Notice ID: a89a5f43869c4a6da08cc01dae9185b5Combined Synopsis/Solicitation
Small Arms Ammunition for the Arkansas National Guard Marksmanship Training Center
Archived on September 8, 2023. Original response deadline: . Full description on SAM.gov.
Overview
- Response deadline
- 7:00 AM UTC−05:00
- Posted
- August 23, 2023
- Notice type
- Combined Synopsis/Solicitation
- Set-aside
- Small Business Set Aside - Total
- NAICS
- 332992: Small Arms Ammunition Manufacturing
- Agency
- Department of WarDepartment of the Army
Notice details
- Office
- W7MW USPFO ACTIVITY AR ARNG
- Place of performance
- North Little Rock, 72199
- Last updated
- Sep 25, 2026
Identifiers
- Solicitation number
- W912JF23R0035
- Notice ID
- a89a5f43869c4a6da08cc01dae9185b5
Description
3,000 rounds of AMMUNITION, RIFLE, 155.5GR BERGER 308 PALMA PART #65-60030. See the attached combined synopsis - solicitation for the detailed requirement.
Award Overview
No prior contract identified
No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.
Contacts
Contracting Officer
Primary Contact
Secondary Contact
Documents
No documents available.
Lifecycle
Solicitation:
W912JF23R0035- Combined Synopsis
- Combined SynopsisCurrentAug 23, 2023
Small Arms Ammunition for the Arkansas National Guard Marksmanship Training Center
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
SUBJECT: Small Arms Ammunition GENERAL INFORMATION CONTRACTING OFFICE’S ZIP CODE* 32827 SOLICITATION NUMBER* 36C24826Q1214 RESPONSE DATE/TIME/ZONE 09-08-2026 10:00 AM EASTERN TIME, NEW YORK, USA ARCHIVE 90 DAYS AFTER THE RESPONSE DATE SET-ASIDE PRODUCT SERVICE CODE* 1305 NAICS CODE* 332992 PLACE OF PERFORMANCE POSTAL CODE COUNTRY CONTACT INFORMATION CONTRACTING OFFICE ADDRESS Department of Veterans Affairs Network Contracting Office 8 (NCO 8) Orlando VA Healthcare System 13800 Veterans Way Orlando FL 32827 POINT OF CONTACT* Contract Specialist - Contractor Elesha J Gentry (Contractor) Elesha.Gentry@va.gov 575-491-9194 ADDITIONAL INFORMATION AGENCY’S URL URL DESCRIPTION AGENCY CONTACT’S EMAIL ADDRESS EMAIL DESCRIPTION DESCRIPTION SMALL ARMS AMMUNITION | 80% | Pre-Solicitation | 06/08/2026 |
SMALL ARMS AMMUNITION | 80% | Solicitation | 09/14/2026 |
Reason for amendment is to extend solicitation Cartridge 22 Cal Eley Tenex | 74% | Combined Synopsis | 02/20/2026 |
The U.S. Army Contracting Command - New Jersey (ACC-NJ) is conducting market research on behalf of Combat Capabilities Development Command - Armaments Center (DEVCOM-AC), Munitions Engineering Technology Center (METC), Small Caliber Munitions Division FCDD-ACM-MI at Picatinny Arsenal, NJ. This research is to determine the ability for US-based Contractors to manufacture and produce variable quantities of Metastable Interstitial Composite (MIC) Lead Free Primers (LFPs). These primers are intended for further development and testing of small caliber ammunition from 5.56mm up through Caliber.50. DISCLAIMER: THIS SOURCES SOUGHT IS FOR INFORMATIONAL PURPOSES ONLY. THIS IS NOT A REQUEST FOR PROPOSAL (RFP) TO BE SUBMITTED. IT DOES NOT CONSTITUTE A SOLICITATION AND SHALL NOT BE CONSTRUED AS A COMMITMENT BY THE GOVERNMENT. RESPONSES IN ANY FORM ARE NOT OFFERS AND THE GOVERNMENT IS UNDER NO OBLIGATION TO AWARD A CONTRACT AS A RESULT OF THIS ANNOUNCEMENT. NO FUNDS ARE AVAILABLE TO PAY FOR PREPARATION OF RESPONSES TO THIS ANNOUNCEMENT. ANY INFORMATION SUBMITTED BY RESPONDENTS TO THIS TECHNICAL DESCRIPTION IS STRICTLY VOLUNTARY. RESPONSES WILL NOT BE RETURNED TO THE RESPONDER. NOT RESPONDING TO THIS NOTICE DOES NOT PRECLUDE PARTICIPATION IN ANY FUTURE REQUEST FOR QUOTE (RFQ) OR INVITATION FOR BID (IFB) OR RFP, IF ANY ISSUED. IF A SOLICITATION IS RELEASED, IT WILL BE SYNOPSIZED ON THE GOVERNMENT-WIDE POINT OF ENTRY (GPE). IT IS THE RESPONSIBILITY OF POTENTIAL OFFERORS TO MONITOR THE GPE FOR ADDITIONAL INFORMATION PERTAINING TO THIS REQUIREMENT. REQUIREMENT: Use of lead-based primers in military munitions continues to be a leading source of personnel lead exposure and cause of environmental contamination. As such, the US Army is developing a replacement for lead styphnate percussion primer explosives in small caliber munitions with the objective of further eliminating lead in all caliber cartridges. Research and Development (R/D) efforts involving nanothermite-based primers have demonstrated high potential for a lead-free solution. Advances in water-based mixing and automated loading processes were developed to enable production of metastable interstitial composite (MIC) primers. These processes use a MIC-based material with the addition of sensitizers and gas generating agents to tune the performance characteristics of primers. This technology has high potential for automated manufacturing as opposed to traditional methods of handmade primers that directly expose personnel to explosive materials. The Government is seeking pricing information for the following small caliber percussion primers for 7.62mm, 5.56mm and Cal.50 ammunition respectively. Interested contractors are requested to provide detailed unit pricing for quantities ranging from 0 to 50,000 units. To assist in determining the optimal order quantities for the best overall value, contractors are encouraged to provide tiered pricing structures based on various quantity thresholds. The Contractor will be expected to support various meetings (kickoff, delivery status, recurring technical), and shall be able to handle energetics, and produce and test end item MIC lead free primers that meet the requirements of MIL-DTL-46610. The Contractor will work with the U.S. Government (USG) on primer variants with improved/refined primer formulations that will streamline the manufacturing process and reduce cost without sacrificing quality or safety. All work shall be performed in the U.S. The Contractor shall be capable of all aspects of producing the lead-free primer including but not limited to: - Material procurement - Material batch tracking/lotting - Handling energetic materials and mixing operations - Manufacturing of primers (dosing of MIC material, consolidating, finish assembly) - In-process and final inspections - Ballistic testing - Failure investigations - Submission of test reports - Shipment of MIC LFPs in suitable containers. The USG will receive unlimited rights to any/all technical data developed or delivered. The contractor shall not use any internally developed technical data or any other pre-existing proprietary information, if such a use would in any way prevent the Government from receiving Unlimited Rights. Background: The applicable NAICS Code for this requirement is 332992, Small Arms Ammunition Manufacturing, with a Small Business Size Standard of 1,300 employees. The Product Service Code (PSC) is 1305, Ammunition, through 30mm. Businesses of all sizes are encouraged to respond; however, each respondent must clearly identify their business size in their capabilities statement. Interested vendors are strongly encouraged to submit a capability statement with the information below. SUBMISSION DETAILS: If your organization has the potential capacity to provide the required services, please provide the following information: 1) NAICS and PSC. 2) Full company name, address, primary points of contact and their email addresses, Web site address, telephone number, CAGE Code and DUNS number, and size of business (i.e. large, small, disadvantaged, veteran owned, woman owned, etc.). 3) Ability to provide a product that meets the above specifications. 4) Past Performance: To demonstrate capability, interested parties are requested to provide evidence of past performance. This should include relevant contract numbers, the corresponding dollar values, and points of contact for verification. For each reference, please include a brief description of the work performed to illustrate your experience in providing this or similar products. Vendors must be properly registered in the Government System for Award Management database (SAM). Contractors may obtain information on SAM registration and annual confirmation of requirements by calling 1-866-606-8220, or via the Internet at www.sam.gov. This is a market survey for information only and shall not be construed as a request for a proposal or as an obligation on the part of the US Government. The US Government does not intend to award a contract on the basis of this market survey or otherwise pay for information solicited. Official responses must be submitted at no cost to the US Government by 1:00PM eastern daylight time April 15, 2026, via electronic submittals to Gloria Thoguluva, Contracting Officer (gloria.thoguluva.civ@army.mil) and Roseanne Hooven, Contract Specialist (roseanne.hooven2.civ@army.mil). Phone inquiries will not be addressed; all requests should be submitted in writing via email. Respondents will not be notified of the results of the survey. | 71% | Market Research | 04/15/2026 |
Amendment 001 ? The purpose of this amendment is to; 1. Include Attachment 0010 Drawings which has been determined to be distribution A, unlimited distribution. 2. Update Section J, Attachment 0014 GFP Transportation Checklist to include a QTY of 3 for Pin Spring, Bolt Catch. The Title of Section J, Attachment 0014 has also been updated to GFP Transportation. 3. Update Section J, Attachment 0009 NDA to be a Word Version and not PDF version of the document. Additionally, the drawings have been removed from this document as they are Distribution A. The solicitation response date has remained the same. (End Amendment 001) The U.S. Army Contracting Command - New Jersey, on behalf of the office of the Office of the Project Manager, Maneuver Ammunition Systems (PM MAS), is issuing a Request for Proposal (RFP) for 5.56mm M1042 Loose and M1071 Linked Marking Ammunition Cartridges for use in Close Combat Mission Capability Kit (CCMCK). The M1042 is fired in the M4/M4A1, M16A2/A3/A4 Rifles converted with the CCMCK Conversion Bolt, National Stock Number (NSN) 1005-99-132-2616. The M1071 is fired in the M249 Squad Automatic Weapon (SAW) converted with the CCMCK Conversion Bolt, NSN 1005-99-848-0609. The CCMCK is a user installed temporary weapon conversion system that allows the Warfighter to employ a specific individual weapon at a minimum engagement distance of five feet using low velocity marking ammunition while precluding the weapon from firing standard service ammunition. The marking ammunition is a reduced-energy, non-lethal cartridge, that leaves a bright, water-soluble color marking compound on target upon impact, without penetrating the Warfighters Operational Camouflage Pattern on its Army Combat Uniforms (ACU) or Personnel Protective Equipment (PPE). The visible impact left by the marking compound allows for an accurate assessment of simulated lethality and shot placement. Specifications: The Contractor shall manufacture, test, inspect, package and deliver the 5.56mm M1042 Loose and M1071 Linked Marking Ammunition Cartridges in accordance with the Military Performance Specifications (P-SPECs) MIL-PRF-32313 and MIL-PRF-32315, which shall be the government documents / requirements. The anticipated solicitation will provide details on how to obtain these military specifications. Planned Acquisition: The Government intends to award one Firm Fixed Price (FFP) Requirements contract with five one-year ordering periods (OPs) from Fiscal Year (FY) 26-31. The contract award will be based upon Other Than Full and Open Competition (OTF and OC), in accordance with Federal Acquisition Regulations (FAR) 6.302-1(a)(2)(iii)(B), Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements. This is a Sole Source, full-scale production contract to Ultimate Training Munitions, United Kingdom with a possible maximum limit of contractors obligation to deliver a cumulative total of 255M 5.56mm M1042 Loose and M1071 Linked Marking Ammunition Cartridges. The following Ordering Periods are anticipated: Ordering Period (OP) 1: 12 months from date of award OP 2: 12 months from the end of OP1OP 3: 12 months from end of OP2OP 4: 12 months from end of OP3OP 5: 12 months from end of OP4 | 66% | Solicitation | 04/30/2026 |
Additional Details
Solicitation Number
W912JF23R0035
Archive Date
Sep 8, 2023
Office Address
NORTH LITTLE ROCK, AR, 72199-9600