GovChime
Notice ID: f436a73a45de49bead604c6a301980e6Special Notice

Enforcement Case Support Services

Archived on October 11, 2024. Original response deadline: . Full description on SAM.gov.

Overview

Response deadline
6:30 AM UTC−04:00
Posted
September 16, 2024
Notice type
Special Notice
Set-aside
Total Small Business Set-Aside (FAR 19.5)
NAICS
541310: Architectural Services
Agency
Department of Housing and Urban DevelopmentOFFICE OF INSPECTOR GENERAL

Notice details

Office
CPO : OFF OF CHIEF PROC OFFICER
Place of performance
Washington, DC, 20410
Last updated
Dec 4, 2025

Identifiers

Solicitation number
86615724Q00026
Notice ID
f436a73a45de49bead604c6a301980e6

Description

NOTICE OF INTENT TO ISSUE SOLE SOURCE AWARD This notice is being published in accordance with Federal Acquisition Regulation (FAR) Subpart 5.101 requiring dissemination of information for proposed contract actions. This is a notice of intent to award a sole source contract and is not a request for competitive quotes/proposals. The U.S. Department of Housing and Urban Development (HUD) on behalf of the Office of Fair Housing and Equal Opportunity (FHEO), intends to negotiate with Mark J. Mazz, AIA, LLC of Hyattsville, MD on a sole source basis under the authority of FAR Subpart 6.302-3 (b)(3)(i) Industrial mobilization; engineering, developmental, or research capability; or expert services, to procure Accessibility Compliance Consulting Services to support the review and litigation of Voluntary Compliance Agreements (VCAs). The U.S. Department of Housing and Urban Development intends to issue a one year (one 12-month base year and one 12-month option years); firm fixed price; sole source award contract to Mark J. Mazz, AIA, LLC, a small business. The NAICS Code is 541310 - Architectural Services - primarily to prepare expert analysis, comment, revision and reports on accessibility-related documents and other technical information for the purpose of investigation, monitoring, and implementation of the VCAs and protentional litigation matters. The architect shall be knowledgeable regarding the federal accessibility standards under Section 504 of the Rehabilitation Act, the Americans with Disabilities Act, and the Fair Housing Act, who qualify as an expert in litigation on behalf of the United States government under the Daubert standard and related authorities, and who can meaningfully discern and testify to the differences between federal and state accessibility standards, and who may have knowledge of accessibility violations likely for properties at issue in the subject litigation. The architect will serve as a subject matter expert and consultant regarding the litigation matters. The primary objective is to review, analyze, comment, revise and prepare reports and/or provide architectural advice and expertise relating to deliverables produced by the District of Columbia Housing Authority (DCHA) and/or accessibility consultants under the VCAs or in relation to the other potential litigation matters involving access to facilities, including architectural survey protocols, survey forms and checklists, applicable accessibility standards, survey reports, certifications of compliance with applicable accessibility standards, and other technical documents related to the monitoring and implementation of the various matters. Reports may require onsite accessibility surveying of properties located in the District of Columbia to assess compliance with applicable accessibility standards. Expert advice may require the comparison of architectural standards and codes to deliverables produced by the DCHA and/or accessibility consultants under the VCAs and other referenced matters and recommendations suitable for use by HUD's regulatory team to produce a final version of the proposed standard and associated commentary. Interested sources who submit data are responsible for appropriately marking information if it is proprietary in nature. The Government shall not reimburse interested sources for any information provided. No requests for capability briefings will be honored. The determination not to compete this proposed contract action is solely within the discretion of the Government. Information received will be considered for the purpose of determining whether to conduct a competitive procurement. The Government will not be responsible for any costs incurred by responding to this notice. This is NOT a request for quotes or proposals. Interested parties that believe they could satisfy the requirements listed above for the Office of Fair Housing and Equal Opportunity may clearly and unambiguously identify their capability to do so in writing on or before the response date for this notice. This notice of intent is not a solicitation. Information submitted in response to this notice will be used solely to determine whether competitive procedures could be used for this acquisition. Questions or comments to this Notice of Intent should be directed to the Contacting Officer, Nefertiti Winters, nefertiti.d.wingers@hud.gov and Contract Specialist, Maureen Cameron, maureen.v.cameron@hud.gov via e-mail only (no phone calls/voice mail messages regarding questions will not be accepted and will not receive a response). All responses to this notice of intent must be submitted so that they are received at nefertiti.d.winters@hud.gov and maureen.v.cameron@hud.gov no later than 26 September 2024, at 6:30am EST.

Full description on SAM.gov

Award Overview

No prior contract identified

No prior award matched this notice's agency, NAICS, place of performance and PSC within 18 months. It may be a new requirement.

Contacts

Documents

No documents available.

Lifecycle

Solicitation:86615724Q00026
  1. Special NoticeCurrentSep 16, 2024

    Enforcement Case Support Services

    Notice f436a73a45de49bead604c6a301980e6 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
*10/21/2026- Amendment posted of Questions and responses posed by contractors. Submission due date reemains the same. THIS IS A SYNOPSIS OF PROPOSED CONTRACT ACTION. FOLLOW THE INSTRUCTIONS CONTAINED IN THIS NOTICE FOR RESPONDING TO THIS OPPORTUNITY. The Federal Bureau of Prisons (FBOP), Central (CO), anticipates the need for indefinitedelivery indefinite-quantity (IDIQ), firm fixed-price contracts for supplemental architect-engineer (A-E) services, with a one (1) year base requirement and up to four (4) unilaterally exercised option years, with a possibility for a six-month extention as well. The Government is not obligated to exercise any of the option periods. While the Government anticipates multiple awards, no more than four (4) awards are expected. The services will be for various FBOP facilities throughout the United States. See the Statement of Work attachment for description of services. Most projects will take place in a fully occupied, fully operational, secure correctional environment. Most projects require complex design effort and detail along with extensive coordination between design disciplines, the institutions, and Central Office during design and construction. Firms are to perform services as required by the issuance of individual task orders. The guaranteed annual minimum amount of each contract is $10,000.00 and the estimated annual maximum is $10,000,000. The North American Industrial Classification System (NAICS) code applicable to this requirement is 541310 (Architectural Services). Interested firms must be registered in the System for Award Management (SAM) at https://SAM.gov. This requirement will be fulfilled pursuant to the Federal Acquisition Regulation (FAR) 36.6 and the Brooks Act. Pursuant to FAR Deviation 36.201(b), for any firm(s) receiving award under this requirement, no construction contract may be awarded to the firm (including any of its subsidiaries or affiliates) that designs the corresponding project Firms having the capabilities to perform the services described in this announcement are invited to respond by submitting Parts I and II of the Standard Form 330 (Architect Engineer Qualifications) dated not more than 12 months before the date of this synopsis. The current version of the form along with any extra pages/sections may be retrieved from www.gsa.gov/forms (Type in "SF330" in the Form Name or Number block for a full listing of the associated forms. *** Include a cover letter detailing your firms name and main office address (as registered in sam.gov), UEI#, Tax ID# (TIN), CAGE code, and main point of contact for your firm through out the solicitation process (phone and e-mail). Submissions should be on standard 8.5'' x 11" format. No extraneous attachments. Selection criteria will be based on the following evaluation factors in descending order of importance: Specialized Experience and Technical Competence (32%) Capacity to Accomplish the Work in the Required Time (demonstrated ability to complete projects on time) (27%) Acceptability of an Established Team of Key Personnel (23%) Professional Qualifications Necessary for Satisfactory Performance (including licensed engineers and architects licensed Nationwide)(18%) Submit details (maximum of one page per project) of not more than five significant and/or complex renovation projects completed in the past five years (Utilize Section F of the SF-330). Identify the lead designer and address the design approach with salient features for each project. Discuss how the client's program, function, image, mission, economic, schedule and operational objectives were satisfied by the overall design/planning solution. Include tangible evidence where possible such as certificates, awards, peer recognition, etc., demonstrating design excellence. Provide a client reference contact for each project, including name, title, address, phone, fax, and email. Submit resumes of key personnel outlining commitment to projects and qualifications and relevant experience as individuals and as a team. Highlight sustainability features incorporated into the project design (e.g., energy/water efficiency, waste reduction, use of recycled materials). Submit a narrative outline of not more than one page describing the firm's project management planning, coordination, scheduling and production facilities, capabilities, and techniques for both design and construction inspection (Utilize Section H of the SF-330). Submit a narrative outline (maximum one page) with examples describing the firm's ability to evaluate/develop accurate preliminary project budgets, ability to control project costs during design process, ability to design within funding limitations, methods used to coordinate construction documents, work of various engineering disciplines, and provide general production quality control (Utilize Section H of the SF-330). No fax or paper submissions. Submit electronically through the JEFS APP BOX at link below: https://jefs.app.box.com/f/336fbbe977394048827a238f901db3a3 All submissions should be in Adobe format. Title the file in the following format: 15BBNF26R70000006_ Company Name_SF330 Architect Engineer (A/E) Services for Central Office Electronic copies of each submission shall be compatible with the following software products: Adobe Acrobat Reader 11 and Microsoft Office Suite 2016. Narrative portions of the submission shall be in Adobe Acrobat portable document file (pdf) searchable text format. The Submitter shall not embed sound or video (e.g., MPEG) files into the submission files. Electronic files shall be clearly identified for each volume, section, and item. The Submitter must ensure electronic files are virus-free and shall run an anti-virus scan before submission. Submissions by mail or hand carried will not be evaluated. All responses must be received no later than Wednesday, November 4, 2026, 10:00 AM MST. It is the responsibility of the Submitter to confirm receipt by contacting Alex Jackson, Contracting Officer, at a4jackson@bop.gov. Failure to submit all required information may result in rejection. All submissions received after the exact time specified for receipt shall be treated as late submissions and will not be considered except under facts and circumstances allowed by the Federal Acquisition Regulations (FAR). Based on these submissions, a short-list of no more than six (6) firms will be selected for an interview. Firms should be prepared to discuss their submittals and to demonstrate their ability to fulfill the contract requirements. Final selection will be based on SF-330 submissions and interviews. After the SF-330 review and interview process, four (4) selected firms will be invited to submit a formal proposal and must be prepared to negotiate overhead, profit, and hourly rates for anticipated disciplines for use in negotiating firm-fixed-price contract rates as well as firm-fixed-price task orders to be completed under the contract. All contract awards and task orders thereunder are subject to a determination of fair and reasonable pricing. This acquisition is 100 percent small business set-aside. Firms must be registered in SAM.gov as a small business (see FAR provision 52.219-1 in the Representations & Certifications section of the SAM registration. If you have questions about SAM.gov, Government procurements in general, or need assistance in the preparation of your bid/proposal/offer, a local Procurement Technical Assistance Center (PTAC) may be able to help. The Procurement Technical Assistance Program was authorized by Congress in 1985 in an effort to expand the number of businesses capable of participating in the Government marketplace. To locate a PTAC near you, go to http://www.aptac-us.org.
-Pre-Solicitation11/04/2026
Description The purpose of this announcement is to request new Architect / Engineer (A/E) qualification information for the General Services Administration / Public Buildings Service (GSA/PBS) A/E short selection for Continental United States (CONUS) and Outside Continental United States (OCONUS). WHAT IS THE SHORT SELECTION PROCESS? The short selection process utilizes the procedures set forth in Revolutionary FAR Overhaul (RFO) Federal Acquisition Regulation (FAR) Subsection 36.202-4 for Architect/Engineer (A/E) projects with an estimated total fee less than the simplified acquisition threshold (currently $350,000; see RFO FAR Part 2.101). The A/E's professional qualifications, the firm's geographic proximity, knowledge of the local area as identified on the A/E's SF330, and supplemental information will be used for the first preliminary screening of firms. For each proposed project, GSA will conduct discussions with at least three (3) firms to consider anticipated concepts and compare alternative methods for furnishing services. Additional information may be requested during discussions if necessary to facilitate the final ranking of firms (i.e.: past performance references, specialized experience, capacity, schedule, etc.). Upon conclusion of discussions, the top three firms will be ranked, and a price proposal will be requested from the highest ranked firm. If a fair and reasonable price cannot be negotiated with the highest ranked firm, a request for a price proposal will be sent to the second ranked firm, and so on until an award can be made at a fair and reasonable price. All acquisitions utilizing the GSA A/E short selection list (database) shall be set-aside for small business concerns unless requirements cannot be met by a small business and the Contracting Officer (CO) obtains a proper waiver. WHAT IS THE SHORT SELECTION PROCESS USED FOR? GSA will use the short selection list to award A/E contracts, valued at less than the simplified acquisition threshold (currently $350,000) in CONUS/OCONUS (NOT Estimated Cost of Construction at Award (ECCA). The firm must have NAICS code 541310 - Architectural Services, with a small business size standard of $12.5 million and/or 541330 - Engineering Services, with a small business size standard of $25.5 million. The firm must clearly notate which states/territories they have active production offices and which states they are licensed by November 1, 2026. Most work will be executed for repair and alteration projects within existing Federal Buildings and U.S. Courthouses. The estimated cost of construction at award (ECCA) for a majority of the project requirements could range from, but are not limited to, above micro-purchase threshold for construction (currently $2,000) to annual prospectus threshold (currently $3.961M) or higher. Fees for design services cannot exceed 6% of the ECCA. For more information about the 6% fee limitation, see FAR 15.404-9(c)(4)(ii) (GSA Class Deviation RFO-2025-15) and 41 U.S.C. 3905(b)(3). GSA manages a nationwide real estate portfolio of approximately 360 million rentable square feet, including preserving more than 500 historic properties nationwide. A broad range of services potentially requested under this short list may include, but are not limited to the following: 1. Core Project Life Cycle Services - These services cover the entire project lifecycle, from initial concept to post-construction closeout. Planning and Pre-Design Feasibility, pre-design, and project development studies Master planning Cost estimating Real estate market analysis Assessment and Investigation Existing conditions surveys, and field investigation Building condition survey evaluation reports (exterior and interior) Environmental investigation, reviews, inventories, and audits Energy audits and studies Design and Documentation Concept design, design development, and construction document development (both architectural and engineering) Interior design, including furniture, fixtures, and equipment (FFE) Building standard documents Construction Support and Closeout Constructability review and evaluation Submittal and shop drawing review Management and inspection (M&I) services during construction and construction inspection Building and system commissioning Post construction contract Services (PCCS); Record and close-out documents 2. Specialized Technical & System Design - Work requested often involves the assessment, repair, and upgrade of existing complex building systems. Mechanical, Electrical, and Plumbing (MEP) Full MEP services, including design of HVAC systems, electrical systems, and lighting Assessment and design for mechanical components (e.g., pumps, fans, air handlers, water distribution systems) and air distribution Design of water and waste water systems, including performance of sanitary inspections Temperature control assessment and design and BAS system assessment and integration Building Structure and Envelope Structural evaluation and design Façade evaluation and remediation design Water infiltration investigation and mitigation design safety, security, and compliance Fire and life safety evaluation and design Rehabs to improve energy efficiency and safety concerns Seismic & blast protection and vertical transportation Code compliance 3. A/E Disciplines and Expertise - A/E firms will need staff with licensed and/or specialized expertise. The following are typical disciplines and categories utilized for GSA projects. Firms do not need to have all of them, but should include the most relevant disciplines for their firm: Core Architectural and Engineering Disciplines Architecture and anterior architecture Mechanical engineering, electrical engineering, structural & civil engineering, and plumbing Historic architecture/preservation Specialized Expertise A qualified/licensed fire protection engineer (NCEES)* Security Space planning & workplace Cost estimating and scheduling Environmental services Building automation Scifs Modernization and Quality Control Building information modeling (BIM) Quality control review and report writing SUBMISSION INSTRUCTIONS To be considered for future Architect-Engineer (A/E) projects, your firm must submit a package demonstrating the applicability and comparability of its portfolio to the types of services outlined above. Please submit your complete package as a single PDF document. This file, which should be no larger than 30MB and no more than thirty (30) pages, must contain all submittal documents. Submit your PDF file as an attachment via the online “GSA A/E Short Selection Submission Form” (Link provided below). Note: Hardcopy submissions received by mail will not be filed or considered. The following information shall be submitted as part of the thirty (30) page limit (LISTED IN REQUIRED ORDER): DO NOT SUBMIT ANY PROPRIETARY INFORMATION 1. A cover letter. The letter should outline the work your firm specializes in and include a brief description of your firm's capabilities specifically related to the project examples stated above. 2. SAM Entity Registration Print Out - 1st and 2nd page only to show active registration in System for Award Management (SAM). Registration is required for award of federal contracts and you must have an active registration in SAM to be considered for project work. Contractors may register in SAM free of charge at https://sam.gov/ under the header labeled Register Your Entity or Get a Unique Entity ID. 3. Standard Form (SF) 330 - Architect-Engineer Qualifications. DO NOT include subconsultants. Please include photos of accomplished work. 4. A separate list of the licensed (or will be licensed by November 1, 2026) professionals and the State/territories of their licensing. Note: This A/E short selection process is for Primes only; consultants are NOT part of this selection process. However, submitted project experience may reference work executed with consultants. Firms should highlight their specific role and explain the work they performed alongside any consultants. Consultants will be requested by project managers during project development. Submittals that don't contain the required documentation will be returned for revision and/or non selection. Organizing your submittal package in the same order enumerated above will facilitate a more efficient review process. Questions related to this announcement shall be referred to aeshortselection@gsa.gov The following information should be easily found in your SF330 Submission: 1. Relevant Project Experience, Demonstrated Comparability and Creative Problem Solving Offerors must provide a minimum of three (3) but no more than five (5) comparable project examples that demonstrate a wide range of repair and alterations work similar in budgets and complexities to those anticipated for contracts. An additional maximum of ten (10) relevant projects completed in the last ten (10) years can be submitted in list form. Please include relevant project photographs. A comparable project is defined as an “A/E engagement involving the repair, alteration, or renovation of existing, occupied facilities, with a focus on both architectural and engineering solutions. Specifically, the project should demonstrate specialized experience in: Building system upgrades (e.g., MEP services or mechanical pump replacement) Historic preservation (especially classical building architecture) Workplace design Furthermore, a comparable project's Estimated Cost of Construction at Award (ECCA) should generally range from $50,000 to an annual prospectus threshold (currently $3.961M). Breadth of Scope: Teams must demonstrate proficiency in seamlessly incorporating architecture and engineering to solve both complex and routine design issues within existing buildings. Specialized Expertise: Highlight specialized experience in the areas most critical to the GSA/PBS mission. This must include work in: Occupied buildings Historic preservation, restoration, and adaptive reuse (special consideration will be given to firms demonstrating experience with classical building architecture and design) Building system upgrades (e.g., MEP services, mechanical pump replacement, HVAC systems, electrical systems, and building controls). Workplace design strategies, interior office redesign, and building standard documents Creative Problem Solving: Firms must demonstrate their ability to be creative and "think outside the box" when developing design solutions, especially given the constraints and challenges of government buildings and existing customer agencies while successfully navigating constraints such as schedule and budget. 2. Team Capacity, Management, and Quality Control The team’s ability to manage projects efficiently, flexibly, and collaboratively is essential for handling the unpredictable nature of GSA task orders. Contract Management and Flexibility: Demonstrate the ability to staff and manage contracts on an as-needed basis, accounting for the unpredictable issuance of work in terms of number, size, importance, and urgency. Consultant and Customer Agency Management: The A/E short selection process is for the Architecture or Engineering Prime only, but the firm must demonstrate its ability to manage its entire team. Firms must demonstrate proven success in establishing good relationships with and effectively managing future sub-consultants, as well as managing scope and communication while working with difficult customer agencies. Quality Assurance: Team must demonstrate formalized processes for quality control (QC) and a commitment to QC standards while consistently designing within the project’s budget and schedule limitations. 3. Key Personnel Education and Qualifications Key Personnel should possess the education, professional qualifications, and specific project experience that provides the best opportunity for the successful completion under this contract. Licensing: Provide a separate list of states in which the firm is licensed or will be licensed by November 1, 2026. Specialized Roles: Key Personnel must demonstrate expertise in disciplines relevant to the services outlined above, such as a Qualified Fire Protection Engineer1, historic preservation, etc. 1A Qualified Fire Protection Engineer is an individual with deep knowledge of fire physics and chemistry, meeting one of the following criteria: (a) An engineer with an undergraduate or graduate degree in fire protection/safety engineering, plus a minimum of four (4) years of relevant work experience; (b) A registered Professional Engineer (P.E. or similar) in Fire Protection Engineering; or (c) A P.E. in a related engineering discipline who is a Professional Member of the Society of Fire Protection Engineers and has passed the NCEES fire protection exam. 4. Past Performance Offerors should include CPARS (Contractor Performance Assessment Reporting System) if they have past government experience as the prime. No more than three (3) most recent relevant records. The CPARS information does not count against the thirty (30) page limit. Impact: If a firm does not have past government experience, they will not be negatively impacted during the selection process. Please register to attend the industry outreach and Q&A meeting on October 16 at 9am PDT or October 22 at 3pm EDT by completing the “A/E Short Selection Process Registration Form CONUS/OCONUS” (Link provided below). Invites will be sent out to all registered attendees approximately one week in advance. Relavant Links GSA A/E Short Selection Process for CONUS/OCONUS - Registration Form https://forms.gle/8kd1qZfZeVMag3HG9 GSA A/E Short Selection Process for CONUS/OCONUS - Q&A https://docs.google.com/document/d/1sGIs_KEnEvP99mxeB2VKBS64IVoUixEZSOLsczc_2As/edit?usp=sharing GSA A/E Short Selection Process for CONUS/OCONUS - Submission Form https://forms.gle/7Rh3FkMkubweUHveA
-Market Research10/31/2026
The purpose of this Update is to amended documents to answer questions and update the Performance work statment, solicitation, Total Evaluated Price (TEP) Workbook and Quality assurance plan. As such, The final proposal due date is being updated to Oct 23, 2026 at 1:00PM Central Standard Time. Please review all documents for possible changes. Questions shall be submitted electronically via email with subject line FOUO\\INFO: Solicitation 86614126R00002 Technical Question to CO Travis Sutton at Travis.L.Sutton@hud.gov, CS Christopher Rodriguez Christopher.J.Rodriguez@hud.gov on or before September 29, 2026, at 1:00PM Central Standard Time. Responses to technical questions will be posted as an amendment to this notice. ​​​​​1. Description of Services: The U.S. Department of Housing and Urban Development (HUD) Office of Multifamily Housing requires contractor support to conduct onsite inspections of new construction and substantial rehabilitation of multifamily housing projects and performing various inspection tasks. These services will provide HUD with the field/site data necessary to make informed decisions regarding the construction/rehabilitation phase of HUD multifamily mortgage insurance underwriting and capital advance programs. 2. Acquisition Strategy: The Government is issuing this Request for Proposal (RFP) 86614126R00002 on SAM.gov with the intent to award a Firm-Fixed-Price (FFP)/Indefinite Delivery Indefinite Quantity (IDIQ) contract, in accordance with Revolutionary FAR Overhaul (RFO) 12/15/ as a small business set aside. This is a notice that this order is a total set-aside for small business concerns. Only proposals submitted by small business concerns will be accepted by the Government. Any quote that is submitted by a contractor that is not a small business concern will not be considered for award. 3. Services: The Contractor shall provide services in accordance with the attached Performance Work Statement (PWS), Contract Line-Item Numbers (CLINs), terms and conditions. 4. NAICS Code: 541310 5. Product Service Code (PSC): C219 6. Period of Performance: This contract will consist of one (1) Base Period: 02/01/2027 – 01/31/2032. 7. Contract type: Firm-Fixed-Price (FFP)/Multiple-Award Indefinite Delivery Indefinite Quantity (IDIQ). The government anticipates awarding up to three FFP Multiple-Award IDIQ contract(s) for each of the five (5) regions but reserves the right to combine regions into one contract award if one contractor receives an award for more than one region or expand or reduce the size of a geographic region under an awarded contract. Submitting a proposal for all regions is not required. The government will reject any regional proposal that proposes to only partially perform in the entire region. The resulting contracts will establish the terms, conditions, unit prices, ordering procedures, and maximum ordering limitations applicable to future orders for the required services. The contracts are not intended to constitute a FAR Part 17 multi-year contract or a commitment by the Government to acquire the estimated requirements for each fiscal year of the ordering period. The ordering period may extend across multiple fiscal years. The existence of an ordering period that spans multiple fiscal years does not constitute a Government commitment to acquire services in each fiscal year. Except for the Guaranteed Minimum stated in the contract, the Government does not guarantee that any particular quantity, dollar value, or level of services will be ordered during any fiscal year or during the ordering period. Individual orders will be issued only when the Government has a bona fide requirement and appropriate funding is available. Each order will be separately funded in accordance with applicable fiscal law and the terms of the resulting contract. ORDERING PERIOD The ordering period is established solely to provide the Government with a vehicle for placing orders when requirements arise. The Government does not obligate itself at IDIQ award to purchase the Best Estimated Quantities (BEQs), historical demand quantities, or any other estimated future requirements identified in this Solicitation. The Government may issue no orders or may issue orders in quantities or at times different from the estimates contained in this Solicitation, subject only to the Government's contractual obligations, including the Guaranteed Minimum. The expiration of the ordering period does not constitute a cancellation of a multiyear commitment because the Government is not making a multiyear procurement commitment under this contract. ORDERING Orders shall be issued only by authorized Government personnel in accordance with the Ordering Procedures clause. An order transmitted electronically by an authorized Contracting Officer, including by email when expressly authorized by the Ordering Procedures clause, shall constitute the Government's issuance of the task order. IDIQ Contract Minimum and Maximum Master IDIQ: · Guaranteed minimum: $133,000 · IDIQ maximum ceiling: $37,000,000 For each awarded IDIQ contract: · Guaranteed Minimum Per Region: Northeast Region: $23,000 Southeast Region: $25,000 Southwest Region: $45,000 West Region: $30,000 Midwest Region: $10,000 · Maximum IDIQ Ceiling Per Region: Northeast Region: $6,409,000 Southeast Region: $8,094,000 Southwest Region: $11,818,000 West Region: $8,286,000 Midwest Region: $2,354,000 The guaranteed minimum is the Government's minimum contractual obligation under the IDIQ contract. The maximum IDIQ ceiling is the maximum aggregate quantity/value that may be ordered under the contract, unless otherwise expressly authorized by the contract. Task-Order Limitations The minimum and maximum order limitations stated in FAR 52.216-19, as completed in this solicitation, apply to individual task orders and are separate from the guaranteed minimum and maximum ceiling of the IDIQ contract. 8. Place of performance: LOCATION OF REGIONS AND FEDERAL HOUSING ADMINISTRATION ZONES The contractor must perform the services (i.e., projects) in the following MF Housing (MFH) Region: *** To Be Determined (TBD) at Time of Award *** Northeast Region (by FHA zone): Washington D.C (000) and 13 States: Connecticut (017), Delaware (032), Maine (022), Massachusetts (023), Maryland (052), New Hampshire (024), New Jersey - North (031) and South (035), New York - Buffalo (014) and New York City (012), Pennsylvania - East (034) and West (033), Rhode Island (016), Vermont (026), Virginia (051), and West Virginia (045). Southeast Region (by FHA zone): Puerto Rico/US Virgin Islands (056) and 8 States: Alabama (062), Florida - North (063), Central (067), and South (066), Georgia (061), Kentucky (083), Mississippi (065), North Carolina (053), South Carolina (054), and Tennessee - Knoxville (087), Memphis (081), Nashville (086). Midwest Region (by FHA zone): 6 States: Illinois - Chicago (071) and Springfield (072), Indiana (073), Michigan - Detroit (044), Grand Rapids (047), and Flint (048), Minnesota (092), Ohio - Cleveland (042), Columbus (043) and Cincinnati (046), and Wisconsin (075). Southwest Region (by FHA zone): 9 States: Arkansas (082), Iowa (074), Kansas (102), Louisiana (064), Missouri - East (085) and West (084), Nebraska (103), New Mexico (116), Oklahoma - East (118) and West (117), and Texas - Fort Worth (113), Houston (114), and San Antonio (115). West Region (by FHA zone): 14 States: Alaska (176), Arizona (123), California - Los Angeles (122), Riverside (143), San Diego (129), San Francisco (121) and Northern California (136), Colorado (101), Hawaii (140), Idaho (124), Montana (093), Nevada (125), North Dakota (094), Oregon (126), South Dakota (091), Utah (105), Washington - Spokane (171) and Seattle (127), and Wyoming (109). 9. On-ramp/off-ramp provisions a. ON-RAMP PROCEDURES The Government may conduct an on-ramp during the ordering period when the Contracting Officer determines that additional contract holders are necessary or advantageous to meet Government requirements, increase competition, increase the availability of qualified small businesses, or otherwise support the Government's mission. Any on-ramp competition will be conducted pursuant to a new solicitation or other lawful competitive procedure and will use evaluation criteria and material contract terms consistent with the requirements established for the existing contract vehicle, to the maximum extent permitted by applicable law and regulation. An on-ramp award will not extend the ordering period of the existing contract. The Government does not guarantee that an on-ramp will be conducted or that any additional contract will be awarded. b. OFF-RAMP PROCEDURES The Government may remove a Contractor from the active ordering pool or decline to continue the Contractor's participation in a subsequent ordering period when authorized by the contract and applicable law. Potential grounds for off-ramping may include, but are not limited to: Failure to submit a proposal in response to multiple task-order solicitations when the Contractor was eligible and required to participate; Failure to receive an order during a specified evaluation period, when the solicitation or contract expressly establishes such criterion; Failure to satisfy material contract performance requirements; Repeated failure to satisfy required deliverables or quality standards; Failure to maintain required eligibility or representations; and Other objective criteria expressly identified in the contract. In evaluating whether off-ramping is appropriate, the Government will give priority consideration to relevant past performance on earlier orders under the contract, consistent with applicable law and the evaluation methodology stated in the contract. Off-ramping will not be based solely on a Contractor's failure to receive an order unless the solicitation expressly identifies such failure as an off-ramp criterion and the criterion is applied consistently. c. TEAMING ARRANGEMENTS After award, a Contractor may not add, remove, or substitute team members in a manner that materially changes the basis on which the Government evaluated the Contractor's proposal unless such change is permitted by the contract and applicable law and is approved by the Contracting Officer. Nothing in this provision authorizes a Contractor to modify its post-award teaming arrangement in a manner that circumvents the competition requirements applicable to the contract. 10. Questions: Questions shall be submitted electronically via email with subject line FOUO\\INFO: Solicitation 86614126R00002 Technical Question to CO Travis Sutton at Travis.L.Sutton@hud.gov, CS Christopher Rodriguez Christopher.J.Rodriguez@hud.gov on or before September 29, 2026, at 1:00PM Central Standard Time. Responses to technical questions will be posted as an amendment to this notice. 11. Proposal Submission: Proposals shall be submitted electronically via email with subject line FOUO\\INFO: Solicitation 86614126R00002 – (Insert Company Name and Region). to CO Travis Sutton at Travis.L.Sutton@hud.gov, Christopher Rodriguez at Christopher.J.Rodriguez@hud.gov on or before the closing date of October 23, 2026, at 1:00PM Central Standard Time. Email Submission Size Limitation: Email messages and attachments submitted to HUD shall comply with HUD's maximum email message/file size limitation of 28 megabytes (MBs). If a proposal submission exceeds this limitation, the Offeror shall use additional emails. Offerors are responsible for ensuring timely receipt of their complete proposal in accordance with the submission instructions. Alternate proposals: The solicitation does not authorize offerors to propose alternative terms and conditions or line items. Such alternate proposals will be considered non-compliant / non-conforming, technically unacceptable, and ineligible for award. Alternate proposals will not be evaluated. Alternate proposals will be eliminated and not further evaluated. 12. HUD Contacts: Contracting Officer: Travis Sutton Travis.L.Sutton@hud.gov Contract Specialist: Christopher Rodriguez at Christopher.J.Rodriguez@hud.gov
-Solicitation10/23/2026
The agency notice ID should be 1620000393 Admendment 0002 SVO237-26 posted 09/21/2026 Add additional information in the description for clarification and correct the document number from SVO237-26 to SV0237-26. As provided, all other terms and conditions remain unchanged. Offerors must submit SF 330 Parts I and II and sign and return all admendments. The following Qualifications-Based Selection (QBS) shall be submitted by each offeror illustrating work performed within a correctional environment, addressing each criteria listed below: Professional Qualifications: Licenses, registrations, education, and overall staff capability. Specialized Experience: Past success and technical competence on similar project types. Capacity: Ability to perform the work and meet project schedules. Past Performance: Record of previous work quality, responsiveness, and client satisfaction. Technical Approach: Project understanding, quality control procedures, and innovative concepts. Geographic Location / Local Knowledge: Familiarity with the project locale, though strict local preferences are heavily restricted or capped Once the QBS has been met consideration for a contract award will be based solely upon the hourly rates, overhead and profit that are proposed and found to be fair and reasonable.
-Solicitation11/02/2026
This is a Sources Sought Notice only. This notice does not constitute a Request for Qualifications (RFQ), Request for Proposals (RFP), or Invitation for Bids (IFB), nor does it represent a commitment by the Government to issue a solicitation or award a contract. This Sources Sought Synopsis is issued solely for market research and planning purposes to determine the availability and adequacy of potential sources. It is not a Request for Proposals or Quotes and imposes no obligation on the Government to acquire any goods or services. Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. The Government reserves the right to determine the appropriate acquisition approach based on the results of this market research. Responders should not anticipate feedback regarding their submissions. The Government will not pay for any costs incurred in responding to this Synopsis; all costs associated with responding are solely at the responding party's expense. The information provided herein is subject to change and is non-binding on the Government. The purpose of this notice is to conduct market research to identify potential and qualified sources, assess industry capabilities, and establish effective acquisition strategies, including potential small business set-aside opportunities. No reimbursement will be provided for any costs associated with submitting information in response to this announcement or any follow-up information requests. Overview The General Services Administration (GSA), Public Buildings Service (PBS), is conducting market research to establish Multiple-Award Indefinite-Delivery, Indefinite-Quantity (IDIQ) contracts for comprehensive, multidisciplinary Architect-Engineer (A/E) services. These contracts are intended to provide integrated, sustainable, and adaptive design solutions across federally owned and leased real property nationwide. The Government anticipates awarding multiple contracts with multi-year ordering periods (5 year base with one 5 year option) to support GSA zones and client agencies across the United States and its territories. Expected typical project size is to be above the simplified acquisition threshold of $350,000. The potential place of performance for services rendered under this contract is on an as-needed basis for federal projects anywhere in the United States and its territories. This will require the capability to travel to GSA and other Government agency office locations nationwide. In some instances, performance of services is expected to require the capability for contractors to dispatch personnel to multiple locations simultaneously. The applicable North American Industry Classification System (NAICS) code for this requirement is 541310 (Architectural Services) & 541330 (Engineering Services), which has a small business size standard of $12.5 million and $25.5 million respectively. Scope of Services Services provided under the resulting IDIQ contracts will encompass a comprehensive range of professional A/E design and engineering disciplines. Scopes of work for individual task orders may include, but are not limited to, the following: 1. Core Project Life Cycle Services - These services cover the entire project lifecycle, from initial concept to post-construction closeout. Planning and Pre-Design Feasibility, pre-design, and project development studies Master planning Cost Estimating Real Estate Market Analysis Assessment and Investigation Existing conditions surveys, and field investigation Building condition survey evaluation reports (exterior and interior) Environmental investigation, reviews, inventories, and audits Energy audits and studies Design and Documentation Concept design, Design development, and Construction document development (both architectural and engineering) Interior design, including Furniture, Fixtures, and Equipment (FFE) Building standard documents Construction Support and Closeout Constructability review and evaluation Submittal and shop drawing review Management and inspection (M&I) services during construction and Construction inspection Building and system commissioning Post Construction Contract Services (PCCS); Record and close-out documents 2. Specialized Technical & System Design - Work requested often involves the assessment, repair, and upgrade of existing complex building systems. Mechanical, Electrical, and Plumbing (MEP) Full MEP services, including design of HVAC systems and electrical systems and lighting Assessment and design for mechanical components (e.g., pumps, fans, air handlers, water distribution systems) and air distribution Design of water and waste water systems, including performance of sanitary inspections Temperature control assessment and design and BAS system assessment and integration Building Structure and Envelope Structural evaluation and design Façade evaluation and remediation design Water infiltration investigation and mitigation design Safety, Security, and Compliance Fire and Life Safety evaluation and design Rehabs to improve energy efficiency and safety concerns Seismic & Blast protection and Vertical Transportation Code Compliance 3. Required AE Disciplines and Expertise - AE firms will need staff with licensed and/or specialized expertise in the following disciplines: Core Architectural and Engineering Disciplines Architecture and Interior Architecture Mechanical Engineering, Electrical Engineering, Structural & Civil Engineering, and Plumbing Historic Preservation Specialized Expertise A Qualified/Licensed Fire Protection Engineer (NCEES)* Security Space Planning & Workplace Cost Estimating and Scheduling Environmental Services Modernization and Quality Control Building Information Modeling (BIM) Quality control review and Report writing Submission Requirements Interested firms are invited to submit a written Capability Statement. Submissions must not exceed five (5) pages in length and must address the following elements: A. Company Profile Official company name, street address, telephone number, and primary website URL. Unique Entity Identifier (UEI) and Commercial and Government Entity (CAGE) Code. Office location(s) and primary design production facilities. Business size status under NAICS 541310 or 541330 (Large Business or Small Business). Applicable SBA socio-economic certifications (e.g., 8(a), HUBZone, Service-Disabled Veteran-Owned Small Business [SDVOSB], Woman-Owned Small Business [WOSB], or Economically Disadvantaged WOSB [EDWOSB]). B. Relevant Experience Summarize three to five (3–5) relevant projects completed within the past ten (10) years. Demonstrate experience in projects of similar scale, scope, and complexity, such as federal workplace design, major repairs and alterations, or complex building systems. Include project title, customer/agency point of contact, contract value, role (Prime or Subcontractor), and a brief narrative of the work performed. C. Nationwide Capacity Demonstrate organizational capacity to manage and execute multiple task orders simultaneously across diverse geographic locations nationwide. Describe key disciplines maintained in-house versus those typically fulfilled through subcontractor or joint venture arrangements. Submission Instructions Responses must be submitted electronically via email to the primary procurement contacts listed below: Submission Deadline: Primary Contact: Point of Contact Email: Subject Line Format: Sources Sought Response - National A/E IDIQ - [Firm Name] Hard copies, telephonic inquiries, and late submissions will not be reviewed or acknowledged. All information provided in response to this notice will be used strictly for market research and acquisition planning purposes. This notice encourages participation from qualified small business concerns, including socio-economic program participants, to assist GSA in evaluating the feasibility of small business set-asides for this procurement. All prospective offerors are responsible for monitoring SAM.gov for updates, future notices, or potential solicitations related to this requirement.
-Market Research11/13/2026

Additional Details

Solicitation Number

86615724Q00026

Archive Date

Oct 11, 2024

Office Address

WASHINGTON, DC, 20410