is funded through Foreign Military Financing (FMF) and is subject to applicable Offshore Procurement (OSP) requirements. The anticipated acquisition will require an eligible U.S. firm to serve as the prime contractor, unless an exception or waiver is separately authorized by the appropriate approval authority. The results of this market research will inform the Government's acquisition strategy, procurement approach, assessment of U.S. contractor capabilities and interest, and evaluation of applicable OSP requirements. Limited U.S. contractor participation or competition does not, by itself, constitute approval of or establish entitlement to an OSP waiver. Any exception or waiver would require a separate determination and approval in accordance with applicable policies and procedures. Anticipated Contract Type: Firm-Fixed-Price (FFP) Design-Build (C-Contract) with a base requirement and option phases. Estimated Magnitude of Construction: $7million to $9 million Performance Period: 540 days after Notice to Proceed. Anticipated Award Date: Fiscal Year 2027 Quarter 3 In accordance with FAR 19.000(b)(1)(ii), the Procuring Contracting Officer (PCO) has elected not to apply FAR Part 19 (Small Business Programs) to this overseas procurement. Consequently, small business set-asides will not be utilized for this project in the Galapagos Islands, Ecuador. However, because this project is funded by Foreign Military Financing (FMF), standard statutory constraints require procurement from U.S. sources. All responsible U.S. sources—including both large and small business concerns—are highly encouraged to submit capabilities statements in response to this notice. The results of this market research will inform the Government's acquisition strategy, procurement approach, assessment of U.S. contractor capabilities and interest, and evaluation of applicable OSP requirements. Limited U.S. contractor participation or competition does not, by itself, constitute approval of or establish entitlement to an OSP waiver. Any exception or waiver would require a separate determination and approval in accordance with applicable policies and procedures. Foreign Military Financing (FMF) and Offshore Procurement (OSP): In accordance with Section 42(c) of the Arms Export Control Act (22 U.S.C. § 2791(c)), award is restricted to eligible U.S. firms, as an OSP determination has not been approved. The Government reserves the right to pursue an OSP determination if deemed in its best interest. U.S. prime contractors may utilize qualified local subcontractors, subject to applicable FMF and procurement requirements. 5. ANTICIPATED ACQUISITION STRATEGY: The final acquisition strategy will be determined based on the responses received from this Sources Sought notice, contractor availability, and stakeholder coordination. The Government is contemplating the following acquisition approaches: Primary Approach (Best Value Trade-Off (BVTO) Design-Build C-Contract with Options): Award a single Firm-Fixed-Price (FFP) Design-Build construction contract through a competitive Request for Proposals (RFP), utilizing a Lowest Price Technically Acceptable (LPTA) source selection approach, with options subject to funding availability. Base Requirement (Phases 1 & 2): Phase 1 – Hangar Renovation: Renovation and modernization of the existing aviation hangar to support Bell 430 rescue helicopters and Beechcraft King Air 350 aircraft. Phase 2 – Fuel Farm: Design and construction of a new fuel farm using a Design-Build-to-Budget (DB2B) approach, including demolition of the existing fuel facility. Option Package (Phase 3): Phase 3 – New Hangar: Design and construction of a new aviation hangar to support King Air 350 aircraft, exercisable based on funding availability and operational priorities. Offshore Procurement (OSP) Strategy Determination: U.S. Contractor Only Competition: If market research demonstrates sufficient interest and capability from responsible U.S. contractors capable of executing works in the Galapagos Islands, the solicitation may be restricted to U.S. firms in compliance with standard FMF guidelines. OSP Waiver / Unrestricted Competition: If responses indicate limited U.S. industry interest, severe logistical/cost premiums, or inadequate competition, USACE will utilize the findings of this market research to justify and process an FMF Offshore Procurement Waiver to allow foreign/host-nation firms to compete. 6. PROJECT DESCRIPTION: The contemplated scope consists of complete Design-Build to Budget (DB2B) services to include civil, geotechnical, structural, architectural, MEP (mechanical, electrical, plumbing), specialized fire suppression, aircraft maintenance utility integration, fuel containment/dispensing, demolition, and environmental protection compliant with both U.S. engineering standards (Unified Facilities Criteria - UFC) and host-nation Galapagos environmental regulations. The project is divided into three distinct phases of development. The Government has developed preliminary design documents to support the proposed requirements, which will serve as the basis for the contemplated Design-Build acquisition. The selected Design-Build contractor is anticipated to be responsible for completing the design and performing construction in accordance with the final contract requirements. Project Phase Phase 1 (Base) Primary Function/Facility: Existing Hangar Renovation (Supporting Bell 430 Rescue Helicopter & King Air 350) Key Technical Considerations: Design/Build (30%) documents for Renovation to the existing hanger for the Bell 430 rescue helicopter and King Air 350. Phase 2 (Base) Primary Function/Facility: New Aviation Fuel Farm & Legacy Demolition Key Technical Considerations: Design/Build (65%) documents for a new Fuel Farm and demo of the existing fuel farm Phase 3 (Option) Primary Function/Facility: New Aircraft Hangar (Supporting King Air SKA 350) Key Technical Considerations: Design/Build (65%) documents for a new Hangar for a new King Air SKA 3350 7. SOURCES SOUGHT: The purpose of this source sought is to gain knowledge of interest, capabilities and qualifications of contractors who have the capabilities to complete and perform contracts of this magnitude, and to address any questions, recommendations or concerns from Industry. The Government must ensure there is adequate competition among potential pool of responsible contractors. Prior Government contract work is not required for submitting a response under this Sources Sought announcement. The result of this market research will contribute to determining the method of procurement. 8. RESPONSES: The Capabilities Statement for this Sources Sought is not intended to be a Request for Proposal nor Invitation for Bid, nor does it restrict the Government to an ultimate acquisition approach. It is to request statements regarding the company's ability to demonstrate existing-or-developed expertise and experience in relation to the areas specified herein. Any commercial brochures or currently existing marketing material may also be submitted. This synopsis is for information and planning purposes only and is neither to be construed as a commitment by the Government nor will the Government pay for information solicited. Respondents will not be notified of the results of the evaluation. Interested parties are requested to provide a capabilities statement addressing the following areas. Section 1: Company Information Company Name, Address, and Website Point of Contact (Name, Title, Phone, Email) CAGE Code and SAM UEI Number Business Size and Status (e.g., Small Business, Large Business) Bonding: What bonding or guarantee methods are available to your company to secure contract performance and protect downstream subcontractor/labor payments for a project located in Ecuador? Please specify if your company utilizes US Treasury-listed Surety Bonds, Ecuadorian Bank Letters of Guarantee (Carta Fianza), or Insurance-backed Guarantees (Póliza de Caución). Relevant NAICS Codes Is your company a U.S.-based firm interested in participating as the prime contractor for this project? (Yes/No) Section 2: Interest and Experience in Ecuador Please confirm your company's interest in performing a design-build construction project of this magnitude and complexity in Galapagos Province, Ecuador or similar remote area. Summary of prior construction experience in Ecuador or South America. Address our minimum operational needs of experience with: Ecuadorian construction standards (Código Ecuatoriano de la Construcción), professional licensing requirements (Colegio de Ingenieros del Ecuador / Colegio de Arquitectos del Ecuador); Local labor laws, and tax/customs processes (SENAE and SRI). Describe your firm's capability to obtain the necessary permits and licenses required for construction work in Ecuador and to comply with all applicable host nation laws and regulations. Discuss your firm's experience with international logistics, including the transportation of materials and equipment to project sites in South America. Discuss your firm’s familiarity with base security clearance procedures, host-nation military vetting, and port access protocols. Section 3: Design-Build Qualifications and Technical Capabilities Interested firms are requested to provide information demonstrating their qualifications, relevant experience, and technical capabilities to execute the proposed multi-phase Design-Build (D-B) construction project. 3.1 Design-Build Qualifications and Relevant Experience Provide a brief overview of your firm's Design-Build experience as a prime contractor. Describe your firm's proposed D-B delivery approach, including the use of in-house design capabilities, joint ventures, or partnerships with qualified U.S., Ecuadorian, or international Architect-Engineer (A-E) firms. Provide up to three (3) examples of relevant Design-Build construction projects completed within the past five (5) years. For each project, identify the project name, location, contract value, year completed, scope of work, and your firm's role as prime contractor, joint venture partner, or subcontractor. Projects involving aviation facilities, aircraft hangars, warehouses, logistics facilities, military installations, fuel systems, or construction in remote locations are particularly relevant. 3.2 Specialized Aviation Fuel Facility Experience Describe your firm's experience designing, constructing, renovating, or upgrading aviation fuel storage and distribution facilities, including: Fuel storage tanks, pumping and transfer systems, and associated piping. Secondary containment, spill prevention, and environmental protection systems. Compliance with applicable safety and technical standards, specialized testing, and commissioning. Identify whether specialized aviation fuel system work would be performed using in-house resources or qualified specialty subcontractors. 3.3 Logistics and Local Execution Capabilities Provide an overview of your firm's proposed approach to executing construction on San Cristóbal Island, Galápagos, Ecuador, addressing the following: Material Procurement and Staging: Proposed sourcing, procurement, and staging of construction materials and specialized equipment in Guayaquil, Ecuador, or other suitable locations. Maritime Transportation and Port Operations: Proposed shipping routes, port-of-entry operations, and cargo handling at Puerto Baquerizo Moreno, San Cristóbal Island, or other suitable locations, subject to applicable host-nation, port, military installation, and security requirements. On-Island Transportation: Approach for transporting heavy construction materials and equipment from the port to the project site. Local Workforce and Subcontracting: Availability of qualified local subcontractors, specialty trades, and skilled labor, including anticipated use of U.S. and local resources. Environmental and Biosecurity Requirements: Experience addressing environmental restrictions, permitting, customs, and biosecurity requirements associated with construction in remote or environmentally sensitive locations. Logistical Challenges and Risk Mitigation: Identify anticipated logistical challenges and proposed strategies to minimize cost, schedule, and execution risks. Section 4: Market Research and Acquisition Considerations The Government seeks industry feedback to evaluate the feasibility of the proposed requirements, anticipated construction costs, performance period, acquisition strategy, and potential barriers to U.S. contractor participation. 4.1 Construction Cost and Market Conditions Based on your firm's experience, is the estimated construction magnitude of $7.181 million reasonable for the proposed scope and location? If not, explain the anticipated cost differences. What major cost drivers or premiums would you anticipate for construction in the Galápagos Islands, including shipping, equipment mobilization, labor, materials, and specialized subcontractors? Identify significant market conditions, such as local labor availability, supply chain limitations, and subcontractor capacity in Ecuador, that may affect project execution. 4.2 Schedule Feasibility and Execution Risks Is the proposed 540-calendar-day period of performance achievable for the base contract requirements, considering design, procurement, permitting, mobilization, construction, testing, and commissioning? What significant technical, logistical, environmental, or regulatory risks could affect successful project execution? What schedule adjustments or risk mitigation measures would you recommend improving project feasibility? 4.3 Offshore Procurement (OSP) and U.S. Contractor Participation Considering applicable Foreign Military Financing (FMF) and Offshore Procurement (OSP) requirements, what challenges could affect your firm's ability to compete and execute the project as a U.S. prime contractor? Describe anticipated reliance on U.S. versus non-U.S. materials, equipment, labor, and subcontractors, and identify any significant cost or logistical implications. What contracting arrangements, supply chain strategies, or industry partnerships would your firm consider supporting compliance with applicable OSP requirements? Responses will support the Government's market research and assessment of applicable procurement requirements. Any OSP exception or waiver would require a separate determination and approval by the appropriate authority. 4.4 Acquisition Strategy and Industry Interest What adjustments to the proposed acquisition strategy, project scope, phasing, or schedule would increase your firm's likelihood of submitting a proposal? Would your firm be interested in competing for a single Design-Build contract with a base requirement and additional optional phases? Would your firm be interested in participating in a virtual industry day to discuss the proposed requirements, project location, and anticipated acquisition strategy? 9. SUBMISSION INSTRUCTIONS: Format: Responses may be submitted in PDF or Microsoft Word format (suggested length: 3–6 pages). Brochures do not count towards this page count. Submission Deadline: Please submit your responses by 4:00 PM Atlantic Standard Time (AST) on 12 November 2026. No hard copies will be accepted. Submission Point of Contact: Please email responses directly to: Renee Booth, Contracting Officer: Meranda.R.Booth@usace.army.mil Jaclyn Yocum, Contract Specialist: Jaclyn.C.Yocum@usace.army.mil Subject Line for Replies: Market Research Response: Insular Air-Naval Station Hanger Renovation & Facilities Expansion, Galapagos Province, Ecuador - [Insert Company Name] 10. QUESTIONS: Questions regarding this Sources Sought Announcement may be directed to Contract Specialist, Jaclyn Yocum, at Jaclyn.C.Yocum@usace.army.mil AND Contracting Officer, Renee Booth, at Meranda.R.Booth@usace.army.mil. ****SOURCES SOUGHT FOR MARKET RESEARCH PURPOSES ONLY****
70%
Market Research11/12/2026

Additional Details

Solicitation Number

W9127S-25-R-A001

Archive Date

Dec 5, 2025

Office Address

FORT WORTH, TX, 76102-6124