GovChime
Notice ID: 335b27fcdf31c879acf22da0960cdcb7Award NoticeAwarded

C-Architect-Engineer Services for a New US Courthouse in Greenville, Mississippi

Awarded on February 15, 2018. Full description on SAM.gov.

Awarded tounder 47PH0818C0001 (source: SAM.gov award notice)• $3.2M

Overview

Posted
February 15, 2018
Notice type
Award Notice
NAICS
541310: Architectural Services
Agency
General Services AdministrationPUBLIC BUILDINGS SERVICE

Notice details

Office
PBS R7 PROG SUPPORT - CAPITAL AND IDIQ
Place of performance
Greenville, MS, 38701
PSC
C: ARCHITECT/ENGINEER SERVICES
Last updated
Dec 4, 2025
Award date
Feb 15, 2018
Award amount (SAM.gov award notice)
$3.2M

Identifiers

Solicitation number
GS-07-P-17-HH-C-0TBD
Notice ID
335b27fcdf31c879acf22da0960cdcb7
Award number (PIID)
47PH0818C0001

Description

The General Services Administration (GSA) has selected the following team for the Design of the New US Courthouse in Greenville, Mississippi: Duvall Decker Architect | Eskew+Dumez+Ripple 2915 North State Street Jackson, MS 39216

Full description on SAM.gov

Award Overview

Award Number

47PH0818C0001

Award Amount (SAM.gov award notice)

$3.2M

Award Date

Feb 15, 2018

Awardee

Awardee UEI

E7AWKK3ENR29

Original Solicitation

Notice ID: 335b27fcdf31c879acf22da0960cdcb7

Posted Date: Feb 15, 2018

Original Response Deadline: Not specified

More From This Vendor

Top 5 most recent

5
  • 47PE0324C0003
    DUVALL DECKER ARCHITECTS PA
    General Services AdministrationNAICS 541310
    $2.6MSigned Sep 11, 2026
  • 47PE0324C0003
    DUVALL DECKER ARCHITECTS PA
    General Services AdministrationNAICS 541310
    $2.4MSigned Aug 28, 2026
  • 47PE0324C0003
    DUVALL DECKER ARCHITECTS PA
    General Services AdministrationNAICS 541310
    $2.4MSigned May 28, 2026
  • 47PE0324C0003
    DUVALL DECKER ARCHITECTS, P.A
    General Services AdministrationNAICS 541310
    $2.4MSigned Apr 3, 2025
  • 47PE0324C0003
    DUVALL DECKER ARCHITECTS, P.A
    General Services AdministrationNAICS 541310
    $2.4MSigned Feb 20, 2025

Contacts

Documents

No documents available.

Lifecycle

Solicitation:GS-07-P-17-HH-C-0TBD
  1. Combined Synopsis
  2. Awarded

This opportunity has been awarded.

  1. 5×
    Combined SynopsisNov 29, 2016

    C-Architect-Engineer Services for a New US Courthouse in Greenville, Mississippi

    Notice f2fb7274e3409a8b56b61dd74a38652d on SAM.gov

  2. AwardedCurrentFeb 15, 2018

    C-Architect-Engineer Services for a New US Courthouse in Greenville, Mississippi

    Notice 335b27fcdf31c879acf22da0960cdcb7 on SAM.gov

Similar Opportunities

Title
Match
Phase
Deadline
This is a Sources Sought Notice only. This notice does not constitute a Request for Qualifications (RFQ), Request for Proposals (RFP), or Invitation for Bids (IFB), nor does it represent a commitment by the Government to issue a solicitation or award a contract. This Sources Sought Synopsis is issued solely for market research and planning purposes to determine the availability and adequacy of potential sources. It is not a Request for Proposals or Quotes and imposes no obligation on the Government to acquire any goods or services. Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. The Government reserves the right to determine the appropriate acquisition approach based on the results of this market research. Responders should not anticipate feedback regarding their submissions. The Government will not pay for any costs incurred in responding to this Synopsis; all costs associated with responding are solely at the responding party's expense. The information provided herein is subject to change and is non-binding on the Government. The purpose of this notice is to conduct market research to identify potential and qualified sources, assess industry capabilities, and establish effective acquisition strategies, including potential small business set-aside opportunities. No reimbursement will be provided for any costs associated with submitting information in response to this announcement or any follow-up information requests. Overview The General Services Administration (GSA), Public Buildings Service (PBS), is conducting market research to establish Multiple-Award Indefinite-Delivery, Indefinite-Quantity (IDIQ) contracts for comprehensive, multidisciplinary Architect-Engineer (A/E) services. These contracts are intended to provide integrated, sustainable, and adaptive design solutions across federally owned and leased real property nationwide. The Government anticipates awarding multiple contracts with multi-year ordering periods (5 year base with one 5 year option) to support GSA zones and client agencies across the United States and its territories. Expected typical project size is to be above the simplified acquisition threshold of $350,000. The potential place of performance for services rendered under this contract is on an as-needed basis for federal projects anywhere in the United States and its territories. This will require the capability to travel to GSA and other Government agency office locations nationwide. In some instances, performance of services is expected to require the capability for contractors to dispatch personnel to multiple locations simultaneously. The applicable North American Industry Classification System (NAICS) code for this requirement is 541310 (Architectural Services) & 541330 (Engineering Services), which has a small business size standard of $12.5 million and $25.5 million respectively. Scope of Services Services provided under the resulting IDIQ contracts will encompass a comprehensive range of professional A/E design and engineering disciplines. Scopes of work for individual task orders may include, but are not limited to, the following: 1. Core Project Life Cycle Services - These services cover the entire project lifecycle, from initial concept to post-construction closeout. Planning and Pre-Design Feasibility, pre-design, and project development studies Master planning Cost Estimating Real Estate Market Analysis Assessment and Investigation Existing conditions surveys, and field investigation Building condition survey evaluation reports (exterior and interior) Environmental investigation, reviews, inventories, and audits Energy audits and studies Design and Documentation Concept design, Design development, and Construction document development (both architectural and engineering) Interior design, including Furniture, Fixtures, and Equipment (FFE) Building standard documents Construction Support and Closeout Constructability review and evaluation Submittal and shop drawing review Management and inspection (M&I) services during construction and Construction inspection Building and system commissioning Post Construction Contract Services (PCCS); Record and close-out documents 2. Specialized Technical & System Design - Work requested often involves the assessment, repair, and upgrade of existing complex building systems. Mechanical, Electrical, and Plumbing (MEP) Full MEP services, including design of HVAC systems and electrical systems and lighting Assessment and design for mechanical components (e.g., pumps, fans, air handlers, water distribution systems) and air distribution Design of water and waste water systems, including performance of sanitary inspections Temperature control assessment and design and BAS system assessment and integration Building Structure and Envelope Structural evaluation and design Façade evaluation and remediation design Water infiltration investigation and mitigation design Safety, Security, and Compliance Fire and Life Safety evaluation and design Rehabs to improve energy efficiency and safety concerns Seismic & Blast protection and Vertical Transportation Code Compliance 3. Required AE Disciplines and Expertise - AE firms will need staff with licensed and/or specialized expertise in the following disciplines: Core Architectural and Engineering Disciplines Architecture and Interior Architecture Mechanical Engineering, Electrical Engineering, Structural & Civil Engineering, and Plumbing Historic Preservation Specialized Expertise A Qualified/Licensed Fire Protection Engineer (NCEES)* Security Space Planning & Workplace Cost Estimating and Scheduling Environmental Services Modernization and Quality Control Building Information Modeling (BIM) Quality control review and Report writing Submission Requirements Interested firms are invited to submit a written Capability Statement. Submissions must not exceed five (5) pages in length and must address the following elements: A. Company Profile Official company name, street address, telephone number, and primary website URL. Unique Entity Identifier (UEI) and Commercial and Government Entity (CAGE) Code. Office location(s) and primary design production facilities. Business size status under NAICS 541310 or 541330 (Large Business or Small Business). Applicable SBA socio-economic certifications (e.g., 8(a), HUBZone, Service-Disabled Veteran-Owned Small Business [SDVOSB], Woman-Owned Small Business [WOSB], or Economically Disadvantaged WOSB [EDWOSB]). B. Relevant Experience Summarize three to five (3–5) relevant projects completed within the past ten (10) years. Demonstrate experience in projects of similar scale, scope, and complexity, such as federal workplace design, major repairs and alterations, or complex building systems. Include project title, customer/agency point of contact, contract value, role (Prime or Subcontractor), and a brief narrative of the work performed. C. Nationwide Capacity Demonstrate organizational capacity to manage and execute multiple task orders simultaneously across diverse geographic locations nationwide. Describe key disciplines maintained in-house versus those typically fulfilled through subcontractor or joint venture arrangements. Submission Instructions Responses must be submitted electronically via email to the primary procurement contacts listed below: Submission Deadline: Primary Contact: Point of Contact Email: Subject Line Format: Sources Sought Response - National A/E IDIQ - [Firm Name] Hard copies, telephonic inquiries, and late submissions will not be reviewed or acknowledged. All information provided in response to this notice will be used strictly for market research and acquisition planning purposes. This notice encourages participation from qualified small business concerns, including socio-economic program participants, to assist GSA in evaluating the feasibility of small business set-asides for this procurement. All prospective offerors are responsible for monitoring SAM.gov for updates, future notices, or potential solicitations related to this requirement.
77%
Market Research11/13/2026
*10/21/2026- Amendment posted of Questions and responses posed by contractors. Submission due date reemains the same. THIS IS A SYNOPSIS OF PROPOSED CONTRACT ACTION. FOLLOW THE INSTRUCTIONS CONTAINED IN THIS NOTICE FOR RESPONDING TO THIS OPPORTUNITY. The Federal Bureau of Prisons (FBOP), Central (CO), anticipates the need for indefinitedelivery indefinite-quantity (IDIQ), firm fixed-price contracts for supplemental architect-engineer (A-E) services, with a one (1) year base requirement and up to four (4) unilaterally exercised option years, with a possibility for a six-month extention as well. The Government is not obligated to exercise any of the option periods. While the Government anticipates multiple awards, no more than four (4) awards are expected. The services will be for various FBOP facilities throughout the United States. See the Statement of Work attachment for description of services. Most projects will take place in a fully occupied, fully operational, secure correctional environment. Most projects require complex design effort and detail along with extensive coordination between design disciplines, the institutions, and Central Office during design and construction. Firms are to perform services as required by the issuance of individual task orders. The guaranteed annual minimum amount of each contract is $10,000.00 and the estimated annual maximum is $10,000,000. The North American Industrial Classification System (NAICS) code applicable to this requirement is 541310 (Architectural Services). Interested firms must be registered in the System for Award Management (SAM) at https://SAM.gov. This requirement will be fulfilled pursuant to the Federal Acquisition Regulation (FAR) 36.6 and the Brooks Act. Pursuant to FAR Deviation 36.201(b), for any firm(s) receiving award under this requirement, no construction contract may be awarded to the firm (including any of its subsidiaries or affiliates) that designs the corresponding project Firms having the capabilities to perform the services described in this announcement are invited to respond by submitting Parts I and II of the Standard Form 330 (Architect Engineer Qualifications) dated not more than 12 months before the date of this synopsis. The current version of the form along with any extra pages/sections may be retrieved from www.gsa.gov/forms (Type in "SF330" in the Form Name or Number block for a full listing of the associated forms. *** Include a cover letter detailing your firms name and main office address (as registered in sam.gov), UEI#, Tax ID# (TIN), CAGE code, and main point of contact for your firm through out the solicitation process (phone and e-mail). Submissions should be on standard 8.5'' x 11" format. No extraneous attachments. Selection criteria will be based on the following evaluation factors in descending order of importance: Specialized Experience and Technical Competence (32%) Capacity to Accomplish the Work in the Required Time (demonstrated ability to complete projects on time) (27%) Acceptability of an Established Team of Key Personnel (23%) Professional Qualifications Necessary for Satisfactory Performance (including licensed engineers and architects licensed Nationwide)(18%) Submit details (maximum of one page per project) of not more than five significant and/or complex renovation projects completed in the past five years (Utilize Section F of the SF-330). Identify the lead designer and address the design approach with salient features for each project. Discuss how the client's program, function, image, mission, economic, schedule and operational objectives were satisfied by the overall design/planning solution. Include tangible evidence where possible such as certificates, awards, peer recognition, etc., demonstrating design excellence. Provide a client reference contact for each project, including name, title, address, phone, fax, and email. Submit resumes of key personnel outlining commitment to projects and qualifications and relevant experience as individuals and as a team. Highlight sustainability features incorporated into the project design (e.g., energy/water efficiency, waste reduction, use of recycled materials). Submit a narrative outline of not more than one page describing the firm's project management planning, coordination, scheduling and production facilities, capabilities, and techniques for both design and construction inspection (Utilize Section H of the SF-330). Submit a narrative outline (maximum one page) with examples describing the firm's ability to evaluate/develop accurate preliminary project budgets, ability to control project costs during design process, ability to design within funding limitations, methods used to coordinate construction documents, work of various engineering disciplines, and provide general production quality control (Utilize Section H of the SF-330). No fax or paper submissions. Submit electronically through the JEFS APP BOX at link below: https://jefs.app.box.com/f/336fbbe977394048827a238f901db3a3 All submissions should be in Adobe format. Title the file in the following format: 15BBNF26R70000006_ Company Name_SF330 Architect Engineer (A/E) Services for Central Office Electronic copies of each submission shall be compatible with the following software products: Adobe Acrobat Reader 11 and Microsoft Office Suite 2016. Narrative portions of the submission shall be in Adobe Acrobat portable document file (pdf) searchable text format. The Submitter shall not embed sound or video (e.g., MPEG) files into the submission files. Electronic files shall be clearly identified for each volume, section, and item. The Submitter must ensure electronic files are virus-free and shall run an anti-virus scan before submission. Submissions by mail or hand carried will not be evaluated. All responses must be received no later than Wednesday, November 4, 2026, 10:00 AM MST. It is the responsibility of the Submitter to confirm receipt by contacting Alex Jackson, Contracting Officer, at a4jackson@bop.gov. Failure to submit all required information may result in rejection. All submissions received after the exact time specified for receipt shall be treated as late submissions and will not be considered except under facts and circumstances allowed by the Federal Acquisition Regulations (FAR). Based on these submissions, a short-list of no more than six (6) firms will be selected for an interview. Firms should be prepared to discuss their submittals and to demonstrate their ability to fulfill the contract requirements. Final selection will be based on SF-330 submissions and interviews. After the SF-330 review and interview process, four (4) selected firms will be invited to submit a formal proposal and must be prepared to negotiate overhead, profit, and hourly rates for anticipated disciplines for use in negotiating firm-fixed-price contract rates as well as firm-fixed-price task orders to be completed under the contract. All contract awards and task orders thereunder are subject to a determination of fair and reasonable pricing. This acquisition is 100 percent small business set-aside. Firms must be registered in SAM.gov as a small business (see FAR provision 52.219-1 in the Representations & Certifications section of the SAM registration. If you have questions about SAM.gov, Government procurements in general, or need assistance in the preparation of your bid/proposal/offer, a local Procurement Technical Assistance Center (PTAC) may be able to help. The Procurement Technical Assistance Program was authorized by Congress in 1985 in an effort to expand the number of businesses capable of participating in the Government marketplace. To locate a PTAC near you, go to http://www.aptac-us.org.
73%
Pre-Solicitation11/04/2026
SOURCES SOUGHT NOTICE Healthcare Facility Architect-Engineer (A-E) MATOC - California
65%
Market Research11/27/2026
This is a notice of the Government’s intent to negotiate and award a sole-source, fixed-price architect-engineer contract for a revised drawing package. The requirement is for architect-engineer services to update the existing design package and produce a coordinated, permit-ready construction set. Market research indicates that only one responsible source is reasonably available to satisfy the requirement without substantial duplication of cost and schedule delay. This notice is not a request for competitive proposals.
65%
Pre-Solicitation11/05/2026
INDEFINITE DELIVERY ARCHITECT-ENGINEER CONTRACT FOR SURVEY, MAPPING AND RELATED SERVICES, PRIMARILY VARIOUS LOCATIONS, ALASKA THIS IS A SOURCES SOUGHT ANNOUNCEMENT ONLY. The US Army Corps of Engineers is conducting market research to facilitate a determination of acquisition strategy. The determination of acquisition strategy for this acquisition lies solely with the government and will be based on this market research and information available to the government from other sources. The U.S. Army Corps of Engineers, Alaska District, is conducting this market research to identify businesses which have the capability to perform the following work: The AE selected would be required to have sufficient staff, flexibility, and capability to be available on an as-needed basis. Typical types of services to be provided may include topographic, hydrographic, tidal determinations (gauging), aerial mapping (LIDAR), GPS control, boundary establishment, 3D digital mapping, office computations and other specialized surveys for use in developing “Plans and Specifications”. The selected firm must demonstrate the ability to provide Autodesk Civil 3D formatted drawings and all support files that conform with the Corps of Engineers CADD/GIS Technology Center A/E/C CADD Standards (version 5.0) using the most recent version of Autodesk Civil 3D at the time of contract and follow-on delivery order award. The applicable North American Industry Classification System (NAICS) code is 541370, Engineering Services, and the related small business size standard is $19 Million. THIS IS A SOURCES SOUGHT FOR QUALIFIED PRIME CONTRACTOR FIRMS ONLY. All interested firms are encouraged to respond to this announcement no later than 17 March 2026, 2:00 PM AST, by submitting all requested documentation listed below to: US Army Corps of Engineers, Alaska District, ATTN: CEPOA-CT-C/M (Nelsen), PO Box 6898, JBER, AK 99506-0898 or via email to brittney.morrison@usace.army.mil and michelle.nelsen@usace.army.mil Interested firms should submit a capabilities package (not exceeding 5 pages) demonstrating the ability to perform work listed above. Packages should include the following information: Business name, Cage code, address and business size under NAICS 541370 If a small business, identify small business type (HUBZone, SDVOSB, 8(a), Woman Owned Small Business, etc) (3) Demonstration of the firm's experience as a prime contractor on projects of similar size, type and complexity within the past five years. List actual projects completed and include project title and location, a brief description of the project to include dollar amount of the project and work that was self-performed. Responsible sources demonstrating relevant experience and the capabilities to perform the work will be considered. System for Award Management (SAM), as required by FAR 4.1102 and 4.1201, will apply to this procurement. Prospective contractors must be registered prior to award. Lack of registration in the SAM database will make an offeror ineligible for award. Information on SAM registration can be obtained via the Internet at https://www.sam.gov/SAM/
65%
Market Research03/17/2026

Additional Details

Solicitation Number

GS-07-P-17-HH-C-0TBD

Archive Date

Mar 2, 2018

Office Address

FORT WORTH, TX, 76102