Notice ID: d3ceaa7b32b620aec98b63f11090203bAward NoticeAwarded
34--Remanufacture and Retrofit of Landis 3RH Horizontal Grinder and CNC Controller
Awarded on September 26, 2011. Full description on SAM.gov.
Awarded tounder M0014611P9028 (source: SAM.gov award notice)• $497.0K
Overview
- Posted
- September 26, 2011
- Notice type
- Award Notice
- NAICS
- 333512: Classification Not Available
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- COMMANDING OFFICER
- PSC
- 34: METALWORKING MACHINERY
- Last updated
- Dec 5, 2025
- Award date
- Sep 26, 2011
- Award amount (SAM.gov award notice)
- $497.0K
Identifiers
- Solicitation number
- M0014611T9028
- Notice ID
- d3ceaa7b32b620aec98b63f11090203b
- Award number (PIID)
- M0014611P9028
Description
SEE RFQ M0014611T9028.
Award Overview
Award Number
M0014611P9028
Award Amount (SAM.gov award notice)
$497.0K
Award Date
Sep 26, 2011
Awardee
Original Solicitation
Notice ID: d3ceaa7b32b620aec98b63f11090203b
Posted Date: Sep 26, 2011
Original Response Deadline: Not specified
Contacts
Contracting Officer
Primary Contact
Willie B. Humphrey, Contract Specialist Telephone: 252-466-6279 Email: willie.humphrey@usmc.mil OR Sherry L. Kelly, Contracting Officer Telephone: 252-466-22846 Email: sherry.kelly@usmc.mil
Documents
No documents available.
Lifecycle
Solicitation:
M0014611T9028- Pre-Solicitation
- Solicitation
- Awarded
This opportunity has been awarded.
- 2×Pre-SolicitationApr 7, 2011
34--Remanufacture of Landis 3RH Universal Horizontal Grinder
- SolicitationJun 28, 2011
34--Remanufacture of Landis 3RH Universal Horizontal Grinder
- AwardedCurrentSep 26, 2011
34--Remanufacture and Retrofit of Landis 3RH Horizontal Grinder and CNC Controller
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Solicitation Information N6852027Q1003 is issued as a competitive procurement prepared In Accordance With (IAW) Federal Acquisition Regulation (FAR) Overhaul Part 12 Acquisition of Commercial Products and Commercial Services. Fleet Readiness Center East (FRCE), has a requirement to for the build-to-print assembly, contractor testing, packaging, and delivery of forty-eight (48) copies of each load box assemblies required for the V-22 OTPS 8 Upgrade for the use on the Navy's Consolidated Automated Support System (CASS) family of Automated Test Equipment (ATE). Load Box Assembly, WLB1 P/N 18D90975-1 48 each Load Box Assembly, WLB2 P/N 18D90976-1 48 each Load Box Assembly, WLB3 P/N 18D90977-1 48 each Full Statement of Work (SOW) is provided in the attached RFQ N6852027Q1003. Contract Type: The Government intends to purchase on a firm fixed-price basis. Offeror’s must be registered in the System for Award Management Registration (SAM) database prior to submission of an offer to be considered for award of any DoW contract. This may be accomplished electronically at http://www.sam.gov. Expenses incurred in the preparation of quotes in response to this RFQ are the vendor's sole responsibility and not reimbursable by the Government. All quotes/responses shall be submitted via email to Melinda Bowen at melinda.a.bowen.civ@us.navy.mil no later than 12:00PM Eastern Standard Time on 24 November 2026. ***Basis for Award*** Solicitation closing date/time is firm; proposals received after the deadline will not be accepted. Your quote will only be evaluated based on the information provided. The award will be made based on the evaluation criteria identified in the solicitation. Proposals that fail to comply with the provisions of the solicitation may be ineligible for award at the sole discretion of the Government. ***Instructions to Offerors*** Please include the following information with your response: 1. Blocks 30a-c signed on page 1 of N6852027Q1003 2. Acknowledgement via email confirming review 3. Cage Code: 4. Small Business: Yes ___ No ___ 5. Total Amount: _____________________ | - | Combined Synopsis | 11/24/2026 |
The Commander, Fleet Readiness Center (COMFRC) seeks qualified 8(a) vendors to provide Depot Level Maintenance support at Fleet Readiness Center East (FRCE), Cherry Point, North Carolina, in accordance with the draft Statement of Work. This is a Request for Information (RFI)/Sources Sought only. There is no solicitation available at this time. The RFI is issued for the purpose of conducting Market Research in accorcance with Federal Acquisition Regulation (FAR) part 10. Additionally, the Government is interested in quesitons/comments/feedback on the SOW. The intended contract will be for a one (1) year base period and four (4) Option periods. The submission of information is for planning purposes only and is not to be construed as a commitment by the Governmt to procure any items or services. Draft SOW is attached. The information will not be returned, and no compensation will be provided from any response to this announcement. Proprietary information and trade secrets, if any, must be clearly marked. All information received that is marked Proprietary will be handled accordingly. The applicable North American Industry Classification System (NAICS) code is 336411– Aircraft Manufacturing Interested 8(a) concerns should indicate interest in and capability to provide tasks identified above to the Contract Specialist (email below), in writing as early as possible, but no later than 5:00 PM EST, 10 June 2026 Potential vendors must have an active registration in the System for Award Management (SAM) in order to be eligible for award, as well as have NAICS 336411 identified in their SAM profile. Interested firms are requested to respond to this notice and include the following in their response: Firm’s information to include name of representative, address, phone number CAGE Code, DUNS number; Interest in nature of participation [e.g., prime contractor, teaming partner, primary subcontractor]; Business size [e.g., Small Business, HUBZone, SDVOSB, (Must provide certification of SDVOSB) WOSB ( Must provide Certification of WOSB certification) , SDB, Large Business] General Capability – Only a brief statement of qualifications (not to exceed five (5) pages double sided) is requested at this time. Interested contractors may provide the above information via e-mail to the electronic address listed below. All communications must be addressed to the Contract Specialist via e-mail ONLY. POC Contract Specialist: Jeffrey Smith, jeffrey.t.smith6.civ@us.navy.mil | - | Market Research | 06/10/2026 |
Fleet Readiness Center East (FRCE) invites interested parties to attend an Industry Day and Site Visit in support of an upcoming requirement for Depot Level Maintenance Support. Anticipated Acquisition Strategy: The Government intends to solicit this requirement as a competitive SBA 8(a) Business Development Program Set-Aside. Purpose: This event is designed to provide industry partners with an overview of FRCE’s depot-level maintenance, repair, and overhaul (MRO) requirements, tour primary facilities aboard MCAS Cherry Point and the North Carolina Global TransPark (GTP) in Kinston and foster early industry engagement prior to solicitation release. | - | Special Notice | 11/18/2026 |
SYNOPSIS: #N68335-27-Q-1003 PERISHABLE TOOLING FOR OUTER WING PANEL (OWP) AILERON HINGE REPLACEMENTS Naval Air Warfare Center Aircraft Division – F/A-18 E/F and EA-18G Outer Wing Panel (OWP) The Naval Air Warfare Center, Aircraft Division (NAWCAD) Lakehurst, NJ intends to negotiate on a sole source basis with J&S Tool, Inc. (CAGE: 1Y4A4) for the perishable tooling for the OWP Aileron Hinge replacements hardware components in support of the NAWCAD F/A-18 E/F and EA-18G Outer Wing Panel (OWP) Inboard and Outboard Aileron Hinge changes. The contractor shall provide materials and services to manufacture, assemble, inspect, ship, and deliver to the Government the perishable tooling. These perishable tools are designed to be used with OWP Inboard and Outboard Aileron Hinge Repair Tooling (Part Number (P/N): AFT74R092118-5003TD/-5004TD) per repair instructions detailed in AYC-1519. The Boeing Company (CAGE: 76301), as the Original Equipment Manufacturer (OEM) of the perishable tooling for the OWP Aileron Hinge replacements, is the only source with the requisite knowledge, technical experience, production-level data and ability to produce these components. However, in accordance with the Licensing Agreement, SES-M014-16-049, dated 5 May 2016, in place by the OEM, The Boeing Company, for the Perishable Tooling, The Boeing Company does not sell these parts directly to the Government but has allowed the Government to purchase certain equipment directly from accepted suppliers listed in the Boeing Licensing Arrangement for the Procurement of Perishable Tools. Therefore, this part will be procured on a sole source basis from the accepted/approved supplier J&S Tool, Inc. (CAGE Code: 1Y4A4). The Government intends to solicit and negotiate this requirement under the authority of 10 U.S.C. 2304(c)(1), FAR 6.302-1 - Only one responsible source and no other supplies or services will satisfy agency requirements. THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE PROPOSALS. However, the Government will consider all responses received within fifteen days after the date of publication of this synopsis. Registration in the System for Award Management (SAM) (https://www.sam.gov) is mandatory for consideration. A determination by the Government not to open the requirement to competition based on the responses to this notice will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Information provided herein is subject to change and in no way binds the Government to solicit for an award of a contract. PSC Code: 5180 – Sets, Kits, and Outfits of Hand Tools NAICS Code: 333515 – Cutting Tool and Machine Tool Accessory Manufacturing - size standard 500 | - | Pre-Solicitation | 11/19/2026 |
On-site OEM-approved repair, parts, labor, and functional testing are required for One Government-Owned Haas HS-4R Milling Machine (S/N: 2052422) at MDMC Production Plant Barstow in accordance with Performance Work Statement. Attached, Request for Quote, Performance Work Statement., Sole Source Justification and Approval and CDRL 0001. | - | Solicitation | 10/30/2026 |
Additional Details
Solicitation Number
M0014611T9028
Archive Date
Dec 31, 2011