GovChime
Notice ID: c57413b222b4c4e0da65255738f4caeeSpecial Notice

66--Purchase SENSYS Magnetic Cart Accessories for NPS, MWR, MW Archeological Ctr

Archived on January 1, 2022. Full description on SAM.gov.

Overview

Posted
August 14, 2017
Notice type
Special Notice
NAICS
334511: Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing
Agency
Department of the InteriorNATIONAL PARK SERVICE

Notice details

Office
DSC CONTRACTING SERVICES DIVISION
PSC
66: INSTRUMENTS AND LABORATORY EQPT
Last updated
Dec 5, 2025

Identifiers

Solicitation number
P17PS02464
Notice ID
c57413b222b4c4e0da65255738f4caee

Description

This announcement constitutes the only notice for Original Equipment Manufacturer Sensorik & Systemtechnologie GmbH, SENSYS Magnetic Cart Accessories. This is not a request for quotes. A determination not to compete is solely within the discretion of the Government. Any response to this notice must show clear and convincing evidence that competition would be advantageous to the Government. Responses must be received no later than 11:00 EST August 20, 2017 by sending an email to Adam_Kircher@nps.gov: however, any technical data received will be for the sole purpose of market research for future requirements. Under Simplified Acquisition Procedures (SAP), National Park Service, Midwest Region, Major Acquisitions Buying Office intends to issue a sole source, firm-fixed price contract to: COMPANY: Archaeo-Physics, LLC.; 3601 SW River Parkway Unit 215; Portland, OR 97239, ON OR AFTER: August 20, 2017 NAICS: 334511 Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing. AUTHORITY: 13.106(b) Soliciting from a single source.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Kircher, Adam

Documents

No documents available.

Lifecycle

Solicitation:P17PS02464
  1. Special NoticeCurrentAug 14, 2017

    66--Purchase SENSYS Magnetic Cart Accessories for NPS, MWR, MW Archeological Ctr

    Notice c57413b222b4c4e0da65255738f4caee on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Northern California Area Office (NCAO) Shasta Power Plant (SH-PP) Condense Mode Parts
-Combined Synopsis11/24/2026
Small-Diameter Soil Cyclic Triaxial Testing System THIS IS NOT A SOLICITATION FOR PROPOSALS THIS IS A SOURCES SOUGHT SYNOPSIS ONLY This Sources Sought is for the purpose of identifying firms that can meet the following Bureau of Reclamation Requirements. The Bureau of Reclamation (BOR) has a requirement for Small-Diameter Soil Cyclic Triaxial Testing System, under NAICS 334519 - Other Measuring and Controlling Device Manufacturing. GOVERNMENT DISCLAIMER This notice is issued solely for market research and planning purposes. It is not a solicitation and does not obligate the Government to issue a solicitation or award a contract. The Government will not pay for information submitted in response. Responses may be used to assess commercial availability, technical feasibility, potential sources, socioeconomic participation, and acquisition strategy. ANTICIPATED REQUIREMENT: New Cyclic Triaxial System - Triaxial testing system with cell. - Electronic components to connect to existing 110V power. - Pressure transducers. - 10 kN internal load cell. - Load ram assembly. - Controller system. - Data acquisition system. - Hydraulic installation kit. - Lifting system. - Base pedestal, top cap, and preparation kits for 38 mm, 50 mm, 70 mm, and 100 mm specimens. - On-specimen LVDTs with signal conditioning kit, consisting of two axial and one radial for each of the 38 mm, 50 mm, and 70 mm specimen sizes. - Displacement transducers. - Control software for advanced dynamic cyclic loading control, including load control. Minimum Overall Requirements - System shall directly interface with the GDS Instruments cyclic triaxial testing system already owned by Reclamation, including existing hardware and software. - Performance specifications conforming to ASTM D3999. - High-accuracy electromechanical actuators. - 10 kN capacity axial load cell. - Axial force accuracy of less than 0.1% of full-scale output and less than 0.4 kN for a 10 kN load cell. - USB computer interface. - 100 mm displacement range with a resolution of 0.2 micrometers. - Operating frequency of 5 Hz. - Ability to test specimens up to 101 mm in diameter. - Ability to deliver cell pressures up to 2 MPa. - Delivery of the entire system to Reclamation's Technical Service Center, Building 56, Door S-7, Denver, Colorado. - Installation and setup shall be simple enough to be completed by Reclamation personnel. Warranty, Experience, and Support Requirements - The system shall include at least a one-year warranty provided by the supplier. - The system must be provided by a supplier who can demonstrate successful construction, commissioning, and sale of at least 5 similar systems worldwide. - Supplier must have qualified service technicians available for any ongoing support, maintenance and repair. - The systems shall be plug-and-play, manufactured with new parts, and include current calibration documentation. Information Requested from Industry Interested parties should submit a concise capability statement addressing each item below and cross-reference supporting product literature. 1. Business name, address, website, point of contact, telephone number, and email address. 2. SAM.gov Unique Entity Identifier, CAGE code, and current registration status. 3. Business size and applicable socioeconomic categories under NAICS 334519, Other Measuring and Controlling Device Manufacturing. 4. Manufacturer, make, model, and commercial product name for each proposed system and major component. 5. Explanation of conformity with ASTM D3999 and any limitations or optional components. 6. Description of control and data acquisition software, dynamic loading and load-control functionality, licensing, operating-system support, and data export. 7. Warranty coverage and duration, technical support, qualified service technician availability, spare-parts availability, and repair approach. 8. Evidence of successful construction, commissioning, and sale of at least 5 similar systems worldwide. 9. Estimated delivery lead time and schedule risks. 10. Country of origin, manufacturing location, and ability to manage customs, import, shipping, and delivery to Denver, Colorado. INSTRUCTION FOR SUBMISSION: Interested parties may submit a response in an electronic format only via email to ConnieAnn Tudela-Kately, connieann_tudela-kately@ios.doi.gov no later than November 6, 2026, 5PM Eastern. Electronic files should be in Microsoft Office Word or PDF format. All information should be UNCLASSIFIED material only. Any proprietary information must be marked as such, the Sources Sought information should not exceed a total of 10 one-sided 8 1/2x11 pages, with one-inch margins, and font no smaller than 12 points.
-Market Research11/06/2026
TSC tTEM V2 SYSTEM UPGRADE with tTEM2 Software, extended functionality (subscription, 12 months) - Sources Sought
-Market Research11/05/2026
BIOMARK PIT TELEMETRY EQUIPMENT
-AwardedOpen
-AwardedOpen

Additional Details

Solicitation Number

P17PS02464

Archive Date

Jan 1, 2022