Notice ID: 28526fe46411435f8acbab94e2b28060Award NoticeAwardedArchived
66--MN-DIVISION OF NATURAL-WATER RESOURCES
Awarded on September 14, 2026. Full description on SAM.gov.
Awarded tounder 47QSWA23D001X (source: SAM.gov award notice)• $36.5K
Overview
- Posted
- September 14, 2026
- Notice type
- Award Notice
- Agency
- Department of the InteriorUS FISH AND WILDLIFE SERVICE
Notice details
- Office
- FWS, IT GOODS
- Last updated
- Oct 28, 2026
- First published
- Last updated on SAM.gov
- Award date
- Sep 14, 2026
- Award amount (SAM.gov award notice)
- $36.5K
Identifiers
- Solicitation number
- 140F1G26Q0072
- Notice ID
- 28526fe46411435f8acbab94e2b28060
- Award number (PIID)
- 47QSWA23D001X
Description
MN-DIVISION OF NATURAL-WATER RESOURCES
Award Overview
Award Number
47QSWA23D001X
Award Amount (SAM.gov award notice)
$36.5K
Award Date
Sep 14, 2026
Awardee
Awardee UEI
ZT2DAH4GB1P9
Awardee CAGE Code
0B194
Awardee Address
221 E LINCOLN AVE, Fort Collins, CO 80524, UNITED STATES
Delivery Order Number
140F1G26F0086
Original Solicitation
Notice ID: 28526fe46411435f8acbab94e2b28060
Posted Date: Sep 14, 2026
Original Response Deadline: Not specified
Contract Details
No FPDS record matches this award number at the same department yet
Contract details typically appear within 2-4 weeks after award; DoD awards are published about 90 days after signature.
Task Orders Under This IDV
Top 10 by total obligated
- $128.0KSigned Dec 17, 2025
- $128.0KSigned Sep 19, 2025
- $98.1KSigned Aug 20, 2026
- $74.2KSigned Sep 14, 2023
- $47.3KSigned Jul 12, 2024
- $36.5KSigned Sep 14, 2026
- $33.0KSigned Feb 18, 2025
- $33.0KSigned Oct 4, 2024
- $33.0KSigned Sep 3, 2024
- $27.1KSigned May 31, 2024
More From This Vendor
Top 5 most recent
- —Signed Mar 11, 2026
- —Signed Dec 13, 2025
- —Signed Dec 2, 2025
- —Signed Jul 16, 2025
- —Signed May 22, 2025
Contacts
Contracting Officer
Primary Contact
Documents
No documents available.
Lifecycle
- 3Version 3Award NoticeArchivedCurrent
66--MN-DIVISION OF NATURAL-WATER RESOURCES
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
Ames National Laboratory (also referred to as the “Laboratory”), operated by Iowa State University (ISU) under Prime Contract DE-AC02-07CH11358, as amended, with the U.S. Department of Energy (DOE), is seeking to acquire an Induction heater with a water chiller option. Specifications for this system are listed in Appendix C. Addendum 1 was posted on 11/18/2026 | 66% | Solicitation | 12/02/2026 |
Small-Diameter Soil Cyclic Triaxial Testing System THIS IS NOT A SOLICITATION FOR PROPOSALS THIS IS A SOURCES SOUGHT SYNOPSIS ONLY This Sources Sought is for the purpose of identifying firms that can meet the following Bureau of Reclamation Requirements. The Bureau of Reclamation (BOR) has a requirement for Small-Diameter Soil Cyclic Triaxial Testing System, under NAICS 334519 - Other Measuring and Controlling Device Manufacturing. GOVERNMENT DISCLAIMER This notice is issued solely for market research and planning purposes. It is not a solicitation and does not obligate the Government to issue a solicitation or award a contract. The Government will not pay for information submitted in response. Responses may be used to assess commercial availability, technical feasibility, potential sources, socioeconomic participation, and acquisition strategy. ANTICIPATED REQUIREMENT: New Cyclic Triaxial System - Triaxial testing system with cell. - Electronic components to connect to existing 110V power. - Pressure transducers. - 10 kN internal load cell. - Load ram assembly. - Controller system. - Data acquisition system. - Hydraulic installation kit. - Lifting system. - Base pedestal, top cap, and preparation kits for 38 mm, 50 mm, 70 mm, and 100 mm specimens. - On-specimen LVDTs with signal conditioning kit, consisting of two axial and one radial for each of the 38 mm, 50 mm, and 70 mm specimen sizes. - Displacement transducers. - Control software for advanced dynamic cyclic loading control, including load control. Minimum Overall Requirements - System shall directly interface with the GDS Instruments cyclic triaxial testing system already owned by Reclamation, including existing hardware and software. - Performance specifications conforming to ASTM D3999. - High-accuracy electromechanical actuators. - 10 kN capacity axial load cell. - Axial force accuracy of less than 0.1% of full-scale output and less than 0.4 kN for a 10 kN load cell. - USB computer interface. - 100 mm displacement range with a resolution of 0.2 micrometers. - Operating frequency of 5 Hz. - Ability to test specimens up to 101 mm in diameter. - Ability to deliver cell pressures up to 2 MPa. - Delivery of the entire system to Reclamation's Technical Service Center, Building 56, Door S-7, Denver, Colorado. - Installation and setup shall be simple enough to be completed by Reclamation personnel. Warranty, Experience, and Support Requirements - The system shall include at least a one-year warranty provided by the supplier. - The system must be provided by a supplier who can demonstrate successful construction, commissioning, and sale of at least 5 similar systems worldwide. - Supplier must have qualified service technicians available for any ongoing support, maintenance and repair. - The systems shall be plug-and-play, manufactured with new parts, and include current calibration documentation. Information Requested from Industry Interested parties should submit a concise capability statement addressing each item below and cross-reference supporting product literature. 1. Business name, address, website, point of contact, telephone number, and email address. 2. SAM.gov Unique Entity Identifier, CAGE code, and current registration status. 3. Business size and applicable socioeconomic categories under NAICS 334519, Other Measuring and Controlling Device Manufacturing. 4. Manufacturer, make, model, and commercial product name for each proposed system and major component. 5. Explanation of conformity with ASTM D3999 and any limitations or optional components. 6. Description of control and data acquisition software, dynamic loading and load-control functionality, licensing, operating-system support, and data export. 7. Warranty coverage and duration, technical support, qualified service technician availability, spare-parts availability, and repair approach. 8. Evidence of successful construction, commissioning, and sale of at least 5 similar systems worldwide. 9. Estimated delivery lead time and schedule risks. 10. Country of origin, manufacturing location, and ability to manage customs, import, shipping, and delivery to Denver, Colorado. INSTRUCTION FOR SUBMISSION: Interested parties may submit a response in an electronic format only via email to ConnieAnn Tudela-Kately, connieann_tudela-kately@ios.doi.gov no later than November 6, 2026, 5PM Eastern. Electronic files should be in Microsoft Office Word or PDF format. All information should be UNCLASSIFIED material only. Any proprietary information must be marked as such, the Sources Sought information should not exceed a total of 10 one-sided 8 1/2x11 pages, with one-inch margins, and font no smaller than 12 points. | 63% | Market Research | 11/06/2026 |
The requirement is for multiple line items. Please see attached combined synopsis. | 62% | Combined Synopsis | 11/19/2026 |
NASA/NSSC has a requirement for Repair and replacement of existing MTS lab Equipment. See the attached SOW and capability statement. All correspondence must reference the notice ID in the subject line to ensure visibility. NOTE: Quotes received in response to this notice will NOT be considered and will not be evaluated by NASA’s Technical End User Team. We are currently only requesting Capability Statements. | 62% | Special Notice | 08/26/2027 |
WI-LA CROSSE FHC-LAB SUPPLIES | 60% | Awarded | Open |
Additional Details
Solicitation Number
140F1G26Q0072
Archive Date
Sep 29, 2026
Office Address
Falls Church, VA, 22041