GovChime
Notice ID: 05f299e871dc4822a797387ff9d1c1d2Sources SoughtArchived

Instrument Calibration and Preventative Maintenance Services/Repair for four (4) Tinius Olsen, RIA-JMTC Materials Science Lab at Rock Island Arsenal

Archived on November 26, 2025. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
12:00 PM CST
Posted
November 4, 2025
Notice type
Sources Sought
Set-aside
No Set aside used
NAICS
334519: Other Measuring and Controlling Device Manufacturing
Agency
Department of WarDepartment of the Army

Notice details

Office
AMC.ACC.ACC-CTRS.ACC RI.W6QK ACC-RI
Place of performance
Rock Island, Illinois, 61299
Last updated
Nov 6, 2026
First published
Last updated on SAM.gov

Identifiers

Solicitation number
W519TC-26-Q-AT00
Notice ID
05f299e871dc4822a797387ff9d1c1d2

Description

Sources Sought:

Title: Instrument Calibration and Preventative Maintenance Services/Repair for four (4) Tinius Olsen, RIA-JMTC Materials Science Lab at Rock Island Arsenal

Product Service Code: J049

NAICS Code: 334519

This is a Sources Sought Notice and NOT a solicitation announcement.  The purpose of this notice is to gain knowledge of potential qualified sources for the Instrument Calibration and Preventative Maintenance Services/Repair for four (4) Tinius Olsen, RIA-JMTC Materials Science Lab at Rock Island Arsenal in support of the Joint Manufacturing and Technology Center (JMTC). 

The U.S. Army Contracting Command-Rock Island (ACC-RI) is seeking sources only. ACC-RI intends to consider all capability statements when developing its finalized acquisition strategy and resulting solicitation(s).

Please submit all capability statements as outlined below by 12:00 P.M. CST on November 11, 2025, by email to angel.j.traman.civ@army.mil.

This is for information only which may be used for planning purposes and should not be construed as a Request for Quote or as an obligation on the part of the Government. The Government does not intend to award a contract on the basis of this request or otherwise pay for the information solicited. ACC-RI will only utilize the information you provide in developing its acquisition approach for future requirements.

Please provide a capability statement to include supporting information and documents to support the vendor’s ability to perform this requirement in accordance with Attachment 0001 – DRAFT Statement of Work (SOW). The capability statement should clearly address the following areas:

  1. Vendor’s Size Standard, DUNS Number, EUI, Cage Code
  2. Accredited in ISO/IEC 17025 or equivalent to standard ISO standards.
  3. Qualified personnel to be performed by factory certified representatives.
  4. Qualified personnel provide unlimited phone support.
  5. Personnel shall provide unlimited emergency on-site support within 2 business days.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Contracting Officer

Primary Contact

Documents

Files (2)

  • Attachment 0001-SCOPE OF WORK.pdf

    167 KBAdded in Sources Sought version 3Posted
    Download
  • Sources Sought Tinius Olsen Testing Equipment.pdf

    79 KBAdded in Sources Sought version 3Posted
    Download

Lifecycle

  1. 3
    Version 3Sources SoughtArchivedCurrent

    Instrument Calibration and Preventative Maintenance Services/Repair for four (4) Tinius Olsen, RIA-JMTC Materials Science Lab at Rock Island Arsenal

    Notice 05f299e871dc4822a797387ff9d1c1d2 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
SYNOPSIS: This Sources Sought Announcement is to assist the US Army DEVCOM Soldier Center to identify potential sources to provide expert engineering support to trouble shoot process control system providing steam water and air. Must have expertise in process control plumbing and control valves for steam systems. Must have expertise in Allen Bradley PLC programming. The Government requests that responses be submitted electronically to mary.k.prebensen.civ@army.mil and Wesley.s.shaw.civ@army.mil by November 26th, 2026 by 5pm EST. Background: The Government (DEVCOM Soldier Center) is in need of expert engineering support to diagnose current PLC and piping system which support multiple hydraulic press systems. The existing system controls water, steam and air to molding tooling, and the PLC operates on custom Allen-Bradley control software. As it stands, the system is physically installed, however does not provide necessary temperature control in either manual or automatic modes. Issues may be traced to the original system design, pipe rack installation, PLC programming or some combination of the three. Description: Expert engineering services are sought to diagnose newly installed PLC control system to ensure that it can meet system design requirements, can be operated safely and reliably, and is adaptable for future operation and changing requirements. A new PLC system has been designed and installed per a list of system requirements, however is not able to control temperature per design requirements either due to control logic, poor valve selection or related piping design/installation. SC requires a 3rd party engineering service to validate as-built drawings against the installed system, verify/update PLC programming, provide necessary hardware changes to bring the system up to full operability. Specific System Specifications: Electric steam boiler provides 125psi dry steam as primary heat source for molding tooling. Standalone chiller provides chilled water at ~60 psi, and house air provides air for purge and mist functions. The Allen-Bradley PLC system controls the various media through a series of modulating valves to heat or cool the tooling. The PLC is intended to have recipe writing and management for automated control. Basic recipe for our process includes steam heat via pressure control to desired temperature setpoint, hold for ~1 hr while controlling temperature. The tooling is then cooled with chilled water at a controlled cooling rate. Our standard tooling includes an upper and lower platen, and the PLC has capability to control these independently. Additional system requirements will be included if there is a future RFP. Current known system issues: System will not maintain equivalent temperature for upper and lower platens during heat up or hold. System will not control cooling rate based on system feedback loop. System trend screen not displaying data correctly. System alarms remain untested. Mist function does not function without vibration of piping rack. Unique Vendor qualifications: Potential vendor must be US based and employ US citizens identified to work on the PLC system due to sensitivity of materials and products produced by the installation laboratory. Potential vendor must be licensed in process system design with specific expertise in steam controls. Potential vendor must be able to read modify and update Allen Bradly system code. Deliverables: Full system walkdown and comparison to As-built drawings. Analysis of system design, layout, valve selection, PLC operability as compared to provided list of system requirements. List of proposed design changes to meet system requirements and cost of implementation. Install required hardware and make required changes to system software. May subcontract for implementation of hardware changes. Provide updated As-built drawings for plumbing systems, electrical systems, PLC controls systems. System demonstration and verification to the As-built drawings provided Modified code in digital and hardcopy. Verified system manual. Full system demonstration and minimum 1 day training on system operation. Delivery Date: Government estimates work will be completed within 6 months of date of contract award. Government Furnished Property (Equipment/Materials/Information/Computer Utilization): All work to be performed on site at SC with access to existing PLC and piping rack. Interested parties are invited to submit a response to this Sources Sought Announcement. THIS IS A SOURCES SOUGHT ANNOUNCEMENT ONLY This Sources Sought Announcement is issued solely for information and planning purposes and to identify interested sources. THIS IS NOT A SOLICITATION. No contract will be awarded from this announcement. This Sources Sought does not constitute a Request for Proposal (RFP) or a promise to issue an RFP in the future. It is subject to change and is not binding on the Government. Further, unsolicited proposals will not be accepted. Funding is not available at this time. The United States Army has not made a commitment to procure any of the items/services discussed, and release of this Sources Sought Announcement should not be construed as such a commitment or as authorization to incur cost for which reimbursement would be required or sought. Response to this Sources Sought Announcement is voluntary and no reimbursement will be made for any costs associated with providing information in response to this and any follow-on information requests. All submissions become Government property and will not be returned. Not responding to this Sources Sought Announcement does not preclude participation in any future RFP if any is issued. If a solicitation is released, it will be synopsized in the SAM.gov website. It is the responsibility of the potential responders to monitor this site for additional information pertaining to this subject. RESPONSES: Interested parties may identify their interest and capability by sending responses regarding this requirement to DEVCOM Soldier Center via e-mail to mary.k.prebensen.civ@army.mil and Wesley.s.shaw@army.mil no later than November 26th, 2026 by 5:00 p.m. EST. The U.S. Government will not pay for any information or administrative cost incurred in response to this Notice. All costs associated with responding to this Notice will be solely at the expense of the interested party. Please provide business size (indicate your socioeconomic status), applicable NAICS code, and CAGE code. If you hold a GSA Federal Supply Schedule contract, please identify your contract number. QUESTIONS: Any questions for clarification may be emailed to mary.k.prebensen.civ@army.mil and Wesley.s.shaw@army.mil no later than November 20th, 2026 by 5:00 p.m. EST. Verbal questions will NOT be accepted. Questions shall NOT contain proprietary or classified information. An unattributed list of questions and answers will be published at the same web location of this Sources Sought Announcement.
53%
Market Research11/26/2026
Simplified Acquisition - Annual PM, calibrations, and repairs of chassis dynamometers and road speed fan located at the EPA's NVFEL
51%
AwardedOpen
NOTICE OF INTENT TO SOLE SOURCE AND IS RESTRICTED TO SUPER SYSTEMS INC. CAGE: 3DYS7 / UEI: TK4EB1EKHDN3 Contractor Address: 7205 Edington DR, Cincinnati, Ohio, 45249-1064, United States Requirement: MAINTENANCE - ELECTRICAL PIT FURNANCE #37 SERVICE & Parts Upgrade Purpose: To have Super Systems Incorporated provide a complete electrical controls upgrade with Super System INC. proprietary controls and software to communicate with existing SKADA Super Data System already installed in Heat Treat Forge, for recording and monitoring purposes, flow rack upgrade, and an updated electrical drawing packet for Electrical Pit Furnace. *This is a notice of intent to sole source to Super Systems INC. due to proprietary control and OEM capability, which is restricted to Super Systems INC. only.*
48%
Special Notice11/10/2026
Q&A's: 1. CLINs 0001 through 0005 (pages 3-5) are each one firm-fixed-price lot for "Inspection and calibration." SOW paragraphs 1 and 4.2 (pages 1-2) call for lapping only of plates that are out of specification, the QASP (Attachment 0002, page 1) says lapping repairs must be authorized by the CO or COR, and Section G, paragraph 6.a (page 12) asks for labor rates. Should each year's lot price cover inspection and calibration of all 18 plates, with lapping priced separately (for example, a per-plate price or an hourly labor rate) and billed only when authorized? Or should the lot price include all lapping that may be needed that year? If lapping is priced separately, where in the quote should those prices or rates be shown? Answer: Firm fixed for calibration of all plates listed in the SOW. Lapping to be priced separately. We don’t know which plates will require lapping or how much lapping per plate will be needed. We are asking for an hourly rate for lapping. Whether the plate is big or small, the hourly rate would be the same. Plates may require a lot of lapping or very little. Pricing lapping by the plate doesn’t seem to make much sense. 2. Each CLIN (pages 3-5) states "All travel shall be in accordance with the Joint Travel Regulation (JTR)," and SOW paragraph 2 (page 1) says invoices will be checked against the contract prices and JTR approved prices. Should travel be included in each year's firm-fixed lot price, or will it be reimbursed separately at JTR rates? If it is reimbursed separately, how should travel be shown in the quote? Answer: Include estimated travel costs in the firm-fixed pricing. The Vendor that gets the award will bill actual costs after the service. 3. Section G, paragraph 6.c (page 12) asks offerors to "concur at the bottom of the Scope of Work (SOW) and sign," but Attachment 0001 ends at paragraph 15.1 on page 4 with no concurrence or signature block. Is it acceptable to add a signed and dated concurrence statement at the bottom of SOW page 4, or to submit a separate signed concurrence page on company letterhead that references Attachment 0001 dated 15 Oct 26? Answer: Either is fine by me. _______________________ All Vendors MUST submit all requirements plus the signed Soliciation to the POC before the closing date and time or they will not be considered for this action.
47%
Combined Synopsis11/09/2026
The Portsmouth Naval Shipyard (PNSY), has a requirement for a multi-year service contract to perform mandatory annual direct verification, calibration, and certification of its Model 84 Charpy V-Notch (CVN) Impact Tester. The resulting contract will be a Firm-Fixed-Price (FFP) vehicle consisting of a Base Year and three (3) annual Option Years, and will include an Over and Above (O&A) CLIN for unscheduled, critical repairs and replacement parts. RFQ DUE DATE EXTENDED - POP Date change
47%
Solicitation11/12/2026

Additional Details

Solicitation Number

W519TC-26-Q-AT00

Archive Date

Nov 26, 2025

Office Address

ROCK ISLAND, IL, 61299-0000