GovChime
Notice ID: 96e93c89f3874db086ea94b089709d9cAward NoticeAwarded

Pacific Target Marine Operations Maintenance, Operation, and Depot Support for Aerial and Seaborne Assets

Awarded on February 5, 2024. Full description on SAM.gov.

Awarded tounder N6893624C0006 (source: SAM.gov award notice)• $170.5M

Overview

Posted
February 6, 2024
Notice type
Award Notice
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
336411: Aircraft Manufacturing
Agency
Department of WarDepartment of the Navy

Notice details

Office
NAVAL AIR WARFARE CENTER
Place of performance
CA-12
Last updated
Dec 4, 2025
Award date
Feb 5, 2024
Award amount (SAM.gov award notice)
$170.5M

Identifiers

Solicitation number
N6893622R0031
Notice ID
96e93c89f3874db086ea94b089709d9c
Award number (PIID)
N6893624C0006

Description

The Naval Air Warfare Center Weapons Division (NAWCWD) Point Mugu, Pacific Target and Marine Operations Division, as part of the Threat/Target Systems Department, has the requirement to maintain, operate, and provide depot support for aerial and seaborne assets. This includes air and sea vehicles as well as vessels used for manned and unmanned training and test events. Aerial assets include subsonic and supersonic aerial targets. Seaborne assets include a combination of target and training support vessels. The contractor performs operational and intermediate level maintenance for both aerial and seaborne assets. This contract contains Cost-Plus Fixed-Fee for labor and Cost Line Items for Other Direct Cost and Travel DESCRIPTION: The purpose of this synopsis is to notify the industry that an award has been made. PROCUREMENT TYPE: The Government awarded a Cost Plus Fixed-Fee (CPFF) and Cost type contract for a base period of 6 months, four one-year option periods, and another option period of 6 months (all periods totaling 5 years). The solicitation was competed via a small business set aside. The award was made to: Systems Application & Technologies, Inc. (SA-Tech)* 1000 Town Center Drive, Suite 110 Oxnard, California 93036-2647 *Contractors must be certified through Defense Logistics Information Services (DLIS) in order to access Controlled Unclassified Information (CUI) or Export Controlled Information. Access to CUI is limited, to a single point of contact (POC) per CAGE code, who is listed as the Data Custodian on the DD 2345 and approved by Defense Logistics Agency (DLA). The DD 2345 must be approved prior to requesting access to CUI in SAM.gov. Contractors are responsible for coordinating with their CAGE codes Data Custodian POC to request access to CUI. For additional information, visit the DLA website for the Joint Certification Program: https://www.dla.mil/HQ/LogisticsOperations/Services/JCP/.

Full description on SAM.gov

Award Overview

Award Number

N6893624C0006

Award Amount (SAM.gov award notice)

$170.5M

Award Date

Feb 5, 2024

Awardee

Awardee UEI

LZYJNMY31GY8

Awardee CAGE Code

099A6

Original Solicitation

Notice ID: 96e93c89f3874db086ea94b089709d9c

Posted Date: Feb 6, 2024

Original Response Deadline: Not specified

Contacts

Documents

No documents available.

Lifecycle

Solicitation:N6893622R0031
  1. Market Research
  2. Pre-Solicitation
  3. Solicitation
  4. Awarded

This opportunity has been awarded.

  1. 5×
    Market ResearchMay 25, 2022

    Pacific Target Marine Operations Maintenance, Operation, and Depot Support for Aerial and Seaborne Assets

    Notice a411a38652014bd788ed0d4e6a7b833c on SAM.gov

  2. Pre-SolicitationMar 24, 2023

    Pacific Target Marine Operations Maintenance, Operation, and Depot Support for Aerial and Seaborne Assets

    Notice 06debdf51fe4404c830bf4c876fb3406 on SAM.gov

  3. 12×
    SolicitationApr 13, 2023

    Pacific Target and Marine Operations Division - Target Operations and Maintenance

    Notice 225129c8ed9a4eac84dda6959847723c on SAM.gov

  4. AwardedCurrentFeb 6, 2024

    Pacific Target Marine Operations Maintenance, Operation, and Depot Support for Aerial and Seaborne Assets

    Notice 96e93c89f3874db086ea94b089709d9c on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
The Commander, Fleet Readiness Center (COMFRC) seeks qualified 8(a) vendors to provide Depot Level Maintenance support at Fleet Readiness Center East (FRCE), Cherry Point, North Carolina, in accordance with the draft Statement of Work. This is a Request for Information (RFI)/Sources Sought only. There is no solicitation available at this time. The RFI is issued for the purpose of conducting Market Research in accorcance with Federal Acquisition Regulation (FAR) part 10. Additionally, the Government is interested in quesitons/comments/feedback on the SOW. The intended contract will be for a one (1) year base period and four (4) Option periods. The submission of information is for planning purposes only and is not to be construed as a commitment by the Governmt to procure any items or services. Draft SOW is attached. The information will not be returned, and no compensation will be provided from any response to this announcement. Proprietary information and trade secrets, if any, must be clearly marked. All information received that is marked Proprietary will be handled accordingly. The applicable North American Industry Classification System (NAICS) code is 336411– Aircraft Manufacturing Interested 8(a) concerns should indicate interest in and capability to provide tasks identified above to the Contract Specialist (email below), in writing as early as possible, but no later than 5:00 PM EST, 10 June 2026 Potential vendors must have an active registration in the System for Award Management (SAM) in order to be eligible for award, as well as have NAICS 336411 identified in their SAM profile. Interested firms are requested to respond to this notice and include the following in their response: Firm’s information to include name of representative, address, phone number CAGE Code, DUNS number; Interest in nature of participation [e.g., prime contractor, teaming partner, primary subcontractor]; Business size [e.g., Small Business, HUBZone, SDVOSB, (Must provide certification of SDVOSB) WOSB ( Must provide Certification of WOSB certification) , SDB, Large Business] General Capability – Only a brief statement of qualifications (not to exceed five (5) pages double sided) is requested at this time. Interested contractors may provide the above information via e-mail to the electronic address listed below. All communications must be addressed to the Contract Specialist via e-mail ONLY. POC Contract Specialist: Jeffrey Smith, jeffrey.t.smith6.civ@us.navy.mil
79%
Market Research06/10/2026
Fleet Readiness Center East (FRCE) invites interested parties to attend an Industry Day and Site Visit in support of an upcoming requirement for Depot Level Maintenance Support. Anticipated Acquisition Strategy: The Government intends to solicit this requirement as a competitive SBA 8(a) Business Development Program Set-Aside. Purpose: This event is designed to provide industry partners with an overview of FRCE’s depot-level maintenance, repair, and overhaul (MRO) requirements, tour primary facilities aboard MCAS Cherry Point and the North Carolina Global TransPark (GTP) in Kinston and foster early industry engagement prior to solicitation release.
76%
Special Notice11/18/2026
***Start of Notice Description 20261112*** The purpose of this notice is to advise interested parties that an updated solicitation file for Solicitation N0001927R1025 has been uploaded to the Solicitation Module of the Procurement Integrated Enterprise Environment (PIEE) website under the title E_6B_MRO_Solicitation_Rev_1__N0001927R1025 to support proposal development. This update incorporates required Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) provisions and clauses pertinent to this acquisition. Incorporated / Updated FAR and DFARS Clauses: FAR 52.226-7 Drug-Free Workplace, dated May 2024 FAR 52.232-16 Progress Payments (Deviation 2026-O0038), dated Feb 2026 FAR 52.233-1 Disputes (Deviation 2026-O0038) (Alternate I), dated Feb 2026 FAR 52.240-92 Security Requirements (Deviation 2026-O0038), dated Feb 2026 FAR 52.203-11 Certification and Disclosure Regarding Payments to Influence Certain Federal Transactions, dated Sep 2024 FAR 52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements-Representation, dated Jan 2017 FAR 52.215-1 Instructions to Offerors-Competitive Acquisition (Deviation 2026-O0038) (Alternate I), dated Feb 2026 DFARS 252.226-7003 Drug-Free Work Force, dated Aug 2024 DFARS 252.247-7016 Contractor Liability for Loss or Damage, dated Dec 1991 DFARS 252.225-7000 Buy American-Balance of Payments Program Certificate, dated Feb 2024 DFARS 252.215-7012 Requirements for Submission of Proposals via Electronic Media, dated Jan 2018 (Note: All incorporated provisions and clauses are set forth in full text or incorporated by reference within the updated solicitation documentation available in PIEE.) ***End of Notice Description 20261112*** ***Start of Notice Description 20261109*** To ensure clarity for submission of questions related to the N0001927R1025 solicitation, the Government provides the following update to paragraph three (3) of the 27 October 2026 N0001927R1025 formal Request for Proposal (RFP) posting: Questions related to the solicitation are due not later than midnight (12:00am) 09 November 2026 and shall be submitted using the Excel file titled “Question and Answer Form_Final_RFP_Offeror Name” posted with the solicitation. Questions shall be submitted via email to Contract Specialist Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil) and Mr. David T. Guy (david.t.guy.civ@us.navy.mil) on or before the 09 November 2026 submission date. While submission of questions will be accepted up to midnight (12:00am) 09 November 2026, interested parties are encouraged to submit as early as possible to facilitate timely review and response by the Government. ***End of Notice Description 20261109*** ***Start of Notice Description 20261027*** The Naval Air Systems Command (NAVAIR), on behalf of PMA-271 (Airborne Strategic Command, Control and Communications Program Office), posts formal Request for Proposal (RFP) N0001927R1025 for the E-6B Mercury Depot Maintenance, Repair and Overhaul (MRO) effort. This notice is a follow-on to the E-6B MRO DRAFT Request for Proposal Notice N00019-25-RFPREQ-APM271-0012. NAVAIR intends to award a single source Indefinite Delivery Indefinite Quantity (IDIQ) contract for MRO services for the E-6B aircraft under Federal Acquisition Regulation (FAR) Part 6 full and open competition. This IDIQ is anticipated to include one (1) five-year base ordering period with the option for one (1) additional five-year ordering period from Fiscal Years (FYs) 2027 through 2036. Planned award is during fourth quarter of Government FY 2027. Questions related to the solicitation are due not later than 09 November 2026 and shall be submitted using the Excel file titled “Question and Answer Form_Final_RFP_Offeror Name” posted with the solicitation. Questions shall be submitted via email to Contract Specialist Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil) and Mr. David T. Guy (david.t.guy.civ@us.navy.mil) on or before the 09 November 2026 submission date. Proposals are due not later than the date and time as specified in Block 9 of the SF 33. However, potential Offerors are encouraged to submit portions of their proposal associated with past performance 14 calendar days prior to that submission date. See Section L paragraph 3.1 of the solicitation document for details. Access to Final RFP: The solicitation, including all attachments, is posted in the Solicitation Module of the U.S. Government PIEE website with restricted access and will only be made available to companies incorporated in the United States as verified via SAM.gov. The final RFP and associated attachments may contain Controlled Unclassified Information (CUI) and may contain information whose export is restricted by the Arms Export Control Act (Title 22, U.S.C. Sec 2751, et seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C. App. 2401 et seq.). Request Access Procedures: Accordingly, all requests for access to the final RFP and associated attachments must be in writing and shall include a statement that the company intends to submit as a prime contractor, as well as a certified copy of a DD Form 2345, Military Critical Technical Data Agreement. To obtain certification, contact Defense Logistics Information Service at (800) 352-3572 or https://www.dla.mil/Logistics-Operations/Services/JCP/#jointcertification-program-jcp-office; company name, address, and CAGE code (as it appears in SAM.gov and as registered in the PIEE Solicitation Module). After obtaining a certified DD Form 2345, each potential Offeror shall transmit via email its written request for access to the final RFP and associated attachments, with the certified DD Form 2345 attached to the email to Contract Specialist Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil) and Mr. David T. Guy (david.t.guy.civ@us.navy.mil). Prior to granting access to the final RFP and associated attachments, the Government will verify that the company requesting the data is incorporated within the United States based on CAGE code listing in SAM.gov. Upon review of the potential Offeror’s written request and verification of potential Offeror’s status in SAM.gov, the Government will provide the potential Offeror access to the final RFP and associated attachments in the Solicitation Module of the U.S. Government PIEE website. Companies that had previously requested and been granted access to the DRAFT Request for Proposal under Notice N00019-25-RFPREQ-APM271-0012, have already been provided access in PIEE to the formal RFP under Notice N0001927R1025. The Government may also provide separately, via the dissemination method described below, technical documents to assist potential Offerors with developing their proposals. Access to Other Technical Documents: (Potential Prime Contractor Requests Only) Technical documents have been made available to assist with developing proposals. Some of the technical documents may contain information whose export is restricted by the Arms Export Control Act (Title 22, U.S.C. Sec 2751, et seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C. App. 2401 et seq.). Accordingly, all requests for access to technical documents must follow the “Request Access Procedures” described above. Upon review of the potential Offeror’s written request and approved DD Form 2345, the Government will provide the potential Offeror access to the technical documents via the DoD SAFE website (previously AMRDEC) - https://safe.apps.mil/. The data custodian listed in Block 3 of DD Form 2345 will receive a link, via e-mail, to the package download page as well as a password. The password is unique for each recipient and will be disabled once SAFE detects that the user successfully downloaded each file within the package. CUI Disclaimer: Distribution of CUI by a potential Offeror to that potential Offerors team members, partners, subcontractors, suppliers and/or vendors shall be the responsibility of the potential Offeror and shall be limited to a need-to-know basis. All guidance contained herein with regard to handling, distribution and destruction of CUI data shall be flowed down to all subcontractors and team members. Those who access or take receipt of any technical data shall comply with all laws, export controls and distribution statements associated with the document. ***End of Notice Description 20261027***
75%
Solicitation12/11/2026
***UPDATE 3/30/2026 The solicitation N6852025R0046 was updated in PIEE to remove the requirement to submit the Material Safety Data Sheet (MSDS). There was a check box in PIEE that needed to be unchecked to allow submittal. This Amendment 4 and the prior Amendment are only a NOTICE. The latest Amendment 0002 is still the most current Amendment and the Government does not anticipate an additional Amendment. **** Amendment 3- removed A Material Safety Data Sheet (MSDS) must be attached to offer submissions in accordance with FAR Clause 52.223-3 submission requirement The Contractor shall augment uniform Marine Corps personnel by performing aircraft maintenance functions. Aircraft maintenance functions for this Task Order (TO) are identified and defined as Line, Corrosion Control, Tool Room, Non-Destructive Inspection (NDI) and aircraft scheduled and unscheduled Organizational Level (O-Level) Maintenance support. The Government will compete this requirement via the KRACEn MAC and only existing KRACEn MAC awardees are eligible to submit offers in response to this solicitation. Amendment 1 posted to extend due date to 24 March 2026 and to provide answers to questions. Another amendment is forthcoming. 3/19/2026 Amendment 2 posted extending the due date to 31 March 2026 and providing revised attachments.
72%
Solicitation03/31/2026
***Start of Notice Update 20261020 The purpose of this update is to provide Government responses to follow-up industry questions provided via e-mail 14 October 2026. The following document is posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website: E-6B MRO Pre-Solicitation Q&A Posting Rev 3. ***End of Notice Update 20261020*** ***Start of Notice Update 20260917*** The purpose of this update is to provide Government responses to follow-up industry questions provided as a part of the E-6B MRO Pre-Solicitation Conference One-on-One meetings held 29 July 2026. The following document is posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website: E-6B MRO Pre-Solicitation Q&A Posting Rev 2. This notice also updates to the E-6B Maintenance, Repair and Overhaul (MRO) Pre-solicitation Notice N00019-25-RFPREQ-APM271-0012 posted on 29 July 2026. Naval Air Systems Command (NAVAIR) intends to solicit for a single award Indefinite Delivery Indefinite Quantity (IDIQ) Contract for EPMH Overhaul and Repair services for the E-6B aircraft under Federal Acquisition Regulation (FAR) Part 6 full and open competition. The IDIQ is anticipated to include one (1) five-year ordering period with the option for one (1) additional five-year ordering period from Fiscal Year (FYs) 2027 through 2036. The scope of effort under this IDIQ contract will include performing scheduled and unscheduled depot tasks, within-scope repairs, in-service repairs, light planeside manufacturing and fabrication, and modification to airframe structures and aircraft systems per NAVAIR issued E-6B Technical Directives and E-6B depot technical manuals. To the largest degree possible, the Bill of Material parts to support the effort herein will be supplied by the E-6B Contractor Logistics Support (CLS) provider from stock that is owned by the E-6B program. Fulfillment of these requirements will take place primarily at the contractor's facility, but may also be at Tinker AFB, OK and/or other locations as required when directed by the Government. The contractor’s facility where the MRO services will be performed within continental North America. Interested parties must be registered under the North American Industry Classification System (NAICS) code in the System for Award Management (SAM.gov). The draft solicitation is anticipated to be available for comment on or around the end of July 2026. The final solicitation, and all attachments necessary to prepare a proposal are anticipated to be available on or about first quarter FY 2027, with a tentative closing date 45 days after final solicitation posting. It is the responsibility of the potential vendors to monitor SAM.gov for any information that may pertain to a future solicitation. In response to a question raised during the Pre-Solicitation Conference One-on-One meetings held on 29 July 2026, if interested parties desire access to E-6B MRO Interactive Electronic Technical Manuals, in advance of the Final Solicitation release, to support proposal development a written request for access shall be submitted to Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil), Mr. Travis Guy (david.t.guy.civ@us.navy.mil), and Ms. Lisa Troccoli (lisa.j.troccoli.civ@us.navy.mil) by 06 August 2026. Disclaimer: This pre-solicitation notice is for information only and shall not be construed as a commitment by the Government to solicit contractual offers or award contracts. The Government is not soliciting, nor will it accept proposals as a result of this pre-solicitation notice. The Government will not reimburse the cost of any submission in response to this announcement -- the entire cost of any submission will be at the sole expense of the source submitting the information. If a solicitation is issued in the future, it will be announced via SAM.gov and interested parties must comply with that announcement. The Government will not reimburse respondents for any questions submitted or information provided as a result of this notice. ***End of Notice Update 20260917*** ***Start of Notice Update 20260821*** The purpose of this update is to provide Government responses to follow-up industry questions provided as a part of the E-6B MRO Pre-Solicitation Conference One-on-One meetings held 29 July 2026. The following document is posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website: E-6B MRO Pre-Solicitation Q&A Posting Rev 1. ***End of Notice Update 20260821*** ***Start of Notice Update 20260730*** The purpose of this update is to provide Government responses to industry questions discussed during the E-6B MRO Pre-Solicitation Conference One-on-One meetings held 29 July 2026. The following document is posted in the Solicitation Module of the U.S. Government Procurement Integrated Enterprise Environment (PIEE) website: E-6B MRO Pre-Solicitation Q&A Posting. ***End of Notice Update 20260730*** ***Start of Notice Update 20260729*** This notice is an update to the E-6B Maintenance, Repair and Overhaul (MRO) Pre-solicitation Notice N00019-25-RFPREQ-APM271-0012 posted on 09 April 2026. Naval Air Systems Command (NAVAIR) intends to solicit for a single award Indefinite Delivery Indefinite Quantity (IDIQ) Contract for EPMH Overhaul and Repair services for the E-6B aircraft under Federal Acquisition Regulation (FAR) Part 6 full and open competition. The IDIQ is anticipated to include one (1) five-year ordering period with the option for one (1) additional five-year ordering period from Fiscal Year (FYs) 2027 through 2036. The scope of effort under this IDIQ contract will include performing scheduled and unscheduled depot tasks, within-scope repairs, in-service repairs, light planeside manufacturing and fabrication, and modification to airframe structures and aircraft systems per NAVAIR issued E-6B Technical Directives and E-6B depot technical manuals. To the largest degree possible, the Bill of Material parts to support the effort herein will be supplied by the E-6B Contractor Logistics Support (CLS) provider from stock that is owned by the E-6B program. Fulfillment of these requirements will take place primarily at the contractor's facility, but may also be at Tinker AFB, OK and/or other locations as required when directed by the Government. The contractor’s facility where the MRO services will be performed within continental North America. Interested parties must be registered under the North American Industry Classification System (NAICS) code in the System for Award Management (SAM.gov). The draft solicitation is anticipated to be available for comment on or around the end of July 2026. The final solicitation, and all attachments necessary to prepare a proposal are anticipated to be available on or about late fourth quarter FY 2026, with a tentative closing date 45 days after final solicitation posting. It is the responsibility of the potential vendors to monitor SAM.gov for any information that may pertain to a future solicitation. In response to a question raised during the Pre-Solicitation Conference One-on-One meetings held on 29 July 2026, if interested parties desire access to E-6B MRO Interactive Electronic Technical Manuals, in advance of the Final Solicitation release, to support proposal development a written request for access shall be submitted to Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil), Mr. Travis Guy (david.t.guy.civ@us.navy.mil), and Ms. Lisa Troccoli (lisa.j.troccoli.civ@us.navy.mil) by 06 August 2026. Disclaimer: This pre-solicitation notice is for information only and shall not be construed as a commitment by the Government to solicit contractual offers or award contracts. The Government is not soliciting, nor will it accept proposals as a result of this pre-solicitation notice. The Government will not reimburse the cost of any submission in response to this announcement -- the entire cost of any submission will be at the sole expense of the source submitting the information. If a solicitation is issued in the future, it will be announced via SAM.gov and interested parties must comply with that announcement. The Government will not reimburse respondents for any questions submitted or information provided as a result of this notice. ***End of Notice Update 20260729*** ***Start of Notice Description 20260709*** NOTE - The Solicitation number for the E-6B Maintenance, Repair and Overhaul (MRO) effort has been updated to N0001926R1039. The Naval Air Systems Command (NAVAIR), on behalf of PMA-271 (Airborne Strategic Command, Control and Communications Program Office), posts a DRAFT Request for Proposal (RFP) for the PMA-271 E-6B Mercury Depot MRO effort. This notice is a follow-on to the E-6B MRO Presolicitation Notice N00019-25-RFPREQ-APM271-0012 posted on 09 April 2026. NAVAIR intends to solicit for a single award Indefinite Delivery Indefinite Quantity (IDIQ) Contract for MRO services for the E-6B aircraft under Federal Acquisition Regulation (FAR) Part 6 full and open competition. The IDIQ is anticipated to include one (1) five-year ordering period with the option for one (1) additional five-year ordering period from Fiscal Year (FYs) 2027 through 2036. The scope of work under this IDIQ contract will include performing scheduled and unscheduled depot maintenance tasks and repairs in accordance with the Planned Maintenance Interval Specification, aircraft modifications via technical directives and engineering change proposals, and material fabrication. This effort will also include aircraft inductions for standalone drop-in modifications and repairs and a Contractor Field Team to support modifications and repairs offsite. Anticipated award is third quarter of Government Fiscal Year (FY) 2027. The 24 July 2026 response date identified in this posting is the response date for receiving Industry comments and questions associated with the DRAFT RFP. The DRAFT RFP, including all attachments, will be posted in the Solicitation Module of the U.S. Government PIEE website with restricted access and will only be made available to companies incorporated in the United States as verified via SAM.gov. The intent of this posting is to solicit feedback from Industry on the DRAFT RFP and associated attachments prior to issuing the final RFP. Please submit questions using the file named “Draft RFP Question and Answer form_Offeror Name.xlsx” and replace Offeror Name with your Company name. This file is posted in the Solicitation Module of the U.S. Government PIEE and will be accessible with the DRAFT RFP and associated attachments after Offerors are granted access following the procedures set forth under “Access to documents”. Please submit questions not later than 24 July 2026. Any proprietary information provided in the questions or comments shall be marked or annotated accordingly. Classified material SHALL NOT be submitted. Access to documents – The DRAFT RFP and associated attachments may contain Controlled Unclassified Information (CUI) and may contain information whose export is restricted by the Arms Export Control Act (Title 22, U.S.C. Sec 2751, et seq.) or the Export Administration Act of 1979, as amended (Title 50, U.S.C. App. 2401 et seq.). Accordingly, all requests for access to the DRAFT RFP and associated attachments must be in writing and shall include a statement that the company intends to submit as a prime contractor, company name, address, and Commercial and Government Entity (CAGE) Code (as it appears in SAM.gov and as registered in the PIEE Solicitation Module), as well as a certified copy of a DD Form 2345, Military Critical Technical Data Agreement. To obtain certification, contact Defense Logistics Information Service at (800) 352-3572 or https://www.dla.mil/Logistics-Operations/Services/JCP/#jointcertification-program-jcp-office; company name, address, and CAGE code (as it appears in SAM.gov and as registered in the PIEE Solicitation Module). After obtaining a certified DD Form 2345, each potential Offeror shall transmit via email its written request for access to the DRAFT RFP and associated attachments, with the certified DD Form 2345 attached to the email to Contract Specialists Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil) and Mr. David T. Guy (david.t.guy.civ@us.navy.mil). Prior to granting access to the DRAFT RFP and associated attachments, the Government will verify that the company requesting the data is incorporated within the United States based on CAGE code listing in SAM.gov. Upon review of the potential Offeror’s written request and verification of potential Offeror’s status in SAM.gov, the Government will provide the potential Offeror access to the DRAFT RFP and associated attachments in the Solicitation Module of the U.S. Government PIEE website. Distribution of CUI by a potential Offeror to that potential Offeror’s team members, partners, subcontractors, suppliers and/or vendors shall be the responsibility of the potential Offeror and shall be limited to a “need to know” basis. All guidance contained herein with regard to handling, distribution and destruction of CUI data shall be flowed down to all subcontractors and team members. Those who access or take receipt of any technical data shall comply with all laws, export controls, and distribution statements associated with the document. *************************************************************************************************** Additionally, NAVAIR is providing an opportunity for vendors to attend a Virtual Pre-Solicitation Conference and virtual One-on-One meetings to discuss the DRAFT RFP and associated attachments on 29 July 2026 and 30 July 2026, beginning at 08:00:00 AM (Eastern Time) and ending at 15:00:00 PM (Eastern Time) via Microsoft Teams. The Virtual Pre-Solicitation Conference and One-on-One Meetings will be held at the unclassified level. To attend either or both meetings, register via email to Contract Specialists Mr. Timothy C. Ayers (timothy.c.ayers.civ@us.navy.mil) and Mr. David T. Guy (David.t.guy.civ@us.navy.mil) by 24 July 2026 at 05:00:00 PM (Eastern Time). Pre-Solicitation Conference is open to all interested parties (potential Offerors and Subcontractors) One-on-One Meetings are open only to potential Prime Offerors Registration for either meeting must be completed in advance and is required for participation. Registration must include a list of attendees (name, title, phone number, and email). Exceptions will not be made for late registration. Changes to the registration information (cancellation or substitution) can be made up until 12:00:00 PM (Eastern Time) on 27 July 2026. Registration requests received after the deadline will not be accepted. Registered companies will be notified via email on or about 27 July 2026 with the time and information on how to join each session. Participation in the virtual meetings is neither mandatory nor is it a prerequisite to future participation by a potential Offeror in any potential future solicitations/contracts. DISCLAIMER PURSUANT TO FEDERAL ACQUISITION REGULATION (FAR) 15.101(b), THIS NOTICE IS BEING ISSUED FOR A DRAFT RFP. THE DRAFT RFP IS SOLELY FOR INFORMATION AND PLANNING PURPOSES. IT DOES NOT CONSTITUTE AN RFP OR A PROMISE TO ISSUE AN RFP IN THE FUTURE. THE DRAFT RFP DOES NOT COMMIT THE GOVERNMENT TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. THE FINAL REQUIREMENT WILL BE DEFINED UNDER A FORMAL RFP. FURTHER, THE NAVY IS NOT AT THIS TIME SEEKING PROPOSALS AND WILL NOT ACCEPT UNSOLICITED PROPOSALS. RESPONDENTS ARE ADVISED THAT THE GOVERNMENT WILL NOT PAY FOR ANY INFORMATION OR ADMINISTRATIVE COSTS INCURRED IN RESPONSE TO THIS PRESOLICITATION NOTICE. ALL COSTS ASSOCIATED WITH RESPONDING TO THIS ANNOUNCEMENT WILL BE SOLELY AT THE EXPENSE OF THE INTERESTED PARTY. IT IS THE RESPONSIBILITY OF THE POTENTIAL OFFERORS TO MONITOR THIS WEBSITE FOR ADDITIONAL INFORMATION PERTAINING TO THIS REQUIREMENT. ***End of Notice Description 20260709*** ***Start Presolicitation Update 20260409*** This notice is an update to the E-6B Maintenance, Repair and Overhaul (MRO) Presolicitation Notice N00019-25-RFPREQ-APM271-0012 posted on 14 January 2026. Naval Air Systems Command (NAVAIR) intends to solicit for a single award Indefinite Delivery Indefinite Quantity (IDIQ) Contract for EPMH Overhaul and Repair services for the E-6B aircraft under Federal Acquisition Regulation (FAR) Part 6 full and open competition. The IDIQ is anticipated to include one (1) five-year ordering period with the option for one (1) additional five-year ordering period from Fiscal Year (FYs) 2027 through 2036. The scope of effort under this IDIQ contract will include performing scheduled and unscheduled depot tasks, within-scope repairs, in-service repairs, light planeside manufacturing and fabrication, and modification to airframe structures and aircraft systems per NAVAIR issued E-6B Technical Directives and E-6B depot technical manuals. To the largest degree possible, the Bill of Material parts to support the effort herein will be supplied by the E-6B Contractor Logistics Support (CLS) provider from stock that is owned by the E-6B program. Fulfillment of these requirements will take place primarily at the contractor's facility, but may also be at Tinker AFB, OK and/or other locations as required when directed by the Government. The contractor’s facility where the MRO services will be performed within continental North America. Interested parties must be registered under the North American Industry Classification System (NAICS) code in the System for Award Management (SAM.gov). The draft solicitation is anticipated to be available for comment on or around the end of May 2026. The final solicitation, and all attachments necessary to prepare a proposal are anticipated to be available on or about mid fourth quarter 2026, with a tentative closing date 30 days after final solicitation posting. It is the responsibility of the potential vendors to monitor SAM.gov for any information that may pertain to a future solicitation. Disclaimer: This pre-solicitation notice is for information only and shall not be construed as a commitment by the Government to solicit contractual offers or award contracts. The Government is not soliciting, nor will it accept proposals as a result of this pre-solcitation notice. The Government will not reimburse the cost of any submission in response to this announcement -- the entire cost of any submission will be at the sole expense of the source submitting the information. If a solicitation is issued in the future, it will be announced via SAM.gov and interested parties must comply with that announcement. The Government will not reimburse respondents for any questions submitted or information provided as a result of this notice. ***End Presolicitation Update 20260409*** This notice is an update to the E-6B Enhanced Phased Maintenance-Heavy (EPMH) Overhaul and Repair Sources Sought Notice N00019-25-RFPREQ-APM271-0012 posted on 30 May 2024, and the Special Notice of questions for interested party response posted on 11 August 2025. Naval Air Systems Command (NAVAIR) intends to solicit for a single award Indefinite Delivery Indefinite Quantity (IDIQ) Contract for EPMH Overhaul and Repair services for the E-6B aircraft under Federal Acquisition Regulation (FAR) Part 6 full and open competition. The IDIQ is anticipated to include one (1) five-year ordering period with the option for one (1) additional five-year ordering period from Fiscal Year (FYs) 2027 through 2036. The scope of effort under this IDIQ contract will include performing scheduled and unscheduled depot tasks, within-scope repairs, in-service repairs, light planeside manufacturing and fabrication, and modification to airframe structures and aircraft systems per NAVAIR issued E-6B Technical Directives and E-6B depot technical manuals. To the largest degree possible, the Bill of Material parts to support the effort herein will be supplied by the E-6B Contractor Logistics Support (CLS) provider from stock that is owned by the E-6B program. Fulfillment of these requirements will take place primarily at the contractor's facility, but may also be at Tinker AFB, OK and/or other locations as required when directed by the Government. The contractor’s facility where the MRO services will be performed within continental North America. Interested parties must be registered under the North American Industry Classification System (NAICS) code in the System for Award Management (SAM.gov). The draft solicitation is anticipated to be available for comment on or around 24 April 2026. The final solicitation, and all attachments necessary to prepare a proposal are anticipated to be available on or about 24 June 2026, with a tentative closing date of 08 August 2026. It is the responsibility of the potential vendors to monitor SAM.gov for any information that may pertain to a future solicitation. Disclaimer: This pre-solicitation notice is for information only and shall not be construed as a commitment by the Government to solicit contractual offers or award contracts. The Government is not soliciting, nor will it accept proposals as a result of this pre-solcitation notice. The Government will not reimburse the cost of any submission in response to this announcement -- the entire cost of any submission will be at the sole expense of the source submitting the information. If a solicitation is issued in the future, it will be announced via SAM.gov and interested parties must comply with that announcement. The Government will not reimburse respondents for any questions submitted or information provided as a result of this notice.
71%
Pre-Solicitation11/30/2026

Additional Details

Solicitation Number

N6893622R0031

Archive Date

Feb 4, 2025

Office Address

CHINA LAKE, CA, 93555-6018