Notice ID: 265e1a2d706546f084f59417cf0162f7JustificationAwarded
Remanufacturing the Miter Gate Actuators of Locks Four and Five
Awarded on July 10, 2026. Full description on SAM.gov.
Overview
- Posted
- June 22, 2026
- Notice type
- Justification
- NAICS
- 333995: Fluid Power Cylinder and Actuator Manufacturing
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- US ARMY CORPS OF ENGINEERS.ENGINEER DIVISION GREAT LAKES AND OHIO.ENDIST PITTSBURGH.W072 ENDIST PITTSBURGH
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
- Award date
- Jul 10, 2026
- Award amount (SAM.gov award notice)
- Not specified
Identifiers
- Solicitation number
- W911WN26P1BT6
- Notice ID
- 265e1a2d706546f084f59417cf0162f7
Description
The US Army Corps of Engineers intends to award the Kerry Company, Inc. with a purchase order to remanufacture the Miter Gate Actuators of Locks 4 and 5 on the Allegheny River. The contractor shall remanufacture both actuators simultaneously to their new and improved design. This contract does not include any modifications or improvements performed on the Cardanic Ring.The work includes disassembly of the motors, electrical testing and inspection of all components for wear and damage, steam cleaning, bake-out, sandblasting of required components, reassembly with two new bearings per actuator, final electrical testing, and painting. The contractor shall provide and install valve kits, approximately 60 gallons of food-grade hydraulic oil, re-hone the cylinders, furnish new pistons with updated seal designs, furnish new glands with updated seal designs, and provide complete seal kits for both the cylinders and hydraulic power units.The contractor shall sandblast and repaint the actuators using Macropoxy 646 at a dry film thickness of 4.0 to 6.0 mils, followed by an Acrolon 218 HS topcoat at a dry film thickness of 2.0 to 4.0 mils in the original factory color. The work also includes repair and re-chroming of the thrust rods, replacement of two bronze bushings in each cylinder trunnion, and furnishing stainless-steel tubing, fittings, and hardware as required.Additional components to be furnished and installed include a quick-disconnect manifold, reservoir end plate, two pressure tubes, two suction strainers, a P3AAN3040 bi-rotational hydraulic gear pump, and a complete set of pump-to-motor couplings and spider assemblies.THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE QUOTES However interested parties may identify their interest and capability to fulfill this requirement by submitting a capability statement no later than 07 July 2026 to the point of contact listed below.SUBMISSION AND CONTACT INFORMATION Responses must include Company name, UEI number, CAGE code, point of contact information, and a detailed capability statement addressing the requirement. DisclaimerDetermination by the Government not to compete this proposed contract action based on responses to this notice is solely within the discretion of the Government.This notice is in accordance with 41 U.S.C. 3304(a)(1) and fulfills the requirement for publicizing proposed contract actions.
Award Overview
Award Number
W911WN26P1BT6
Award Amount (SAM.gov award notice)
Not specified
Award Date
Jul 10, 2026
Awardee
Not specified
Original Solicitation
Notice ID: 265e1a2d706546f084f59417cf0162f7
Posted Date: Jun 22, 2026
Original Response Deadline: Not specified
Contract Details
Contract data not yet available
Contract details typically appear within 2-4 weeks after award; DoD awards are published about 90 days after signature.
Contacts
Contracting Officer
Primary Contact
ISAIAH JOHNSON
Documents
Links (4)
- PIEE Solicitation Module Link for W911WN26P1BT6piee.eb.milPosted
- Web Based Training for the PIEE Solicitation Modulepieetraining.eb.milPosted
- Registration Instructions for the PIEE Solicitation Modulewww.acq.osd.milPosted
- Department of Defense Procurement Toolboxdodprocurementtoolbox.comPosted
Lifecycle
- 1Version 1JustificationCurrent
Remanufacturing the Miter Gate Actuators of Locks Four and Five
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Interested vendors are asked to please fill out the solicitation form titled W911WN26QA056. All questions should be emailed to isaiah.m.johnson@usace.army.mil. All questions will be answered in the form of a solicitation amendment. UPDATE 8/10/26 Please see Attachments 1a and 1b for pictures of the current actuators on site. | - | Solicitation | 08/13/2026 |
The US Army Corps of Engineers, Pittsburgh District, is looking for a manufacturer to provide gate valve actuators. Please see document with specifications below. If your company is interested, please email the contract specialist, Isaiah Johnson, a capability statement for your company at isaiah.m.johnson@usace.army.mil. | - | Market Research | 07/23/2026 |
DescriptionThe US Army Corps of Engineers (USACE), Pittsburgh District intends to award a sole source purchase order to AUMA Actuators, Inc., under the authority of Revolutionary FAR Overhaul (RFO) 12.102(a), restricting competition for acquisitions valued at or below the simplified acquisition threshold (SAT). This requirement is for sixteen (16) new actuators at Allegheny River Lock and Dam Four (4). Sole Source Justification The requirement is needed to replace all sixteen (16) AUMA actuators used for operating the filling and emptying valves in the single chamber at Lock and Dam No. 4 on the Allegheny River.AUMA shall manufacture sixteen SAR10.2/AC01.2 multi-turn electric actuators with remote mount actuator control units. These units must be functional equivalents to the original AUMA SA10.1-108 previously supplied to the project.A full Justification and Approval has been prepared in accordance with agency procedures and will be available upon request. THIS NOTICE IS NOT A REQUEST FOR COMPETITIVE QUOTES However interested parties may identify their interest and capability to fulfill this requirement by submitting a capability statement no later than 27 April 2026 to the point of contact listed below.SUBMISSION AND CONTACT INFORMATION Responses must include Company name, UEI number, CAGE code, point of contact information, and a detailed capability statement addressing the requirement. Disclaimer Determination by the Government not to compete this proposed contract action based on responses to this notice is solely within the discretion of the Government.This notice is in accordance with RFO 5.101 and RFO 5.201 and fulfills the requirement for publicizing proposed contract actions. | - | Market Research | 05/07/2026 |
*************** PIEE SYSTEM IS EXPERIENCING TECHNICAL DIFICULTIES. IF YOU CANNOT SUBMIT YOUR QUOTES THROUGH THE PIEE SYSTEM. PLEASE EMAIL THEM TO MATTHEW RHOADS- MATTHEW.T.RHOADS@USACE.ARMY.MIL AND DOMENIC SESTITO - DOMENIC.L.SESTITO@USACE.ARMY.MIL********************************* This Solicitation, W912BU26QA007, is issued as a Request for Quotation (RFQ), per the below: The intent of this procurement action is to procure a replacement Pentair Aurora Model 423 fire pump for the Dredge McFARLAND. This pump is a direct OEM replacement for the existing pump. Non-OEM replacement pumps are not acceptable. Delivery: The pump shall be delivered to the destination within 20 weeks of the contract award date. Solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2025-06, published 26 August 2025. Clauses and Provisions are available online at www.acquisition.gov. This solicitation is set aside 100% for small business under NAICS Code 333998 - All Other Miscellaneous General Purpose Machinery Manufacturing, the small business size standard is 700 employees. Quotes shall be submitted through PIEE no later than 2:00 PM EST on Tuesday, 20 January 2026. Quotes shall include pricing information, vendor CAGE code, and Unique Entity identification number (UEI). All vendors must be registered and active in SAM.gov. Please contact the Contract Specialist, Matthew Rhoads, at Matthew.T.Rhoads@usace.army.mil for questions regarding this Solicitation. Award will be made based on the lowest quote meeting the technical requirements. | - | Solicitation | 01/20/2026 |
Salient Characteristics Rods and Assembly FINALThe Government requires the following new, unused industrial fluid-power components (or equal) for machine-shop use. Items must meet or exceed these essential physical, functional, and performance characteristics. Offers of equal items must clearly demonstrate interchangeability, mounting compatibility, pressure/flow ratings, and dimensional equivalence. Delivery is required by NLT dates listed below with requirement(s).CLIN 0001 - Rotary Actuators (Qty: 3 EA)Type: Rotary actuator (S74 series or equivalent)Operating pressure: 1,000 PSIConfiguration equivalent to S74DC-74-180 (double-acting, specified rotation/mounting)Must be suitable for industrial hydraulic service and compatible with existing plant machineryRequired delivery: 7 December 2026CLIN 0002 - Pneumatic Cylinders (Qty: 6 EA)Type: Pneumatic linear cylinder (LPM series or equivalent)Bore: 3.00 inchesStroke: 1.00 inchConfiguration equivalent to 3.004RLPM91.00Required delivery: 7 December 2026CLIN 0003 - Hydraulic Motor Assemblies (Qty: 6 EA)Type: Hydraulic motor assembly (PMD type or equivalent)Configuration equivalent to TE0230C5100AAAARequired delivery: 7 December 2026Common requirements for all itemsNew manufacture only (no used, surplus, or refurbished)Manufacturers standard commercial warrantyFOB Destination, McAlester Army Ammunition Plant, Building 9 Machine Shop, McAlester, OK 74501All items must be packaged for protection against damage, corrosion, and contamination during shipment and storageThese characteristics represent the minimum essential features needed for form, fit, and function. Vendors offering [or equal] products must provide technical data (catalog cuts, drawings, or specifications) demonstrating compliance.Salient Characteristics The Government requires three (3) new, unused heavy-duty industrial hydraulic cylinders (or equal) that meet or exceed the following essential characteristics for form, fit, and function. Offers of [or equal] items must include complete technical data (catalog cuts, drawings, or specifications) demonstrating interchangeability, mounting compatibility, pressure rating, and dimensional equivalence.CLIN 0004 Item Description (Qty: 3 EA)Type: Heavy-duty industrial hydraulic cylinder, Parker Hannifin Series 2H (or equal)Bore diameter: 4.00 inchesStroke length: 12.00 inchesNominal operating pressure: 3,000 PSIMounting style: Side lug (NFPA MS2) equivalent to the specified configurationFull configuration equivalent to Parker model 4.00CSB2HHNAT119AC12.00 (includes the specific rod diameter/code, porting, seals, cushions, and other features of this catalog number)Must be suitable for industrial hydraulic service and compatible with existing plant machineryAdditional Requirements (all items)New manufacture only (no used, surplus, or refurbished material)Manufacturers standard commercial warrantyFOB Destination: McAlester Army Ammunition Plant, Building 8, McAlester, OK 74501Required delivery: NLT 18 November 2026Proper packaging to protect against damage, corrosion, and contamination during shipment and storageThese characteristics represent the minimum essential features needed. Vendors offering equivalent products must clearly demonstrate that their cylinders meet or exceed all listed performance, dimensional, and mounting requirements.Salient Characteristics The Government requires the following new, unused industrial hydraulic cylinder and associated mounting hardware (or equal) for machine-shop use at McAlester Army Ammunition Plant. Offers of [or equal] items must include complete technical data demonstrating form, fit, function, interchangeability, mounting compatibility, pressure/load ratings, and dimensional equivalence with the specified Parker Hannifin parts. All items must be suitable for industrial hydraulic service.CLIN 0005 - Hydraulic Cylinder (Qty: 3 EA)Type: Heavy-duty industrial hydraulic cylinder, Parker Hannifin Series 2H (or equal)Bore: 3.25 inches (3-1/4inch)Stroke: 12.00 inchesOperating pressure: 3,000 PSIMounting: Side lug (NFPA MS2) equivalent to configuration 3.25CSB2HHNAT119AC12.000 (includes specified rod, ports, seals, and cushions)Required delivery: NLT 17 November 2026CLIN 0006 - Spherical Rod Eye (Qty: 3 EA)Parker P/N 0961000138 (0138 / RES-13 or equal)Hole diameter (CD): 1.375 inches (1-3/8inch)Thread (KK): 1-1/4inch-12Load rating: approximately 28,600 lbs (tension, 4:1 design factor)Must be SB-style alignment accessory compatible with Series 2H cylindersCLIN 0007 - Clevis Bracket (Qty: 3 EA)Parker P/N 0839500000 (SB 0137 or equal)Must match the 0138 spherical rod eye for proper mounting and alignmentCLIN 0008 - Spherical Rod Eye (Qty: 3 EA)Parker P/N 0961000100 (0100 or equal)Must be dimensionally and functionally interchangeable with the specified Parker spherical rod eye for the companion cylinder/rod sizeCLIN 0009 - Pivot Pin Assembly (Qty: 3 EA)Parker P/N 0839640000 (1inch Pivot Pin Assembly or equal)1-inch pivot pin, complete assembly, compatible with the associated clevis/rod-eye hardwareCommon requirements for all itemsNew manufacture only (no used, surplus, or refurbished)Manufacturers standard commercial warrantyFOB Destination: McAlester Army Ammunition Plant, 1 C-Tree Road, Building 8, McAlester, OK 74501Required delivery: NLT 17 November 2026Proper packaging to protect against damage, corrosion, and contaminationThese characteristics represent the minimum essential features needed. Vendors offering equivalent products must clearly demonstrate that their items meet or exceed all listed performance, dimensional, threading, load, and mounting requirements for interchangeability with the specified Parker Series 2H cylinder and accessories. | - | Combined Synopsis | 11/13/2026 |
Additional Details
Solicitation Number
W911WN26P1BT6
Archive Date
Jun 22, 2027
Office Address
PITTSBURGH, PA, 15222-4198