GovChime
Notice ID: 3be4d194515d4b9d8ea97b02eec4adabPresolicitation

Indefinite-Delivery Indefinite Quantity Contract for Architect-Engineer Services for Planning and Engineering Services at Various Locations Worldwide, with Emphasis in the Pacific and Indian Ocean Areas

Archived on December 1, 2020. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
2:00 PM UTC−10:00
Posted
November 9, 2020
Notice type
Presolicitation
Set-aside
Small Business Set Aside - Total
NAICS
541310: Architectural Services
Agency
Department of WarDepartment of the Navy

Notice details

Office
NAVFACSYSCOM PACIFIC
Place of performance
JBPHH, HI, 96860
Last updated
Sep 25, 2026

Identifiers

Solicitation number
N6274220R0200
Notice ID
3be4d194515d4b9d8ea97b02eec4adab

Description

Please refer to the attachments for a full description of the requirement, selection criterions, and submission instruction. 10/14/2020: The purpose of this revision is to attach a consolidated list of questions received by firms and the Government's responses to those questions. No other changes have been made to this notice. 11/09/2020: The purpose of this revision is to extend the response due date from Tuesday, 11/03/2020 at 2:00pm HST to Monday, 11/16/2020 at 2:00pm HST. In addition, the Synopsis attachment is also revised to reflect this new resposne due date. No other changes have been made to this notice. The original Synopsis attachment that was posted on 09/29/2020 at 10:13am HST reflected a response due date of 11/16/2020 when it should have reflected 11/03/2020 instead. The Synopsis attachment was corrected on 09/29/2020 at 10:54am HST. However, due to confusion surrounding the different versions of the Synopsis attachment, an extension of the response due date to 11/16/2020 was determine appropriate.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

No documents available.

Lifecycle

Solicitation:N6274220R0200
  1. Pre-Solicitation

Formal solicitation typically follows within 30–60 days. (estimate)

  1. 4×
    Pre-SolicitationCurrentSep 29, 2020

    Indefinite-Delivery Indefinite Quantity Contract for Architect-Engineer Services for Planning and Engineering Services at Various Locations Worldwide, with Emphasis in the Pacific and Indian Ocean Areas

    Notice 3be4d194515d4b9d8ea97b02eec4adab on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
INDEFINITE DELIVERY/ INDEFINITE QUANTITY (IDIQ) CONTRACT FOR ARCHITECT-ENGINEER (A-E) SERVICES FOR FACILITIES WITH SECURED SPACES LOCATED THROUGHOUT NAVAL FACILITIES ENGINEERING SYSTEMS COMMAND AREA OF RESPONSIBILITY, WORLDWIDE
79%
Combined Synopsis12/10/2026
THIS IS A SOURCES SOUGHT SYNOPSIS FOR INFORMATION AND PLANNING PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL (RFP) AND NO CONTRACT WILL BE AWARDED FROM THIS ANNOUNCEMENT. This Sources Sought Synopsis is being used as a market research tool to determine the availability and adequacy of potential qualified small business sources prior to determining the method of acquisition and issuance of a solicitation for architect-engineer services. All Service-Disabled Veteran-Owned Small Businesses (SDVOSB), Veteran-Owned Small Businesses (VOSB), Economically Disadvantaged Women-Owned Small Businesses (EDWOSB), Women-Owned Small Businesses (WOSB), Small Disadvantaged Businesses (SDB) certified under the Small Business Administration’s (SBA’s) 8(a) Business Development Program, Historically Underutilized Business Zone Small Businesses (HUBZone SB) certified by SBA, and all other small businesses are encouraged to respond. If you are a HUBZone or an 8(a) Small Business, please submit the SBA Certification Letter or contact information for assigned SBA Business Development Specialist. Responses to this notice will determine the feasibility and/or basis for the Navy’s decision to proceed with an acquisition. Information received in relation to this notice will be used to assist the Government in developing an overall acquisition strategy, including the type and number of contracts and use of small business concerns. The Government is not obligated to and will not pay for any information received from potential sources as a result of this synopsis. Large business submittals will not be considered. NAVFAC Atlantic is seeking to identify potential sources with the capacity, experience and interest in competing for a contract for a Single Award Firm-Fixed Price (FFP) Indefinite Delivery/Indefinite Quantity (IDIQ) Architect-engineering (A/E) Contract for Environmental Planning and Engineering Services of an interdisciplinary nature for the implementation of National Environmental Policy Act (NEPA), Executive Order (EO) 12114, Environmental Effects Abroad of Major Federal Actions –Ship Homeporting and Related Operational Issues. The principal geographic area covered by this contract encompasses NAVFAC Atlantic's AOR, NAVFAC Pacific’s AOR and the adjacent waters of the Atlantic and Pacific oceans, including the Continental United States, the Caribbean, Europe, and North Africa. Additionally, tasks associated with this contract may be assigned anywhere in the world. The NAICS code for this proposed procurement is 541330 (small business size standard is $25.5 million). If the solicitation is issued, the solicitation will consist of a base period and four (4) one-year options totaling five (5) years of performance. The anticipated total work to be issued over the life of the contract via task orders (base year plus four one-year options) shall not exceed the estimated maximum amount of $75 million. The successful contractor to any forthcoming solicitation shall provide all labor, management, supervision, tools, materials, and all equipment necessary to perform the services listed below. The preponderance of the work under this contract shall involve the accomplishment of work in the following major categories, including but not limited to: The general scope of this contract requires engineering services, biological science, physical science, cultural resource, community planning, and military operations specialists. The engineers and community planners providing services under this contract must have competence attested by a licensor as a professional engineer or certified planner. The services required from the A-E firm or joint venture include, but are not limited to, architectural-engineering (A-E) or environmental services for the preparation of environmental planning documentation such as categorical exclusions (CATEX), environmental assessments (EAs), and environmental impact statements (EISs) under the National Environmental Policy Act (NEPA), environmental consultations and permits, as well as environmental reviews and environmental studies under EO 12114. The preponderance of the work under this contract shall be the preparation of various documents to support the proposed infrastructure-related actions with respect to ship homeporting issues. Examples of taskings required to complete this work may include analysis of port facility and infrastructure construction, renovation, and/or demolition; dredging; base realignment and closure (BRAC) actions; and proposed operational actions related to ship homeporting, waterfront activities and manned and unmanned asset activities. The contractor shall use the most up to date guidelines for preparation of the NEPA documentation. This includes Navy Instructions and the current version of the OPNAV 5090.1, Environmental Readiness Program, Marine Corps Instructions and the most current version of the P509.2, DoD Instruction 4715.11/12, and Department of War NEPA Implementing Procedures. Additionally, other tasks, studies, surveys, or documents may be required to complete the environmental planning documents including, but not limited to, environmental documentation for ship readiness and testing and training operations at the homeport locations and within Department of Defense-managed seaspace and Navy/Marine Corps training ranges, sketches, preliminary plans, cost estimates, descriptive text for future planning and work plans, modeling, geospatial analysis, information technology applications, traffics modeling and analysis, air quality modeling and analysis, noise modeling and analysis, encroachment analysis, and development and reproduction of a variety of public outreach materials of different media. For major testing and training exercises, the contractor shall be tasked with estimating marine mammal exposure from ordnance and sonar activities. In order to complete environmental planning documents in compliance with NEPA and EO 12114 and 12898, and in accordance with applicable DOD instructions, the contractor may be required to complete some of the following related studies and services to provide a comprehensive evaluation of the impacts to the environment: Air Conformity modeling and analyses under the Clean Air Act Air quality monitoring and testing Air quality management plans Coastal Consistency Determinations in accordance with the Coastal Zone Management Act Draft Letters of Authorization (LOA) and Incidental Harassment Authorization (IHA) applications Endangered Species Act Section 7 consultations, biological surveys, and Biological Assessments Essential Fish Habitat assessments In-water acoustic analysis Marine Mammal Density estimates Marine Resource Assessments Natural Resources surveys (species and habitat) Wetland delineation and mitigation plans (both wetland and near shore) National Historic Preservation Act (NHPA) and American Indian Tribe consultation support including cultural resource surveys (both architectural and archaeological), records management, and archaeological collection management/support Environmental permitting support Mitigation planning and support Socioeconomic analysis including Community Impact Studies and Environmental Justice Analyses Noise impact studies/modeling/monitoring (land and in-water) Noise analysis and the use of military aviation simulation model (NASMOD) Military Base Development Requirements to include Encroachment Action Plans for shore installations and at-sea operations and facility requirements analyses Range analysis to include documentation in support of Range Sustainability Environmental Program Assessments (RSEPA), Water RSEPA, Operational Range Clearance (ORC), Range Condition management Plans (RCMPs) Range containment modeling Fate and transport modeling and analysis Soil, sediment and water sampling Water quality studies to include chemical and physical analysis of dredge material and bioassays Toxic and hazardous waste studies (including Military Expended Materials) Health risk and toxicology analysis Storm Water Management studies Total Ownership Cost (TOC) or life cycle cost analysis Climate change and resiliency studies Greenhouse gas accounting and analysis Glint and glare modeling and analysis Hydrology and erosion studies Construction feasibility studies including slope, terrain, soils, watersheds, and seismic hazards Renewable energy feasibility studies Utility capability assessments and feasibility studies (electric, gas, sewer, and water) to support design plans Air Installation Compatibility Use Zone (AICUZ) studies Range Air Installation Compatibility Use Zone (RAICUZ) studies Safety analyses (Surface Danger Zones, Impact Zones, Accident Potential Zones, Clear Zones, and Danger Zones) Integrated Natural Resource Management Plans (INRMPs) and INRMP updates Integrated Cultural Resource Management Plans (ICRMPs) and ICRMP updates Modeling to determine tidal or sea-level rise impacts to shore lines and structures Geospatial analysis and map generation in accordance with current guidance Estimates of dredge and fill sediment volumes Hazardous waste reporting and analysis (i.e. EPCRA) Land Use Compatibility plans Development of water and air quality management requirements Construction design plans Traffic and transportation analysis, studies, and roadway designs Public involvement and outreach support Public participation planning and implementation Translation services for CATEX/EA/EIS and Public Notices Environmental Condition of Property (ECP) Literature reviews Watershed planning Installation master plans The contract requires the selected firm to have online access to e-mail via the Internet for routine exchange of correspondence. Statement of Capabilities Submittal Requirements: The Statement of Capability (SOC) will determine the feasibility and/or basis for the Navy’s decision to proceed with acquisition. Interested firms must submit a SOC, which describes, in detail, the firm’s capability of providing these services at various Military and other Federal facilities worldwide. Your Statement of Capabilities shall include the following: Company Profile Full name and address of the firm Point of Contact with position title, telephone number, and e-mail address Year firm was established Office location(s) Indication of System for Award Management (SAM) registration Unique Entity ID and CAGE Code Briefly describe your Federal contracting experience including locations at which your company has performed services similar to those described in this sources sought. Has your firm performed work in these locations? Number of employees and average annual receipts based on the last three (3) fiscal years Small Business Designation (include all socioeconomic categories) The Government will evaluate sources’ capabilities based on the following: 1. Prime and Key Consultants’ recent experience (within the last five years) with regard to the services listed above, knowledge of pertinent regulations, and experience working in a diverse geographical area(s). Provide up to five project examples within the past five years that demonstrate this experience. Provide the following information for each project listed: a. Contract number and project title; b. Name of contracting activity; c. Administrative Contracting Officer’s name and current telephone number; d. Contracting Officer’s Representative or primary point of contact name and current telephone number; e. Contract type (e.g., cost plus, requirements, firm fixed-price, indefinite delivery/indefinite quantity, or combination); f. Period of performance (start and completion date); g. Basic contract award amount and final contract value; h. Summary of contract work. i. If award fee or award term incentivized, average performance rating received. 2. Professional qualifications and capabilities of the staff to be assigned to the resulting contract; include experience within the past five years in the types of work addressed above. Firms will be evaluated in terms of their staff’s active professional registration, role expected to play in this contract, and roles played in the projects addressed in item 1 above. 3. Provide a brief description on the management plan for this contract; in particular, illustrate management’s approach/plan for managing multiple concurrent task orders for this contract and personnel roles in the organization. 4. If you are considering entering into a teaming arrangement, provide the name of all teaming partners and the anticipated type of teaming arrangements, address the anticipated services each member will provide, include applicable professional qualifications and experience for each member and to what extent your firm has worked with proposed subcontractors in the past. For other than bundled requirements, you may be able to joint venture with one or more small businesses and not be considered affiliated as long as each member of the joint venture is small under applicable NAICS code (13 CFR 121.103(h)(3)). If the procurement is ultimately set aside for small businesses, the small business prime will be required to comply with FAR 52.219-14, which states that at least 50% of the cost of contract performance incurred for personnel shall be expended by employees of the concern. Provide evidence that, on past contracts of similar nature, your firm (as prime contractor) was able to comply with requirement FAR 52.219-14 and will be able to comply with this requirement under the proposed contract. It is requested that interested firms submit a brief SOC to demonstrate the ability to meet and execute the requirements as set forth below. The SOC must be complete and sufficiently detailed to allow for a determination the firm’s qualifications to perform the defined work. The SOC must be formatted on Letter size (8.5x11 inch) paper, single spaced, Times New Roman, 12-point font minimum and is limited to twenty (20) single sided pages (including all attachments). Responses are due on Friday, 27 November 2026, by 11:00 AM EST. The package shall be sent electronically to erica.n.sears.civ@us.navy.mil. Questions or comments regarding this notice may be addressed to Erica Sears by e-mail at erica.n.sears.civ@us.navy.mil. LATE RESPONSES WILL NOT BE ACCEPTED. The Government will not provide a debriefing on the results of this notice. All information submitted will be held in confidential manner and will only be used for the purpose intended.
69%
Market Research11/27/2026
*10/21/2026- Amendment posted of Questions and responses posed by contractors. Submission due date reemains the same. THIS IS A SYNOPSIS OF PROPOSED CONTRACT ACTION. FOLLOW THE INSTRUCTIONS CONTAINED IN THIS NOTICE FOR RESPONDING TO THIS OPPORTUNITY. The Federal Bureau of Prisons (FBOP), Central (CO), anticipates the need for indefinitedelivery indefinite-quantity (IDIQ), firm fixed-price contracts for supplemental architect-engineer (A-E) services, with a one (1) year base requirement and up to four (4) unilaterally exercised option years, with a possibility for a six-month extention as well. The Government is not obligated to exercise any of the option periods. While the Government anticipates multiple awards, no more than four (4) awards are expected. The services will be for various FBOP facilities throughout the United States. See the Statement of Work attachment for description of services. Most projects will take place in a fully occupied, fully operational, secure correctional environment. Most projects require complex design effort and detail along with extensive coordination between design disciplines, the institutions, and Central Office during design and construction. Firms are to perform services as required by the issuance of individual task orders. The guaranteed annual minimum amount of each contract is $10,000.00 and the estimated annual maximum is $10,000,000. The North American Industrial Classification System (NAICS) code applicable to this requirement is 541310 (Architectural Services). Interested firms must be registered in the System for Award Management (SAM) at https://SAM.gov. This requirement will be fulfilled pursuant to the Federal Acquisition Regulation (FAR) 36.6 and the Brooks Act. Pursuant to FAR Deviation 36.201(b), for any firm(s) receiving award under this requirement, no construction contract may be awarded to the firm (including any of its subsidiaries or affiliates) that designs the corresponding project Firms having the capabilities to perform the services described in this announcement are invited to respond by submitting Parts I and II of the Standard Form 330 (Architect Engineer Qualifications) dated not more than 12 months before the date of this synopsis. The current version of the form along with any extra pages/sections may be retrieved from www.gsa.gov/forms (Type in "SF330" in the Form Name or Number block for a full listing of the associated forms. *** Include a cover letter detailing your firms name and main office address (as registered in sam.gov), UEI#, Tax ID# (TIN), CAGE code, and main point of contact for your firm through out the solicitation process (phone and e-mail). Submissions should be on standard 8.5'' x 11" format. No extraneous attachments. Selection criteria will be based on the following evaluation factors in descending order of importance: Specialized Experience and Technical Competence (32%) Capacity to Accomplish the Work in the Required Time (demonstrated ability to complete projects on time) (27%) Acceptability of an Established Team of Key Personnel (23%) Professional Qualifications Necessary for Satisfactory Performance (including licensed engineers and architects licensed Nationwide)(18%) Submit details (maximum of one page per project) of not more than five significant and/or complex renovation projects completed in the past five years (Utilize Section F of the SF-330). Identify the lead designer and address the design approach with salient features for each project. Discuss how the client's program, function, image, mission, economic, schedule and operational objectives were satisfied by the overall design/planning solution. Include tangible evidence where possible such as certificates, awards, peer recognition, etc., demonstrating design excellence. Provide a client reference contact for each project, including name, title, address, phone, fax, and email. Submit resumes of key personnel outlining commitment to projects and qualifications and relevant experience as individuals and as a team. Highlight sustainability features incorporated into the project design (e.g., energy/water efficiency, waste reduction, use of recycled materials). Submit a narrative outline of not more than one page describing the firm's project management planning, coordination, scheduling and production facilities, capabilities, and techniques for both design and construction inspection (Utilize Section H of the SF-330). Submit a narrative outline (maximum one page) with examples describing the firm's ability to evaluate/develop accurate preliminary project budgets, ability to control project costs during design process, ability to design within funding limitations, methods used to coordinate construction documents, work of various engineering disciplines, and provide general production quality control (Utilize Section H of the SF-330). No fax or paper submissions. Submit electronically through the JEFS APP BOX at link below: https://jefs.app.box.com/f/336fbbe977394048827a238f901db3a3 All submissions should be in Adobe format. Title the file in the following format: 15BBNF26R70000006_ Company Name_SF330 Architect Engineer (A/E) Services for Central Office Electronic copies of each submission shall be compatible with the following software products: Adobe Acrobat Reader 11 and Microsoft Office Suite 2016. Narrative portions of the submission shall be in Adobe Acrobat portable document file (pdf) searchable text format. The Submitter shall not embed sound or video (e.g., MPEG) files into the submission files. Electronic files shall be clearly identified for each volume, section, and item. The Submitter must ensure electronic files are virus-free and shall run an anti-virus scan before submission. Submissions by mail or hand carried will not be evaluated. All responses must be received no later than Wednesday, November 4, 2026, 10:00 AM MST. It is the responsibility of the Submitter to confirm receipt by contacting Alex Jackson, Contracting Officer, at a4jackson@bop.gov. Failure to submit all required information may result in rejection. All submissions received after the exact time specified for receipt shall be treated as late submissions and will not be considered except under facts and circumstances allowed by the Federal Acquisition Regulations (FAR). Based on these submissions, a short-list of no more than six (6) firms will be selected for an interview. Firms should be prepared to discuss their submittals and to demonstrate their ability to fulfill the contract requirements. Final selection will be based on SF-330 submissions and interviews. After the SF-330 review and interview process, four (4) selected firms will be invited to submit a formal proposal and must be prepared to negotiate overhead, profit, and hourly rates for anticipated disciplines for use in negotiating firm-fixed-price contract rates as well as firm-fixed-price task orders to be completed under the contract. All contract awards and task orders thereunder are subject to a determination of fair and reasonable pricing. This acquisition is 100 percent small business set-aside. Firms must be registered in SAM.gov as a small business (see FAR provision 52.219-1 in the Representations & Certifications section of the SAM registration. If you have questions about SAM.gov, Government procurements in general, or need assistance in the preparation of your bid/proposal/offer, a local Procurement Technical Assistance Center (PTAC) may be able to help. The Procurement Technical Assistance Program was authorized by Congress in 1985 in an effort to expand the number of businesses capable of participating in the Government marketplace. To locate a PTAC near you, go to http://www.aptac-us.org.
66%
Pre-Solicitation11/04/2026
This is a Sources Sought Notice only. This notice does not constitute a Request for Qualifications (RFQ), Request for Proposals (RFP), or Invitation for Bids (IFB), nor does it represent a commitment by the Government to issue a solicitation or award a contract. This Sources Sought Synopsis is issued solely for market research and planning purposes to determine the availability and adequacy of potential sources. It is not a Request for Proposals or Quotes and imposes no obligation on the Government to acquire any goods or services. Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. The Government reserves the right to determine the appropriate acquisition approach based on the results of this market research. Responders should not anticipate feedback regarding their submissions. The Government will not pay for any costs incurred in responding to this Synopsis; all costs associated with responding are solely at the responding party's expense. The information provided herein is subject to change and is non-binding on the Government. The purpose of this notice is to conduct market research to identify potential and qualified sources, assess industry capabilities, and establish effective acquisition strategies, including potential small business set-aside opportunities. No reimbursement will be provided for any costs associated with submitting information in response to this announcement or any follow-up information requests. Overview The General Services Administration (GSA), Public Buildings Service (PBS), is conducting market research to establish Multiple-Award Indefinite-Delivery, Indefinite-Quantity (IDIQ) contracts for comprehensive, multidisciplinary Architect-Engineer (A/E) services. These contracts are intended to provide integrated, sustainable, and adaptive design solutions across federally owned and leased real property nationwide. The Government anticipates awarding multiple contracts with multi-year ordering periods (5 year base with one 5 year option) to support GSA zones and client agencies across the United States and its territories. Expected typical project size is to be above the simplified acquisition threshold of $350,000. The potential place of performance for services rendered under this contract is on an as-needed basis for federal projects anywhere in the United States and its territories. This will require the capability to travel to GSA and other Government agency office locations nationwide. In some instances, performance of services is expected to require the capability for contractors to dispatch personnel to multiple locations simultaneously. The applicable North American Industry Classification System (NAICS) code for this requirement is 541310 (Architectural Services) & 541330 (Engineering Services), which has a small business size standard of $12.5 million and $25.5 million respectively. Scope of Services Services provided under the resulting IDIQ contracts will encompass a comprehensive range of professional A/E design and engineering disciplines. Scopes of work for individual task orders may include, but are not limited to, the following: 1. Core Project Life Cycle Services - These services cover the entire project lifecycle, from initial concept to post-construction closeout. Planning and Pre-Design Feasibility, pre-design, and project development studies Master planning Cost Estimating Real Estate Market Analysis Assessment and Investigation Existing conditions surveys, and field investigation Building condition survey evaluation reports (exterior and interior) Environmental investigation, reviews, inventories, and audits Energy audits and studies Design and Documentation Concept design, Design development, and Construction document development (both architectural and engineering) Interior design, including Furniture, Fixtures, and Equipment (FFE) Building standard documents Construction Support and Closeout Constructability review and evaluation Submittal and shop drawing review Management and inspection (M&I) services during construction and Construction inspection Building and system commissioning Post Construction Contract Services (PCCS); Record and close-out documents 2. Specialized Technical & System Design - Work requested often involves the assessment, repair, and upgrade of existing complex building systems. Mechanical, Electrical, and Plumbing (MEP) Full MEP services, including design of HVAC systems and electrical systems and lighting Assessment and design for mechanical components (e.g., pumps, fans, air handlers, water distribution systems) and air distribution Design of water and waste water systems, including performance of sanitary inspections Temperature control assessment and design and BAS system assessment and integration Building Structure and Envelope Structural evaluation and design Façade evaluation and remediation design Water infiltration investigation and mitigation design Safety, Security, and Compliance Fire and Life Safety evaluation and design Rehabs to improve energy efficiency and safety concerns Seismic & Blast protection and Vertical Transportation Code Compliance 3. Required AE Disciplines and Expertise - AE firms will need staff with licensed and/or specialized expertise in the following disciplines: Core Architectural and Engineering Disciplines Architecture and Interior Architecture Mechanical Engineering, Electrical Engineering, Structural & Civil Engineering, and Plumbing Historic Preservation Specialized Expertise A Qualified/Licensed Fire Protection Engineer (NCEES)* Security Space Planning & Workplace Cost Estimating and Scheduling Environmental Services Modernization and Quality Control Building Information Modeling (BIM) Quality control review and Report writing Submission Requirements Interested firms are invited to submit a written Capability Statement. Submissions must not exceed five (5) pages in length and must address the following elements: A. Company Profile Official company name, street address, telephone number, and primary website URL. Unique Entity Identifier (UEI) and Commercial and Government Entity (CAGE) Code. Office location(s) and primary design production facilities. Business size status under NAICS 541310 or 541330 (Large Business or Small Business). Applicable SBA socio-economic certifications (e.g., 8(a), HUBZone, Service-Disabled Veteran-Owned Small Business [SDVOSB], Woman-Owned Small Business [WOSB], or Economically Disadvantaged WOSB [EDWOSB]). B. Relevant Experience Summarize three to five (3–5) relevant projects completed within the past ten (10) years. Demonstrate experience in projects of similar scale, scope, and complexity, such as federal workplace design, major repairs and alterations, or complex building systems. Include project title, customer/agency point of contact, contract value, role (Prime or Subcontractor), and a brief narrative of the work performed. C. Nationwide Capacity Demonstrate organizational capacity to manage and execute multiple task orders simultaneously across diverse geographic locations nationwide. Describe key disciplines maintained in-house versus those typically fulfilled through subcontractor or joint venture arrangements. Submission Instructions Responses must be submitted electronically via email to the primary procurement contacts listed below: Submission Deadline: Primary Contact: Point of Contact Email: Subject Line Format: Sources Sought Response - National A/E IDIQ - [Firm Name] Hard copies, telephonic inquiries, and late submissions will not be reviewed or acknowledged. All information provided in response to this notice will be used strictly for market research and acquisition planning purposes. This notice encourages participation from qualified small business concerns, including socio-economic program participants, to assist GSA in evaluating the feasibility of small business set-asides for this procurement. All prospective offerors are responsible for monitoring SAM.gov for updates, future notices, or potential solicitations related to this requirement.
65%
Market Research11/13/2026
INDEFINITE DELIVERY ARCHITECT-ENGINEER CONTRACT FOR SURVEY, MAPPING AND RELATED SERVICES, PRIMARILY VARIOUS LOCATIONS, ALASKA THIS IS A SOURCES SOUGHT ANNOUNCEMENT ONLY. The US Army Corps of Engineers is conducting market research to facilitate a determination of acquisition strategy. The determination of acquisition strategy for this acquisition lies solely with the government and will be based on this market research and information available to the government from other sources. The U.S. Army Corps of Engineers, Alaska District, is conducting this market research to identify businesses which have the capability to perform the following work: The AE selected would be required to have sufficient staff, flexibility, and capability to be available on an as-needed basis. Typical types of services to be provided may include topographic, hydrographic, tidal determinations (gauging), aerial mapping (LIDAR), GPS control, boundary establishment, 3D digital mapping, office computations and other specialized surveys for use in developing “Plans and Specifications”. The selected firm must demonstrate the ability to provide Autodesk Civil 3D formatted drawings and all support files that conform with the Corps of Engineers CADD/GIS Technology Center A/E/C CADD Standards (version 5.0) using the most recent version of Autodesk Civil 3D at the time of contract and follow-on delivery order award. The applicable North American Industry Classification System (NAICS) code is 541370, Engineering Services, and the related small business size standard is $19 Million. THIS IS A SOURCES SOUGHT FOR QUALIFIED PRIME CONTRACTOR FIRMS ONLY. All interested firms are encouraged to respond to this announcement no later than 17 March 2026, 2:00 PM AST, by submitting all requested documentation listed below to: US Army Corps of Engineers, Alaska District, ATTN: CEPOA-CT-C/M (Nelsen), PO Box 6898, JBER, AK 99506-0898 or via email to brittney.morrison@usace.army.mil and michelle.nelsen@usace.army.mil Interested firms should submit a capabilities package (not exceeding 5 pages) demonstrating the ability to perform work listed above. Packages should include the following information: Business name, Cage code, address and business size under NAICS 541370 If a small business, identify small business type (HUBZone, SDVOSB, 8(a), Woman Owned Small Business, etc) (3) Demonstration of the firm's experience as a prime contractor on projects of similar size, type and complexity within the past five years. List actual projects completed and include project title and location, a brief description of the project to include dollar amount of the project and work that was self-performed. Responsible sources demonstrating relevant experience and the capabilities to perform the work will be considered. System for Award Management (SAM), as required by FAR 4.1102 and 4.1201, will apply to this procurement. Prospective contractors must be registered prior to award. Lack of registration in the SAM database will make an offeror ineligible for award. Information on SAM registration can be obtained via the Internet at https://www.sam.gov/SAM/
65%
Market Research03/17/2026

Additional Details

Solicitation Number

N6274220R0200

Archive Date

Dec 1, 2020

Office Address

JBPHH, HI, 96860-3134