GovChime
Notice ID: 725f156aadd24b2a696511a780713381Special Notice

Probes

Archived on September 9, 2015. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
8:00 PM UTC+02:00
Posted
August 21, 2015
Notice type
Special Notice
NAICS
334519: Other Measuring and Controlling Device Manufacturing
Agency
Department of the InteriorBUREAU OF RECLAMATION

Notice details

Office
DENVER FED CENTER
PSC
59: ELECTRICAL/ELECTRONIC EQPT COMPNTS
Last updated
Dec 5, 2025

Identifiers

Solicitation number
R15PS01675
Notice ID
725f156aadd24b2a696511a780713381

Description

Synopsis: The Bureau of Reclamation intends to negotiate a sole source contract with GE Bently Nevada for the items listed below: (47) - 330701-00-40-10-01-00 3300 11mm proximity probe - - 20 (47) - 330780-51-00 3300 XL Proximitor (47) - 330730-040-00-00 3300 XL 11mm Extension Cable (21) - 400102-01 50mm Air Gap 2 inch Sensors (21) - 400100-100-02 Proximitor Air Gap Sensors (21) - 400130-100 Air Gap 50 mm Extension Cable Products must have American Petroleum Institute (API) Standard 670, which covers the minimum requirements for a machinery vibration system. (API Standard 670 is required for all hydropower installations in Reclamation) Must have 160 mils of linear range greater or equal to, starting at 20 mils. (This is required since some of our generators have a large linear range and probes under this specification will not work.) Must have at least a 8 kHz frequency response, with 3db and up to 1,000 feet of field wiring. (The 8 kHz frequency response will be needed in order to capture the shaft at deviation while it is spinning with enough resolution to do calculations in the TSC Machine Condition Monitoring software) The system length must be greater or equal to 5 meters including extension cable. ( The 5 meter cable will allow enough length to bring the signals to a junction box, without making any splices) The maximum power consumption must be less than or equal to 12 mA. (This low power consumption will allow us to buy a smaller power supply and will use less energy over time.) The statutory authority for other than full and open competition is 10 USC 2304 (c) (1), only one responsible source and no other supplies or services will satisfy agency requirements. If firms believe they have the technical capability to meet this need, submit a technical capability statement along with business profile to Mrs. Christina Mohamed at cmohamed@usbr.gov within 3 days of this notice. Any information received will be treated as market research information towards future similar or same requirement. Quotations or proposals received in response to this notice will not be accepted since this synopsis is not a request for quote or a request for proposal.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

No documents available.

Lifecycle

Solicitation:R15PS01675
  1. Special NoticeCurrentAug 21, 2015

    Probes

    Notice 725f156aadd24b2a696511a780713381 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
Response Due 11/19/2026 03:00 PM Pacific Daylight Time Please reference this solicitation number SPMYM2-27-Q-0051 PROBE EDDY CURRENT in the subject line of your email. DLA PUGET SOUND intends to procure PROBE EDDY CURRENT manufactured in accordance with material specifications. The solicitation will be issued 100% TOTAL SMALL BUSINESS SET ASIDE using commercial and simplified acquisition procedures in accordance with FAR Parts 12 and 13.5. The resultant award will be a firm fixed-price supply contract for FOB Destination delivery to Bremerton, WA. 98314. Unless a proposed delivery is clearly specified within submitted offer, Delivery Requested on or before January 26, 2027 Requested Delivery date will be adjusted at time of the award. The NAICS Code is 334519 The Product Service Code (PSC) is 6635 ALL QUESTIONS REGARDING THE SOLICITATION SHALL BE SUBMITTED VIA EMAIL. Offerors proposing less than the entire effort specified herein may be determined to be unacceptable. Proposed pricing shall be provided on a unit price line-item basis in the solicitation. Only fully completed quotes submitted with completed and signed solicitation will be considered. Offers wishing to submit a quote are responsible for downloading their own copy of the RFQ and for frequently monitoring the site for any amendments. Firms interested in submitting offers must: 1)complete the pricing, 2) complete all representations and certifications found in the solicitation, 3) provide manufacturer information of proposed items, 4) return all pages of the completed original solicitation package, 5) ensure current registration in the system for award management (SAM.gov)
69%
Combined Synopsis11/19/2027
Proposed procurement for NSN 6655001650452 PROBE,BATHYTHERMOGR: Line 0001 Qty 20 UI PG Deliver To: W1A8 DLA DISTRIBUTION By: 0085 DAYS ADO Approved source is 16848 211105-1. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
69%
Combined Synopsis11/24/2026
Proposed procurement for NSN 5996016076915 AMPLIFIER,ELECTRONIC C: Line 0001 Qty 22 UI EA Deliver To: By: 0141 DAYS ADO This Solicitation may result in an Automated IDC (Indefinite Delivery Contract). The term of the contract/order will be one year or until the aggregate total of orders placed against the contract/order reach 350000.00. The estimated number of orders per year is 2. The Guaranteed Minimum quantity will be 3. Items will be shipped to various CONUS and OCONUS (via consolidation and containerization point) DLA Depots. Approved source is 06401 60087773-000. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
53%
Combined Synopsis12/01/2026
Proposed procurement for NSN 5996003375158 AMPLIFIER,ELECTRONIC C: Line 0001 Qty 8 UI EA Deliver To: DLA DISTRIBUTION DEPOT HILL By: 0202 DAYS ADO Approved sources are 10138 113756; 22830 113756. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.
53%
Combined Synopsis11/16/2026
Small-Diameter Soil Cyclic Triaxial Testing System THIS IS NOT A SOLICITATION FOR PROPOSALS THIS IS A SOURCES SOUGHT SYNOPSIS ONLY This Sources Sought is for the purpose of identifying firms that can meet the following Bureau of Reclamation Requirements. The Bureau of Reclamation (BOR) has a requirement for Small-Diameter Soil Cyclic Triaxial Testing System, under NAICS 334519 - Other Measuring and Controlling Device Manufacturing. GOVERNMENT DISCLAIMER This notice is issued solely for market research and planning purposes. It is not a solicitation and does not obligate the Government to issue a solicitation or award a contract. The Government will not pay for information submitted in response. Responses may be used to assess commercial availability, technical feasibility, potential sources, socioeconomic participation, and acquisition strategy. ANTICIPATED REQUIREMENT: New Cyclic Triaxial System - Triaxial testing system with cell. - Electronic components to connect to existing 110V power. - Pressure transducers. - 10 kN internal load cell. - Load ram assembly. - Controller system. - Data acquisition system. - Hydraulic installation kit. - Lifting system. - Base pedestal, top cap, and preparation kits for 38 mm, 50 mm, 70 mm, and 100 mm specimens. - On-specimen LVDTs with signal conditioning kit, consisting of two axial and one radial for each of the 38 mm, 50 mm, and 70 mm specimen sizes. - Displacement transducers. - Control software for advanced dynamic cyclic loading control, including load control. Minimum Overall Requirements - System shall directly interface with the GDS Instruments cyclic triaxial testing system already owned by Reclamation, including existing hardware and software. - Performance specifications conforming to ASTM D3999. - High-accuracy electromechanical actuators. - 10 kN capacity axial load cell. - Axial force accuracy of less than 0.1% of full-scale output and less than 0.4 kN for a 10 kN load cell. - USB computer interface. - 100 mm displacement range with a resolution of 0.2 micrometers. - Operating frequency of 5 Hz. - Ability to test specimens up to 101 mm in diameter. - Ability to deliver cell pressures up to 2 MPa. - Delivery of the entire system to Reclamation's Technical Service Center, Building 56, Door S-7, Denver, Colorado. - Installation and setup shall be simple enough to be completed by Reclamation personnel. Warranty, Experience, and Support Requirements - The system shall include at least a one-year warranty provided by the supplier. - The system must be provided by a supplier who can demonstrate successful construction, commissioning, and sale of at least 5 similar systems worldwide. - Supplier must have qualified service technicians available for any ongoing support, maintenance and repair. - The systems shall be plug-and-play, manufactured with new parts, and include current calibration documentation. Information Requested from Industry Interested parties should submit a concise capability statement addressing each item below and cross-reference supporting product literature. 1. Business name, address, website, point of contact, telephone number, and email address. 2. SAM.gov Unique Entity Identifier, CAGE code, and current registration status. 3. Business size and applicable socioeconomic categories under NAICS 334519, Other Measuring and Controlling Device Manufacturing. 4. Manufacturer, make, model, and commercial product name for each proposed system and major component. 5. Explanation of conformity with ASTM D3999 and any limitations or optional components. 6. Description of control and data acquisition software, dynamic loading and load-control functionality, licensing, operating-system support, and data export. 7. Warranty coverage and duration, technical support, qualified service technician availability, spare-parts availability, and repair approach. 8. Evidence of successful construction, commissioning, and sale of at least 5 similar systems worldwide. 9. Estimated delivery lead time and schedule risks. 10. Country of origin, manufacturing location, and ability to manage customs, import, shipping, and delivery to Denver, Colorado. INSTRUCTION FOR SUBMISSION: Interested parties may submit a response in an electronic format only via email to ConnieAnn Tudela-Kately, connieann_tudela-kately@ios.doi.gov no later than November 6, 2026, 5PM Eastern. Electronic files should be in Microsoft Office Word or PDF format. All information should be UNCLASSIFIED material only. Any proprietary information must be marked as such, the Sources Sought information should not exceed a total of 10 one-sided 8 1/2x11 pages, with one-inch margins, and font no smaller than 12 points.
46%
Market Research11/06/2026

Additional Details

Solicitation Number

R15PS01675

Archive Date

Sep 9, 2015