GovChime
Notice ID: 1343d17d58833e106c3c4ad028f614a9Presolicitation

A--REMOTE MONITORING SYSTEM

Archived on June 25, 2019. Full description on SAM.gov.

Overview

Posted
June 18, 2009
Notice type
Presolicitation
Set-aside
Small Business Set Aside - Total
Agency
Department of WarDepartment of the Navy

Notice details

Office
NSWC CARDEROCK
PSC
A: RESEARCH AND DEVELOPMENT
Last updated
Sep 25, 2026

Identifiers

Solicitation number
N6554009T5268
Notice ID
1343d17d58833e106c3c4ad028f614a9

Description

This synopsis is being posted to both the Federal Business Opportunities (FBO) page located at http://wps.eps.gov and the Navy Electronic Commerce Online (NECO) site located at http://www.neco.navy.mil. While it is understood that FBO is the simple point of entry for posting of synopsis and solicitation to the Internet, NECO is the alternative in case FBO is unavailable. Please feel free to use either site to access information posted by the Naval Sea Systems Command. The Naval Surafce Warfare Center, Carderock Division, Philadelphia intends to procure Remote Monitoring System The system is being sought on a Sole Source basis from Vista Control Systems. Any questions regarding this solicitation should be in writing and emailed to stacey.thompson@navy.mil. See numbered notes 1 and 22.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

STACEY THOMPSON 215-897-7160

Documents

No documents available.

Lifecycle

Solicitation:N6554009T5268
  1. Pre-Solicitation

Formal solicitation typically follows within 30–60 days. (estimate)

  1. Pre-SolicitationCurrentJun 18, 2009

    A--REMOTE MONITORING SYSTEM

    Notice 1343d17d58833e106c3c4ad028f614a9 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Naval Air Warfare Center Aircraft Division (NAWCAD), Webster Outlying Field (WOLF), Airborne Systems Integration (ASI) Division intends to issue a competitive, total small business set-aside Request for Offers (RFO) under the SeaPort Next Generation (NxG) Multiple Award Contract for Airborne Systems Integration (ASI) Technical/Project Management Support (TPMS). The resulting Cost-Plus-Fixed-Fee task order will provide technical project-management, data-management, and acquisition support for ASI Division requirements. Support includes project planning, execution, monitoring, and closeout; division-level planning and performance reporting; data analytics, metrics, and repeatable best practices. The effort supports multiple defense acquisition programs and weapons systems, including—but not limited to—VH-92A, E-6B, unmanned carrier aviation, counter-uncrewed systems, V-22, and Naval Sea Systems Command Integrated Warfare Systems Program Executive Office requirements. Performance is anticipated at Government sites in St. Inigoes, Maryland, and Patuxent River, Maryland, with limited contractor-site performance within 50 drivable miles of NAWCAD WOLF. A Secret Facility Clearance Level is required.
-Solicitation12/15/2026
This is a combined synopsis/solicitation for commercial item prepared in accordance with Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. Naval Surface Warfare Center Indian Head Division (NSWC IHD), located in Indian Head, Maryland intends to award a firm fixed price (FFP) purchase order using Simplified Acquisition Procedures for: 65” Dual Heat Wide Formant Roll Laminator. This solicitation will be competed as a Brand Name or Equal, Small Business Set-Aside. This announcement constitutes the only solicitation. Quotes are being requested under Request for Quotation (RFQ) no. N0017427Q1002. The NAICS code is 333310 and the business size standard is 1000. The provisions and clauses included and/or incorporated in this solicitation document are those in effect through the Federal Acquisition Circular. This RFQ incorporates all provisions and clauses in effect through Federal Acquisition Circular FAC 2025-06 and the Defense Federal Acquisition Regulation Supplement (DFARS) DPN 20251701. The Government will award a contract resulting from this solicitation to the vendor responsible whose quote, conforming to the solicitation that will be most advantageous to the Government, price and other factors considered. The Government intends to evaluate all timely quotes received from eligible vendors on a lowest price technically acceptable (LPTA) basis. The Government intends to evaluate quotations and award a contract without discussions with quoters. The Government reserves the right to conduct discussions if the Contracting Officer later determines them to be necessary. The Government will make award based on the availability of funds. Specifications: Laminator Series that delivers versatility, quality and economy all in one easy-to-use unit. The machine can laminate, encapsulate, and mount both vinyl and paper media. Its dual heated rollers can be controlled independently to temperatures up to 266ºF allowing for maximum adhesion for many applications. Operators can encapsulate using 1.5 – 10mil low melt films, cold laminate with PSA film, and board mount with just a few simple changeovers. Accepts film rolls to 10” OD on front and rear swing-out supply shafts for easier set-ups and fewer film changes and are available with a motorized rear rewind option for roll-to-roll applications. The swing up feed table and convenient 36” table height makes it easier for busy operators to stage multiple jobs. REQUIREMENTS Key requirements: Laminating Width up to 65" Dual Heated Rollers Adjustable Speed Control up to 13'/min Roller Gap Control allowing 1" Mounting Capability Web Clutch Adjustment Accommodates LOW MELT Laminating Film 1.5-10mil in Thickness/li> Two Swing-Out Shafts and Two Front Unwind Shafts Dual Tension Control Print Pressure Plate Installation Included 1 Year Mfr Warranty Parts and Labor Core Size – 3” Adjustable Temperature – Yes Moving Idler Bar – Yes Ready Light – Yes Mounting Capability – Yes (1”) Safety Approval – CE Roller Gap Adjustment - Yes Safety Shield – Yes Feed Table Alignment Guide – Yes Speed Feet Per Minute – 0 – 13 fpm Display Type - LCD Machine Dimensions – 69”W x 36” H X 49”D Electrical Requirements – 220V, 60Hz, 22 amps single phase: MAX 5700W Adjustable Speed Control – Yes Reverse Function – Yes Laminating Type – Hot/Cold Max. Laminating Width – 65” Warm up Time – 10 – 20 minutes Min/Max Film Thickness – 1.5 – 10 mil (Low Melt) Evaluation Factors (in order of importance) Technical – The Government will evaluate quotes on a Lowest Price Technically Acceptable (LPTA) basis. To be determined technically acceptable, the quote must clearly demonstrate compliance with all specifications listed under the "Requirements" section. Offerors proposing an "equal" product must submit descriptive literature, product data sheets, or technical specifications that explicitly verify the proposed machine meets or exceeds every key requirement. Price – Quotes must include all applicable costs. Submitted quotes are NOT TO EXCEED $350,000.00 (Simplified Acquisition Threshold). Questions/clarification regarding this solicitation must be submitted via email to Barbara Grinder @ barbara.j.grinder.civ@us.navy.mil by Wednesday 18 November 2026 by 4 PM EST. Quote packages are due by 24 November 2026 by 4 PM EST. (COB). Late quotes will not be considered. Please fill in clauses in RFQ as they apply to your business. Quote packages shall be sent to barbara.j.grinder.civ@us.navy.mil and contain a cover sheet that provides the following information: 1. Official Company Name; 2. Point of contact including name and phone number; and 3. DUNS number and Cage Code. The Points of Contact for this acquisition is: Barbara.j.grinder.civ@us.navy.mil
-Combined Synopsis11/24/2026
The Naval Surface Warfare Center Indian Head Division, NSWC IHD, announces its intention to procure, on a competitive basis and as a Total Small Business Set-Aside, Engineering, Testing, Analyses, and Specialized Services, ETASS, for various programs and projects aligned to NSWC IHDs sponsors and associated mission sets as a SeaPort-NxG MAC task order. THIS ADVANCE NOTICE IS NOT A REQUEST FOR PROPOSAL. It is a notification to industry of the Governments intent.
-Special Notice11/24/2026
DISCLAIMER THIS SOLICITATION NOTICE IS FOR INFORMATIONAL PURPOSES ONLY AND IS NOT A REQUEST FOR QUOTES. THIS SOLICITATION NOTICE IS TO INFORM POTENTIAL QUOTERS THAT THE FORMAL SOLICITATION FOR THE INFORMATION MONITORING AND PROTECTION SERVICES - MODULAR PROJECT IS AVAILABLE VIA GSA eBuy (https://www.ebuy.gsa.gov/ebuy/). GSA eBuy Solicitation Information Title: FRCSE Information Monitoring and Protection Services - Modular Project ID: RFQ1839877 Reference/RFQ #: N6852027Q1007 NAICS: 561612 SIN(s): 561110, 334512 Set Aside: Small Business Any questions or concerns can be made via email to the Contract Specialist, Massoud Koleini, massoud.m.koleini.mil@us.navy.mil and Contracting Officer, Beverley Rhamdeow, beverley.s.rhamdeow.civ@us.navy.mil. The Government will not accept any quotations submitted via SAM.gov or email. All quotes must be submitted using GSA eBuy.
-Special Notice11/30/2026
Solicitation N0042127Q1026 is issued as a combined synopsis/solicitation. The NAWCAD Webster Outlying Field (WOLF) OPD Division intends to purchase on a firm fixed-price basis and to solicit and negotiate the proposed purchase order on sole source basis with CAMCO-Ne, LLC under the authority of FAR Part 12 and FAR Part 13. Offerors must be registered in the System for Award Management (https://www.sam.gov/sam/) database prior to submission of an offer to be considered for award of any DoD contract. Interested persons may identify their interest and capability to respond to the requirement or submit proposals. This notice of intent is not a request for competitive proposals. However, all proposals received by 4:00 PM (ET) on 12 NOVEMBER 2026 will be considered by the Government. Interested vendors MUST be approved resellers/distributors as verified by the OEM. A determination by the Government not to compete this proposed contract based upon the responses to this notice is solely within the discretion of the government. Information received will normally be considered for the purpose of determining whether to conduct a competitive procurement. The Government will not pay for any information received. Please provide the following information with your response: FOB: ______________________ Shipping Cost: ______________ Tax ID# ____________________ UEID# _____________________ Cage Code: _________ You must be registered in System for Award Management (SAM.Gov) Business Size: Small Business Yes or No GSA or SEWP Contract # if applicable: ________________________ Estimated delivery time after issuance of purchase order ____________________ Published Price list. Total quote price: *YOU MUST SUBMIT SIGNED DOCUMENTATION FROM THE OEM VERIFYING YOU ARE AN AUTHORIZED DISTRIBUTOR. IF YOU DO NOT, YOUR QUOTE WILL NOT BE CONSIDERED*
-Combined Synopsis11/12/2026

Additional Details

Solicitation Number

N6554009T5268

Archive Date

Jun 25, 2019

Office Address

BETHESDA, MD, 20817-5700