Notice ID: a0e19d3f20cc4b40a1a9300f41e72a33Solicitation
Depot Level Maintenance Support Services FRCSE Jacksonville, FL
Archived on December 2, 2023. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 5:00 PM UTC−05:00
- Posted
- November 8, 2023
- Notice type
- Solicitation
- Set-aside
- 8(a) Set-Aside (FAR 19.8)
- NAICS
- 336411: Aircraft Manufacturing
- Agency
- Department of WarDepartment of the Navy
Notice details
- Office
- NAVAL AIR SYSTEMS COMMAND
- Place of performance
- Jacksonville, FL, 32212
- Last updated
- Sep 25, 2026
Identifiers
- Solicitation number
- N6852023R0031
- Notice ID
- a0e19d3f20cc4b40a1a9300f41e72a33
Description
11/08/23 - See attachment section for RFP Amendment 0002, and updated L-3 Past Performance Information Form Rev1, as well as updated Question and Answers 11-08-23 PDF. PROPOSAL DUE DATE 17 NOV 2023 REMAINS THE SAME. 10/26/23- See attachment section for RFP Questions and Answers, RFP Amendment 0001, and attachment 5 DLM LOE_Ordering Rates Rev 0001, as shown below proposal due date of 17 November 2023 remains the same. REQUIREMENT: THIS NOTICE IS CONNECTED WITH PRE-SOLICITATION NOTICE ID N6852024R0001 (ERRONEOUS NUMBER) POSTED 18 SEPTEMBER 2023. OFFICIAL SOLICITATION NUMBER AND NOTICE ID ARE N6852023R0031 The purpose of this notice is to release the OFFICIAL solicitation, N6852023R0031, to initiate a competitive source selection and award a contract in support of Depot Level Maintenance (DLM) for Fleet Readiness Center (FRC) South East (SE) located at Naval Air Station (NAS) Jacksonville, FL to include it’s remote sites at: Naval Station (NS) Mayport, FL; Cecil Commerce Center (Cecil Field) in Jacksonville, FL and Fleet Readiness Center Mid-Atlantic (FRCMA) aboard NAS Oceana, VA, and NS Norfolk, VA. The DLM shall provide support services for aircraft, aircraft engines and associated components and material undergoing DLM. This is to include modernization, conversion, in-service repair, disassembly, and all other categories of aircraft DLM. The contractor shall perform DLM functions, alongside government civilian and military personnel, that consist of the rework of existing aviation end items, systems, and components, which include maintenance and modification functions; manufacture of items and component parts otherwise not available; in-service repair, disassembly and all other categories of aircraft DLM. Proposals will be due NLT 05:00PM Eastern on 17 November 2023. The contract is anticipated to be awarded as late as the third quarter of FY 2024, depending on the necessary duration of the source selection evaluation phase. CONTRACT TYPE: The anticipated contract is a single-award IDIQ with Cost-Plus Fixed-Fee (CPFF) Term form (level of effort) for labor and Cost for travel. The Period of Performance (PoP) of this contract shall continue for 60 months after date of award. Individual task orders will have their own Period of Performance (POP). This contract will be covered by the Service Contract Act, pursuant to FAR Part 22. ELIGIBILITY: This procurement is hereby solicited as an 8(a) small business competitive set-aside. ELECTRONIC PROPOSAL SUBMISSION In accordance with Solicitation N6852023R0031, Section L, Part A: General Instructions, Section 4.0: 4.0 Electronic Proposal Submission The submission date for all Volumes shall be no later than the date and time specified in Block 9 of the SF 33 of the RFP. All volumes of the proposal shall be submitted electronically through the Solicitation Module of the Department of Defense (DoD) Procurement Integrated Enterprise Environment (PIEE) at https://piee.eb.mil. No other submissions, such as mail, hand-carried, or other electronic system (e.g., DOD SAFE) are authorized by the solicitation unless specifically authorized by the Contracting Officer pursuant to paragraph 4.1 below. For instructions on how to post an offer, please refer to the Posting Offer demo: https://pieetraining.eb.mil/wbt/sol/Posting_Offer.pdf. Original Notice Sources sought request for information announcement, N6852023R0031, Depot Level Maintenance Support Services FRCSE Jacksonville, FL was released 24 March 2023 during the market research phase. QUESTIONS/COMMENTS: Questions or comments regarding this notice can be directed to Nancy Morris by email at nancy.t.morris.civ@us.navy.mil. Each question or comment should reference the applicable document, page number, and paragraph number. Offerors shall not include any proprietary information in a question, because the Government will provide the question and answer to all potential offerors. All questions must be submitted no later than 5:00PM Eastern, 13 October 2023. The Government will provide answers back to Industry NLT 30 days after RFP release. Questions received after the deadline above may be answered at the Government’s sole discretion. DO NOT SEND QUESTIONS TO THE GOVERNMENT THROUGH PIEE Contracting Communication Module (CCM) Attached are the solicitation documents.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
No documents available.
Lifecycle
Solicitation:
N6852023R0031- Solicitation
Award typically follows within 30–90 days after the response deadline. (estimate)
- 3×SolicitationCurrentSep 28, 2023
Depot Level Maintenance Support Services FRCSE Jacksonville, FL
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
SOURCES SOUGHT MARKET RESEARCH SURVEY FOR PLANNED MAINTENANCE INTERVAL CONTRACT FOR E-6B 1.0 INTRODUCTION a. The Fleet Readiness Center Southeast (FRCSE) requires contractor services to execute Planned Maintenance Interval (PMI) events for the United States Navy E-6B Mercury aircraft fleet. The E-6B is a dual-mission aircraft derived from the commercial Boeing 707 airframe. It is a long-range, narrow-body, four-engine swept-wing jet that hosts a Very Low Frequency (VLF) dual trailing wire antenna system and high-altitude, survivable communications equipment. Operating across a broad frequency spectrum to transmit and receive secure and non-secure voice and data, the E-6B provides survivable, endurable, and reliable airborne command, control, and communications (ABNCP) and Take Charge and Move Out (TACAMO) operations supporting the President of the United States, the Secretary of Defense, and the United States Strategic Command (USSTRATCOM). Due to the strategic importance of the platform, maintenance activities are executed under a DX-A1 national defense priority rating, requiring seamless schedule synchronization, stringent quality controls, and high-fidelity operational turnaround. b. This Market Research tool is being used to identify potential and eligible firms, of all sizes, prior to determining the method of acquisition and issuance of a solicitation. The results of the Sources Sought will be utilized to determine if any Small Business Set-Aside opportunities exist. Additionally, this sources sought is being used to gather constructive information from industry to improve the RFP. c. Attachments: 1. Draft Performance Work Statement (PWS) d. Anticipated period of performance is June 2027 through May 2031. e. Primary Work Location: Refer to the attached Draft PWS. 2.0 DISCLAIMER THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS SOURCES SOUGHT IS STRICTLY VOLUNTARY. 3.0 ANTICIPATED CONTRACT TYPE The Government is anticipating a C-Type, Firm-Fixed Price contract. 4.0 REQUIRED CAPABILITIES Refer to the attached Draft PWS. 5.0 ELIGIBILITY a. The applicable NAICS code for this requirement is 336411 – Aircraft Manufacturing, with a Small Business Size Standard of 1,500 employees. b. The PSC code is J015 – Maintenance, Repair, and Rebuilding of Equipment: Aircraft and Airframe Structural Components. c. Note: FAR 52.219-14 Class Deviation 2021-O0008 Limitation on Subcontracting requires a small business prime on a Set-Aside to perform at least 50% of the cost of contract performance. Small business primes may now count “first tier subcontracted” work performed by similarly situated entities as if it were performed by the prime itself. Please read the full text of the clause deviation (52.219-14 Class Deviation 2021-O0008 dated 09/10/21 at https://www.acquisition.gov/browse/index/far). To assist in our market research and determination of any applicable small business set-aside for this effort, if you are a small business interested in priming this effort and plan to utilize “similarly situated entities” to meet the Limitations on Subcontracting, please identify the name & CAGE Code of the specific firm(s) you intend to partner/subcontract with to meet the requirements as well as their SB size status under the NAICS that you as the prime would assign for their workshare. Information regarding any planned similarly situated entity should be included in answering any questions outlined in the Sources Sought Notice (SSN) in order to assist the Government’s capability determination. d. The Cybersecurity Maturity Model Certification (CMMC) level requirement will be Level 2 Self-Assessment. 6.0 SUBMISSION REQUIREMENTS A: Interested parties are requested to respond to the following sections: Section 1: Corporate Profile and Socioeconomic Status 1. Provide company name, commercial physical address, CAGE code, UEI number, website, and designated Point of Contact (name, phone, email). 2. Identify your company’s business size standard under NAICS 336411 (1,500 employees). 3. State whether your business is classified as an SBA-certified Small Business (SB), Small Disadvantaged Business (SDB), 8(a), Woman-Owned Small Business (WOSB), Economically Disadvantaged WOSB (EDWOSB), HUBZone Small Business, Veteran-Owned Small Business (VOSB), or Service-Disabled Veteran-Owned Small Business (SDVOSB). 4. Under current SBA recertification regulations, do you anticipate your company retaining its small business status over the next 3 to 5 years under NAICS 336411? 5. Small Business Participation: If responding as a Small Business prime: (a) What specific percentage of the total requirement do you plan to perform in-house versus subcontracting? Detail how your organization will comply with the limitation on subcontracting requirements (FAR 52.219-14 / 13 CFR 125.6), ensuring that at least 50% of the cost of contract performance incurred for personnel will be expended by your firm or similarly situated entities. (b) Provide supporting rationale demonstrating that your firm possesses adequate financial resources, capital backing, and operational capacity to perform an effort of this magnitude. Section 2: Facility Capabilities and Geographic Location 6. Do you currently own or lease a fully operational facility located within 25 miles of NAS Jacksonville that satisfies all airfield, runway (>= 8,000 ft x 150 ft; 342,000 lbs gross weight), apron, and hangar constraints? 7. If your current facility does not fully meet these specifications, provide a detailed milestone schedule and capital investment plan illustrating how your company will achieve full compliance within the mandatory 30-calendar-day transition phase-in period. 8. Confirm whether your facility possesses: Enclosed hangar bays capable of housing two (2) Boeing 707/E-6B aircraft concurrently. Full strip, prime, and paint environmental booths sized for E-6B airframes. 20,000 sq ft CLS logistics warehouse space and 20,000 sq ft staging space per aircraft bay. Furnished office suites for 15 Government personnel with NMCI VPN drops and dedicated conference rooms. Approved Liquid Oxygen (LOX) handling/storage, Ethylene Glycol servicing, and battery charging infrastructure. Section 3: Technical Capabilities and Airframe Experience 9. Describe your company's depth of past performance and technical experience performing depot-level modifications, PMI, structural inspection, and strip/paint on Boeing 707, C-135, or E-6B series aircraft (or relevant large commercial/military transport category airframes) within the last five (5) years. 10. Outline your capability to maintain a standing workforce of certified aircraft mechanics, sheet metal technicians, non-destructive inspection (NDI) specialists, avionics technicians, and on-site liaison structural engineers. 11. Describe your experience with U.S. Navy Naval Aviation Maintenance Program (COMNAVAIRFORINST 4790.2E), DCMA 8210.1D, NALCOMIS/OOMA logging, Automated Weight and Balance System (AWBS), and Navy deficiency reporting (JDRS). 12. Detail your processes for executing high-stand fuel leak inspections (95% tank fill), defueling, purging, and gas-free fuel cell maintenance. Section 4: Security, Cybersecurity, and Quality Assurance 13. Confirm that your facility holds a current Defense Counterintelligence and Security Agency (DCSA) verified SECRET Facility Clearance with SECRET safeguarding capabilities. 14. Confirm that your firm can supply 100% sole U.S. citizen personnel (possessing or capable of immediately obtaining SECRET clearances) to support all touch-labor and supervisory roles. 15. State your current Cybersecurity Maturity Model Certification (CMMC) status. Have you achieved a CMMC Level 2 Self-Assessment score posted to SPRS (Supplier Performance Risk System)? 16. Confirm current certification to AS9100 (Revision D) or ISO 9001:2015. Section 5: Transition, Industry Feedback, and Acquisition Strategy 17. Transition Feasibility: Is the required 30-calendar-day Phase-In period realistic and achievable for your organization to reach full operational capability? If not, what transition duration is recommended, and what are the primary critical-path drivers? 18. Turnaround Time (TAT): Based on the scope of E-6B DLMS PMI and concurrent strip/paint, what is your estimated nominal Turnaround Time (calendar days) from aircraft induction to flight acceptance? 19. Government/Contractor Workshare: What risks or efficiencies do you foresee regarding the division of workshare (where the contractor executes PMI baseline inspections/tasks and on-site engineering, while the Government team performs Defect Correction Criteria (DCC) 1–6 unscheduled structural repairs)? B: Submission Instructions: a. Response format: Responses must be submitted in electronic format (Adobe PDF or Microsoft Word compatible). Font size shall not be smaller than 10-point, with standard margins. b. Page Limit: Responses should be concise and are requested not to exceed twenty-five (25) pages, excluding title pages and corporate certifications. Proprietary Data: Proprietary information, if any, must be clearly and distinctly marked on each page. The Government will handle proprietary submissions with appropriate care and safeguards. No classified information shall be submitted in response to this Sources Sought. No phone calls will be accepted. Any information or materials provided in response to this Sources Sought Notice WILL NOT be returned. Classified material SHALL NOT be submitted. The Government is not committed nor obligated to pay for the information provided, and no basis for claims against the Government shall arise as a result of a response to this Sources Sought Notice. c. Submission Deadline: All responses must be received no later than 12 November 2026 at 1400 EST. d. Points of Contact: Submit responses and direct technical/contractual inquiries via email to: Contract Specialist: Courtney Dagenhart, courtney.e.dagenhart.civ@us.navy.mil Procuring Contracting Officer: Beverley Rhamdeow, beverley.s.rhamdeow.civ@us.navy.mil | - | Market Research | 11/12/2026 |
The Commander, Fleet Readiness Center (COMFRC) seeks qualified 8(a) vendors to provide Depot Level Maintenance support at Fleet Readiness Center East (FRCE), Cherry Point, North Carolina, in accordance with the draft Statement of Work. This is a Request for Information (RFI)/Sources Sought only. There is no solicitation available at this time. The RFI is issued for the purpose of conducting Market Research in accorcance with Federal Acquisition Regulation (FAR) part 10. Additionally, the Government is interested in quesitons/comments/feedback on the SOW. The intended contract will be for a one (1) year base period and four (4) Option periods. The submission of information is for planning purposes only and is not to be construed as a commitment by the Governmt to procure any items or services. Draft SOW is attached. The information will not be returned, and no compensation will be provided from any response to this announcement. Proprietary information and trade secrets, if any, must be clearly marked. All information received that is marked Proprietary will be handled accordingly. The applicable North American Industry Classification System (NAICS) code is 336411– Aircraft Manufacturing Interested 8(a) concerns should indicate interest in and capability to provide tasks identified above to the Contract Specialist (email below), in writing as early as possible, but no later than 5:00 PM EST, 10 June 2026 Potential vendors must have an active registration in the System for Award Management (SAM) in order to be eligible for award, as well as have NAICS 336411 identified in their SAM profile. Interested firms are requested to respond to this notice and include the following in their response: Firm’s information to include name of representative, address, phone number CAGE Code, DUNS number; Interest in nature of participation [e.g., prime contractor, teaming partner, primary subcontractor]; Business size [e.g., Small Business, HUBZone, SDVOSB, (Must provide certification of SDVOSB) WOSB ( Must provide Certification of WOSB certification) , SDB, Large Business] General Capability – Only a brief statement of qualifications (not to exceed five (5) pages double sided) is requested at this time. Interested contractors may provide the above information via e-mail to the electronic address listed below. All communications must be addressed to the Contract Specialist via e-mail ONLY. POC Contract Specialist: Jeffrey Smith, jeffrey.t.smith6.civ@us.navy.mil | - | Market Research | 06/10/2026 |
Fleet Readiness Center East (FRCE) invites interested parties to attend an Industry Day and Site Visit in support of an upcoming requirement for Depot Level Maintenance Support. Anticipated Acquisition Strategy: The Government intends to solicit this requirement as a competitive SBA 8(a) Business Development Program Set-Aside. Purpose: This event is designed to provide industry partners with an overview of FRCE’s depot-level maintenance, repair, and overhaul (MRO) requirements, tour primary facilities aboard MCAS Cherry Point and the North Carolina Global TransPark (GTP) in Kinston and foster early industry engagement prior to solicitation release. | - | Special Notice | 11/18/2026 |
The comprehensive cosmetic restoration of a static display MC-130H aircraft at the Hurlburt Field Air Park in Florida, involving extensive corrosion removal, sheet metal repair, complete repainting to its original historical color scheme, and weather-proofing to bring the aircraft to a durable, museum-quality standard in accordance with the attached Statement of Work | - | Combined Synopsis | 02/20/2026 |
***Start of Notice Description 20261109*** To ensure clarity for submission of questions related to the N0001927R1025 solicitation, the Government provides the following update to paragraph three (3) of the 27 October 2026 N0001927R1025 formal Request for Proposal (RFP) posting: Questions related to the solicitation are due not later than midnight (12:00am) 09 November 2026 and shall be submitted using the Excel file titled “Question and Answer Form_Final_RFP_Offeror Name” posted with the solicitation. Questions shall be submitted via email to Contract Specialist Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil) and Mr. David T. Guy (david.t.guy.civ@us.navy.mil) on or before the 09 November 2026 submission date. While submission of questions will be accepted up to midnight (12:00am) 09 November 2026, interested parties are encouraged to submit as early as possible to facilitate timely review and response by the Government. ***End of Notice Description 20261109*** ***Start of Notice Description 20261027*** The Naval Air Systems Command (NAVAIR), on behalf of PMA-271 (Airborne Strategic Command, Control and Communications Program Office), posts formal Request for Proposal (RFP) N0001927R1025 for the E-6B Mercury Depot Maintenance, Repair and Overhaul (MRO) effort. This notice is a follow-on to the E-6B MRO DRAFT Request for Proposal Notice N00019-25-RFPREQ-APM271-0012. NAVAIR intends to award a single source Indefinite Delivery Indefinite Quantity (IDIQ) contract for MRO services for the E-6B aircraft under Federal Acquisition Regulation (FAR) Part 6 full and open competition. This IDIQ is anticipated to include one (1) five-year base ordering period with the option for one (1) additional five-year ordering period from Fiscal Years (FYs) 2027 through 2036. Planned award is during fourth quarter of Government FY 2027. Questions related to the solicitation are due not later than 09 November 2026 and shall be submitted using the Excel file titled “Question and Answer Form_Final_RFP_Offeror Name” posted with the solicitation. Questions shall be submitted via email to Contract Specialist Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil) and Mr. David T. Guy (david.t.guy.civ@us.navy.mil) on or before the 09 November 2026 submission date. Proposals are due not later than the date and time as specified in Block 9 of the SF 33. However, potential Offerors are encouraged to submit portions of their proposal associated with past performance 14 calendar days prior to that submission date. See Section L paragraph 3.1 of the solicitation document for details. Access to Final RFP: The solicitation, including all attachments, is posted in the Solicitation Module of the U.S. Government PIEE website with restricted access and will only be made available to companies incorporated in the United States as verified via SAM.gov. The final RFP and associated attachments may contain Controlled Unclassified Information (CUI) and may contain information whose export is restricted by the Arms Export Control Act (Title 22, U.S.C. Sec 2751, et seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C. App. 2401 et seq.). Request Access Procedures: Accordingly, all requests for access to the final RFP and associated attachments must be in writing and shall include a statement that the company intends to submit as a prime contractor, as well as a certified copy of a DD Form 2345, Military Critical Technical Data Agreement. To obtain certification, contact Defense Logistics Information Service at (800) 352-3572 or https://www.dla.mil/Logistics-Operations/Services/JCP/#jointcertification-program-jcp-office; company name, address, and CAGE code (as it appears in SAM.gov and as registered in the PIEE Solicitation Module). After obtaining a certified DD Form 2345, each potential Offeror shall transmit via email its written request for access to the final RFP and associated attachments, with the certified DD Form 2345 attached to the email to Contract Specialist Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil) and Mr. David T. Guy (david.t.guy.civ@us.navy.mil). Prior to granting access to the final RFP and associated attachments, the Government will verify that the company requesting the data is incorporated within the United States based on CAGE code listing in SAM.gov. Upon review of the potential Offeror’s written request and verification of potential Offeror’s status in SAM.gov, the Government will provide the potential Offeror access to the final RFP and associated attachments in the Solicitation Module of the U.S. Government PIEE website. Companies that had previously requested and been granted access to the DRAFT Request for Proposal under Notice N00019-25-RFPREQ-APM271-0012, have already been provided access in PIEE to the formal RFP under Notice N0001927R1025. The Government may also provide separately, via the dissemination method described below, technical documents to assist potential Offerors with developing their proposals. Access to Other Technical Documents: (Potential Prime Contractor Requests Only) Technical documents have been made available to assist with developing proposals. Some of the technical documents may contain information whose export is restricted by the Arms Export Control Act (Title 22, U.S.C. Sec 2751, et seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C. App. 2401 et seq.). Accordingly, all requests for access to technical documents must follow the “Request Access Procedures” described above. Upon review of the potential Offeror’s written request and approved DD Form 2345, the Government will provide the potential Offeror access to the technical documents via the DoD SAFE website (previously AMRDEC) - https://safe.apps.mil/. The data custodian listed in Block 3 of DD Form 2345 will receive a link, via e-mail, to the package download page as well as a password. The password is unique for each recipient and will be disabled once SAFE detects that the user successfully downloaded each file within the package. CUI Disclaimer: Distribution of CUI by a potential Offeror to that potential Offerors team members, partners, subcontractors, suppliers and/or vendors shall be the responsibility of the potential Offeror and shall be limited to a need-to-know basis. All guidance contained herein with regard to handling, distribution and destruction of CUI data shall be flowed down to all subcontractors and team members. Those who access or take receipt of any technical data shall comply with all laws, export controls and distribution statements associated with the document. ***End of Notice Description 20261027*** | - | Solicitation | 12/11/2026 |
Additional Details
Solicitation Number
N6852023R0031
Archive Date
Dec 2, 2023
Office Address
PATUXENT RIVER, MD, 20670-5000