Notice ID: e2f4e2c1269ca2ebbf9b84e7911d4bcfAward NoticeAwarded
Supplemental Architect Engineer Services for Southeast Texas
Awarded on September 5, 2019. Full description on SAM.gov.
Awarded tounder 47PH0819D0047 (source: SAM.gov award notice)• $10.0M
Overview
- Posted
- September 5, 2019
- Notice type
- Award Notice
- NAICS
- 541310: Architectural Services
- Agency
- General Services AdministrationPUBLIC BUILDINGS SERVICE
Notice details
- Office
- PBS R7 PROG SUPPORT - CAPITAL AND IDIQ
- PSC
- C: ARCHITECT/ENGINEER SERVICES
- Last updated
- Oct 10, 2026
- Award date
- Sep 5, 2019
- Award amount (SAM.gov award notice)
- $10.0M
Identifiers
- Solicitation number
- 47PH0818R0008
- Notice ID
- e2f4e2c1269ca2ebbf9b84e7911d4bcf
- Award number (PIID)
- 47PH0819D0047
Description
General Information Document Type: Presolicitation Solicitation Number: 47PH0818R0008 Posted Date: August 29, 2018 Response Date: October 3, 2018 Archive Date: N/A Classification Code: C-Architect and Engineering (A-E) Services Title: Indefinite Delivery Indefinite Quantity Contract (IDIQ) for Supplemental Architect/Engineer Services for Southeast Texas Description 1. CONTRACT INFORMATION: a. General. The General Services Administration (GSA) is soliciting Architectural and Engineering (A-E) services for Southeast Texas. This acquisition is being procured in accordance with Public Law (PL) 92-582, formally known as the Brooks Act as implemented in the Federal Acquisition Regulation (FAR) Subpart 36.6. The firm selected for negotiation will be based on demonstrated competence and qualifications for the required work. This procurement is unrestricted. This announcement is open to all businesses regardless of size as stated above. If a large business is selected for this proposed contract, it must comply with FAR 52.219-9 regarding the requirement for a subcontracting plan. The subcontracting plan is not required with this submittal. The North American Industrial Classification System Code (NAICS) applicable to this project is 541310, Architectural Services, which has a size standard of $7.5 million in average annual receipts. GSA proposes to award one indefinite delivery, indefinite quantity (IDIQ) contract for supplemental AE services for Southeast Texas, which currently includes but is not limited to, the following counties: Austin, Brazoria, Chambers, Colorado, Fort Bend, Galveston, Hardin, Harris, Jasper, Jefferson, Liberty, Matagorda, Montgomery, Newton, Orange, Polk, San Jacinto, Tyler, Waller, and Wharton. The secondary contract areas will be the rest of Texas as well as the States of New Mexico, Arkansas, Oklahoma and Louisiana. This IDIQ contract will be negotiated and awarded for one (1) one-year base period and four (4) one-year option periods. The minimum guaranteed contract amount is $1,000 for the base year only. There is no limit on the number of task orders or the size of a project; however, the total cumulative task orders amount shall not exceed $10 million for the entire five year contract period. b. Contract Award Procedure: To be eligible for contract award, a firm must be registered with the System for Award Management (SAM) database. Register via the SAM Internet site at http://www.sam.gov. The Government will not indemnify the firm against liability involving asbestos or other hazardous materials, that is, no clause holding the firm harmless will be included in the contract. A Firm-Fixed-Price (FFP) IDIQ contract will result from this solicitation, including profit, overhead and hourly rates for anticipated disciplines and for use in negotiating FFP task orders. Missing one (1) required element will be grounds to determine the firm as non-responsive and be eliminated from further consideration. A supplemental architect-engineer Lookup Table for pricing task orders for projects with an estimated construction cost of up to $2 million will be included in the contract. The Government will use the fixed price amount in the Lookup Table which will be a function of project size, type, and complexity. The Lookup Table will be provided to the A-E with the Request for Price Proposal. c. Nature of Work: The services necessary for each requirement will be negotiated and awarded as individual task orders. The A-E shall furnish all services, materials, supplies and supervision required to fully complete each task order. d. Pre-Proposal Conference: A pre-proposal conference for this synopsis will be held on September 5, 2018 from 10:00 AM -11:00 AM Central Standard Time at the following call in number 866-564-9718 and the passcode is 1817722#. The purpose of the conference is to explain the requirements and answer questions from potential Offerors. 2. PROJECT INFORMATION: The A-E firm selected shall primarily provide professional design services with advanced estimating for repair, replace and alteration projects in Federal Office Buildings, Federal Courthouses and Land Ports of Entry. "Design" primarily includes project site observations, design in phases, construction documents, design clarifications and record drawings. "Estimating" primarily includes budget estimates, market analysis, detailed construction estimating in phases and bid technical analysis. More than 50% of GSA owned buildings qualify for historic designation. Estimates are required to be within +/- 5% and must have shell and tenant improvement breakdowns. Construction cost on the majority of projects is less than Prospectus level (currently $3.095 million). Disciplines required in task orders will primarily be architectural, mechanical, electrical, fire/life safety, estimating specialist and sometimes structural. While these building types, tasks, disciplines and expertise are needed for a significant percentage of orders, other building types, tasks, disciplines and expertise will be required. Therefore, adaptability should be demonstrated. Other tasks and related disciplines examples include the full range of building sciences that Architects and Engineers can provide such as detailed project inspections, project investigations, pre-planning services, design programming, optimizing design selections, Feasibility Studies, sustainability, risk assessments; civil design, Boundary and topographical surveying, pavement rehabilitation; energy conservation audits, equipment load measurements; blast resistance studies, seismic studies, high-wind resistance design and physical security design. Other areas such as Cost Management Services including preparation of all forms of budgets, cost modeling, market research, economic studies, multiple-stage estimating with specific breakout totals, complex budgetary control with oversight management and analysis. Nominal invasive investigation for the building and systems, subsystems, components, equipment, and materials addressing such critical features as building walls/glazing, roofing, HVAC equipment, plumbing, electrical systems; diagnostics expertise required for problem identification and resolution including thermography, acoustic performance, lighting quality, moisture content in material, air/water conditions, contaminant level measurements. Other tasks might be Construction Management and Inspection, Construction Observation, advanced quality control monitoring with related testing and multi-phased turnover services. Commissioning and start-up planning, including forecasting start-up duration, estimating start-up costs, determining start-up objectives, developing technical services requirements for performance standards and goals, start-up with calibration. Obtaining O&M material, plus scheduling and/or supervising O&M training. Post Construction Services, such as performing one-year post-occupancy reporting analysis, facilities performance evaluations, post-occupancy systems management with diagnostics. Assisting GSA in the formulation of lessons learned. 3. SELECTION CRITERIA: Selection Criteria for this acquisition are listed below in descending order of importance. (a) Quality In Design: All designs are required to achieve excellence in aesthetics and technical design. Information requested for placement in the SF 330, Section H, including the Portfolios and Design Approach Statements, will be evaluated for outstanding talent in both architecture and engineering. Design solutions will be evaluated for above standard talent, application, execution and performance. Design Approach Statements will be evaluated for the lead designers' demonstrated application for excellence in their designs and commitment to excellence in their profession. Exceptional designs will receive higher ranking in the respective ranking categories over firms with modest designs. Expertise with issues such as energy conservation, energy modeling, lifecycle cost analysis, sustainability, alternative energy application and related items will receive a higher ranking over firms demonstrating general design experience only. Measured, quantified and verifiable documentation of "before and after" performance of systems will receive a higher ranking in the respective ranking categories over firms espousing adherence to excellence. Expertise with complex customers such as the U.S. Customs and Border Protection, Courts and U. S. Marshals will receive a higher ranking in the respective ranking categories over firms demonstrating simple experience with moderately complex customers. Consideration will be given for design awards in both architecture and engineering disciplines based on type and relative application. (b) Experience, Performance, Technical Ability and Professional Acumen: Proposals will be evaluated on the team's demonstrated experience, performance, technical abilities, application of standard of care and exceptional care. Key personnel of the team who will be directly involved in providing the contract services will be evaluated on education, project experience, ability to work in team effectively, technical ability and other relevant qualifications that will provide the best opportunity for the successful completion of task orders under this contract. Additionally, proposals will be evaluated on how the proposed team will provide exceptional care with such concepts as unique insight, superior judgment, strategic management, incorporated risk analysis, pragmatic designs, optimal design selections or other expertise. Furthermore, past performance/experience will be evaluated on successful past performance based on example projects from the owner, and/or peer and teammate point of view. The Government may also use corporate knowledge when evaluating this factor. There will be an evaluation of the team's ability to bring projects in on contract required budgets +/- 5% and tracking/controlling costs. (c) Management, Organization, Production and Quality Control: Proposals will be evaluated on demonstrated ability to provide high quality design, execute constructible and biddable Construction Documents while meeting schedules, providing well-coordinated drawings within each discipline, across disciplines, with specifications and explains a clear understanding of how the team uses specifications to aid in controlling construction cost. Consideration will be given on a Communication plan over just a chart with the plan clearly defining efficiencies, displays how stakeholders are included, and demonstrate a commitment to timely communications. Proposals will be evaluated on how teams are organized, managed, how well the teams works together, how they will maintain good working relationships; that roles, responsibilities and authorities are clearly established; how the teams can be proactive or responsive to emerging situations; conducting situation evaluations and make midcourse corrections. Consideration will be given for handling, overseeing, scheduling and staffing projects with the inconsistent and unpredictable issuance of task orders; quality assurance approach in meeting the requirements of the Task Orders. (d) Construction Management and Inspection Capability: Proposals will be evaluated on experience and capability of the firm and consultants with respect to Management and Inspection services for projects during the construction phase of the described projects, construction management as agent and construction observation. There will be an evaluation of the proposed quality control during construction, communications, structure of service, experience of those involved, how costs are controlled and on a clear understanding of how the team uses specifications to assist in management during construction. (e) Location in and Knowledge of Geographical Area: The evaluation will consider the team's ability to accomplish at least 35 percent of the required A/E services by a firm located within the geographical delineated area. The evaluation will also consider knowledge of local conditions within the geographical area including tactical, operational, strategic issues for all areas of construction related to the key disciplines as well as design and bidding. This will include everything from supply, labor force, and weather, to the local construction climate's impact on cost estimating. There will also be consideration given to how key team members can conduct pre-design site review of the proposed work without incurring extra cost to the government for travel. 4. SUBMITTAL REQUIREMENTS Once the proposal is submitted, and prior to award, any replacements or substitutions of any personnel or consultants may deem your proposal unacceptable. It is critical to propose personnel that have a high level of certainty that they will be available to perform the duties under this contract for the duration of the contract. Any and all changes made after the initial submission of your technical proposal will be re-evaluated for technical sufficiency and may negatively affect the order of your technical rating as initially established. Interested firms having the qualifications to meet these requirements are invited to submit their proposal using Standard Form 330 along with a letter of interest. Please be specific, provide pertinent and requested information. Vague, relative and general information will be discounted. Projects completed five (5) years before the issuance of this solicitation will not be considered. Only the top rated firms will be recommended for interview by the screening board, based solely on their written response to this announcement and reference contacts. Include a Part II (General Qualification) for each firm that is part of the proposed team. While selection will be based on best technically qualified for small repair, replacement, and alteration work; examples may include new, large or highly complex projects. SF-330, Section C: Section C may be modified to provide more than six consultants. However, prioritize the consultants and use the first slots for those that are most important to creating the best well rounded team or demonstrate your concentrated areas of expertise. It is recommended that this information be included in Section F as well. SF-330, Section D: Include an organization chart of the team. Also, enclose Section D within the required Section H Communication Plan. SF-330, Section E: "Resumes of Key Personnel Proposed for This Contract", Item 13, "Role in This Contract". Only a few individuals in the lead firm and prime consultants will work with the GSA team members on a regular basis. GSA considers these individuals as the "Key Personnel". Those individuals should be prioritized and placed in the first few pages of Section E with their roles clearly noted in Item 13. Therefore, if the Project Manager is integrally involved in the task orders he/she might be written in this box as "KEY: PM, lead for all task orders"; or if multiple duty "KEY: PM, In House Hist. Pres., Constructability QA". CEOs and other executive personnel should not be submitted as "KEY" unless they have direct responsibility for accomplishing the task orders. Important team members or consultants that would have a primary but not regular role can be placed after the initial "KEY" designation. Therefore box 13 could have the designation "Primary Spec Writer and Constructability Coordinator", or "Historic Preservationist Specialist", or "Prime: Civil Engineer" or other important team designation. It is required that you include the Lead Architectural Designer, Lead Engineering Designer and the Primary Point of Contact that would be responsible for managing this contract and assigning task orders in Section E. It is recommended that personnel directly responsible for work submitted in Section F should also be included in Section E. SF330, Section F: Form may not be modified. As stated in the SF330 provide example projects which best illustrate proposed team's qualifications for this contract and provide a brief description of the project and relevance to this contract. Projects should demonstrate ability to successfully accomplish a wide range of project types, sizes and budgets. At least six (6) out of the ten (10) projects must have construction completed. Three (3) out of the ten (10) must be directly attributable to the Lead Designer. It is important to carefully match example project titles used in different areas of the proposal for clarity. This is particularly true of example projects used in Section F and Section H. SF330, Section H: Quality in Design: Submit a portfolio representative of the lead architectural designer's ability to provide high quality in design (not to exceed 5 projects) and include a design approach statement (not to exceed 2 pages). Each example project should include no more than 3 single sided pages. Photographs, sketches and drawings are welcome. HVAC Mechanical engineering is considered the primary discipline regarding high quality engineering design for this contract. Submit a portfolio representative of the lead mechanical designer's abilities to provide high quality in design (not to exceed 3 projects) and include a design approach statement (not to exceed 1 page). Each example project should include no more than 2 single sided pages and should include project challenges, application of design intent, objective details, performance outcomes, other pertinent facts including verifiable information and other information that can substantiate application. Forensic analyses projects are welcome and can be a separate category. Consideration will be giving for facts, metrics, before and after performance data and measurable energy savings. Other disciplines that are exceptional should follow the ME's write up. Include a Management Plan (not to exceed 3 pages) with a clear plan of the team's overall management philosophy that includes; project assignment methodology and approach; a plan on management of small projects repair, replacement and alteration work; a plan for designing and producing all work within the negotiated fee; a plan on designing projects that will meet the Government's limited construction budgets; and a plan for scheduling that includes a subheading on managing and scheduling projects with the Government's unpredictable issuance of task orders in terms of number, importance and urgency. Include a plan to meet FAR 36.203(a) and how you track/control costs. Consideration will be given for a plan or demonstrated method to lower construction costs using specifications. Provide a Communication Plan clearly articulating the strategy and overall approach to communication. Include goals, roles, responsibilities and technology. Provide plan on how the team will be proactive on design reviews and evaluations, being responsive to an issue, midcourse corrections, emerging situations and any additional information. A firm's formal Communication Plan may be included as an exhibit. Include a plan or exhibit for communicating with GSA on the base contract and for the typical design phase task order. Consideration will be given for including a simplified construction phase communications plan. Consideration will be given for communicating base contract information, task orders information, P100 and other guides to more junior staff. Past Performance Documentation (for each sample project submitted in Section F): Provide copies of any performance evaluations or owner review of firm's performance; Provide an owner point of contact including name, title, address and current phone number, as references will be contacted; Provide copies (or listing) of awards; Provide copies of letters of appreciation and commendations. Teams must be able to demonstrate successful past performance on example projects from the owner, and/or peer and teammate point of view. NOTE: SF 330, Part 1, Section E, "Resumes of Key Personnel Proposed for This Contract", Item 13, "Role in This Contract". In addition to the role in this contract, employees should be clearly identified as to whether they are direct or contract employees of the firm they are proposed under. All responsible Architectural or Engineering firms wishing to be considered must submit electronic copies of completed Standard Form (SF) 330 and other pertinent information (see FAR 53.236-2(b)). Your electronic copies can be submitted as a jump drive or via email. It is the submitting firm's responsibly to verify that the data is recorded on the electronic device or received via email. All proposals must be received NLT 3:00 PM Central Standard Time on Wednesday, October 3, 2018. No fax or paper documents will be accepted. Proposals must be addressed to the primary contract specialist. LATE PROPOSALS WILL NOT BE ACCEPTED. Jennifer Majdeski (cube 12B-385) 819 Taylor Street 12B1 Fort Worth, TX 76102-6114 Jennifer.majdeski@gsa.gov
Award Overview
Award Number
47PH0819D0047
Award Amount (SAM.gov award notice)
$10.0M
Award Date
Sep 5, 2019
Awardee
Awardee UEI
MAE4ZXUJZM43
Original Solicitation
Notice ID: e2f4e2c1269ca2ebbf9b84e7911d4bcf
Posted Date: Sep 5, 2019
Original Response Deadline: Not specified
Task Orders Under This IDV
Top 10 by total obligated
- $814.8KSigned Jul 18, 2023
- $811.8KSigned Sep 28, 2023
- $811.8KSigned Jul 8, 2021
- $778.2KSigned Jan 19, 2023
- $778.2KSigned Aug 17, 2022
- $778.2KSigned Aug 24, 2022
- $534.6KSigned Apr 26, 2022
- $512.2KSigned Feb 9, 2022
- $512.2KSigned Mar 17, 2022
- $502.1KSigned Oct 13, 2021
More From This Vendor
Top 5 most recent
- $273.3KSigned Nov 12, 2026
- $355.7KSigned Nov 9, 2026
- $119.5KSigned Oct 27, 2026
- $23.6KSigned Oct 26, 2026
- $44.2KSigned Oct 16, 2026
Contacts
Contracting Officer
Primary Contact
Documents
Showing 1 of 1 items
Document | Source | Agency | Posted Date | File Size | Actions | |
|---|---|---|---|---|---|---|
| Combined Synopsis/Solicitation | PUBLIC BUILDINGS SERVICE | Sep 5, 2019 | - |
Lifecycle
Solicitation:
47PH0818R0008- Combined Synopsis
- Awarded
This opportunity has been awarded.
- 2×Combined SynopsisAug 29, 2018
Supplemental Architect/Engineer Services for Southeast Texas
- AwardedCurrentSep 5, 2019
Supplemental Architect Engineer Services for Southeast Texas
Similar Opportunities
Title | Match | Phase | Deadline |
|---|---|---|---|
This is a Sources Sought Notice only. This notice does not constitute a Request for Qualifications (RFQ), Request for Proposals (RFP), or Invitation for Bids (IFB), nor does it represent a commitment by the Government to issue a solicitation or award a contract. This Sources Sought Synopsis is issued solely for market research and planning purposes to determine the availability and adequacy of potential sources. It is not a Request for Proposals or Quotes and imposes no obligation on the Government to acquire any goods or services. Responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. The Government reserves the right to determine the appropriate acquisition approach based on the results of this market research. Responders should not anticipate feedback regarding their submissions. The Government will not pay for any costs incurred in responding to this Synopsis; all costs associated with responding are solely at the responding party's expense. The information provided herein is subject to change and is non-binding on the Government. The purpose of this notice is to conduct market research to identify potential and qualified sources, assess industry capabilities, and establish effective acquisition strategies, including potential small business set-aside opportunities. No reimbursement will be provided for any costs associated with submitting information in response to this announcement or any follow-up information requests. Overview The General Services Administration (GSA), Public Buildings Service (PBS), is conducting market research to establish Multiple-Award Indefinite-Delivery, Indefinite-Quantity (IDIQ) contracts for comprehensive, multidisciplinary Architect-Engineer (A/E) services. These contracts are intended to provide integrated, sustainable, and adaptive design solutions across federally owned and leased real property nationwide. The Government anticipates awarding multiple contracts with multi-year ordering periods (5 year base with one 5 year option) to support GSA zones and client agencies across the United States and its territories. Expected typical project size is to be above the simplified acquisition threshold of $350,000. The potential place of performance for services rendered under this contract is on an as-needed basis for federal projects anywhere in the United States and its territories. This will require the capability to travel to GSA and other Government agency office locations nationwide. In some instances, performance of services is expected to require the capability for contractors to dispatch personnel to multiple locations simultaneously. The applicable North American Industry Classification System (NAICS) code for this requirement is 541310 (Architectural Services) & 541330 (Engineering Services), which has a small business size standard of $12.5 million and $25.5 million respectively. Scope of Services Services provided under the resulting IDIQ contracts will encompass a comprehensive range of professional A/E design and engineering disciplines. Scopes of work for individual task orders may include, but are not limited to, the following: 1. Core Project Life Cycle Services - These services cover the entire project lifecycle, from initial concept to post-construction closeout. Planning and Pre-Design Feasibility, pre-design, and project development studies Master planning Cost Estimating Real Estate Market Analysis Assessment and Investigation Existing conditions surveys, and field investigation Building condition survey evaluation reports (exterior and interior) Environmental investigation, reviews, inventories, and audits Energy audits and studies Design and Documentation Concept design, Design development, and Construction document development (both architectural and engineering) Interior design, including Furniture, Fixtures, and Equipment (FFE) Building standard documents Construction Support and Closeout Constructability review and evaluation Submittal and shop drawing review Management and inspection (M&I) services during construction and Construction inspection Building and system commissioning Post Construction Contract Services (PCCS); Record and close-out documents 2. Specialized Technical & System Design - Work requested often involves the assessment, repair, and upgrade of existing complex building systems. Mechanical, Electrical, and Plumbing (MEP) Full MEP services, including design of HVAC systems and electrical systems and lighting Assessment and design for mechanical components (e.g., pumps, fans, air handlers, water distribution systems) and air distribution Design of water and waste water systems, including performance of sanitary inspections Temperature control assessment and design and BAS system assessment and integration Building Structure and Envelope Structural evaluation and design Façade evaluation and remediation design Water infiltration investigation and mitigation design Safety, Security, and Compliance Fire and Life Safety evaluation and design Rehabs to improve energy efficiency and safety concerns Seismic & Blast protection and Vertical Transportation Code Compliance 3. Required AE Disciplines and Expertise - AE firms will need staff with licensed and/or specialized expertise in the following disciplines: Core Architectural and Engineering Disciplines Architecture and Interior Architecture Mechanical Engineering, Electrical Engineering, Structural & Civil Engineering, and Plumbing Historic Preservation Specialized Expertise A Qualified/Licensed Fire Protection Engineer (NCEES)* Security Space Planning & Workplace Cost Estimating and Scheduling Environmental Services Modernization and Quality Control Building Information Modeling (BIM) Quality control review and Report writing Submission Requirements Interested firms are invited to submit a written Capability Statement. Submissions must not exceed five (5) pages in length and must address the following elements: A. Company Profile Official company name, street address, telephone number, and primary website URL. Unique Entity Identifier (UEI) and Commercial and Government Entity (CAGE) Code. Office location(s) and primary design production facilities. Business size status under NAICS 541310 or 541330 (Large Business or Small Business). Applicable SBA socio-economic certifications (e.g., 8(a), HUBZone, Service-Disabled Veteran-Owned Small Business [SDVOSB], Woman-Owned Small Business [WOSB], or Economically Disadvantaged WOSB [EDWOSB]). B. Relevant Experience Summarize three to five (3–5) relevant projects completed within the past ten (10) years. Demonstrate experience in projects of similar scale, scope, and complexity, such as federal workplace design, major repairs and alterations, or complex building systems. Include project title, customer/agency point of contact, contract value, role (Prime or Subcontractor), and a brief narrative of the work performed. C. Nationwide Capacity Demonstrate organizational capacity to manage and execute multiple task orders simultaneously across diverse geographic locations nationwide. Describe key disciplines maintained in-house versus those typically fulfilled through subcontractor or joint venture arrangements. Submission Instructions Responses must be submitted electronically via email to the primary procurement contacts listed below: Submission Deadline: Primary Contact: Point of Contact Email: Subject Line Format: Sources Sought Response - National A/E IDIQ - [Firm Name] Hard copies, telephonic inquiries, and late submissions will not be reviewed or acknowledged. All information provided in response to this notice will be used strictly for market research and acquisition planning purposes. This notice encourages participation from qualified small business concerns, including socio-economic program participants, to assist GSA in evaluating the feasibility of small business set-asides for this procurement. All prospective offerors are responsible for monitoring SAM.gov for updates, future notices, or potential solicitations related to this requirement. | 81% | Market Research | 11/13/2026 |
*10/21/2026- Amendment posted of Questions and responses posed by contractors. Submission due date reemains the same. THIS IS A SYNOPSIS OF PROPOSED CONTRACT ACTION. FOLLOW THE INSTRUCTIONS CONTAINED IN THIS NOTICE FOR RESPONDING TO THIS OPPORTUNITY. The Federal Bureau of Prisons (FBOP), Central (CO), anticipates the need for indefinitedelivery indefinite-quantity (IDIQ), firm fixed-price contracts for supplemental architect-engineer (A-E) services, with a one (1) year base requirement and up to four (4) unilaterally exercised option years, with a possibility for a six-month extention as well. The Government is not obligated to exercise any of the option periods. While the Government anticipates multiple awards, no more than four (4) awards are expected. The services will be for various FBOP facilities throughout the United States. See the Statement of Work attachment for description of services. Most projects will take place in a fully occupied, fully operational, secure correctional environment. Most projects require complex design effort and detail along with extensive coordination between design disciplines, the institutions, and Central Office during design and construction. Firms are to perform services as required by the issuance of individual task orders. The guaranteed annual minimum amount of each contract is $10,000.00 and the estimated annual maximum is $10,000,000. The North American Industrial Classification System (NAICS) code applicable to this requirement is 541310 (Architectural Services). Interested firms must be registered in the System for Award Management (SAM) at https://SAM.gov. This requirement will be fulfilled pursuant to the Federal Acquisition Regulation (FAR) 36.6 and the Brooks Act. Pursuant to FAR Deviation 36.201(b), for any firm(s) receiving award under this requirement, no construction contract may be awarded to the firm (including any of its subsidiaries or affiliates) that designs the corresponding project Firms having the capabilities to perform the services described in this announcement are invited to respond by submitting Parts I and II of the Standard Form 330 (Architect Engineer Qualifications) dated not more than 12 months before the date of this synopsis. The current version of the form along with any extra pages/sections may be retrieved from www.gsa.gov/forms (Type in "SF330" in the Form Name or Number block for a full listing of the associated forms. *** Include a cover letter detailing your firms name and main office address (as registered in sam.gov), UEI#, Tax ID# (TIN), CAGE code, and main point of contact for your firm through out the solicitation process (phone and e-mail). Submissions should be on standard 8.5'' x 11" format. No extraneous attachments. Selection criteria will be based on the following evaluation factors in descending order of importance: Specialized Experience and Technical Competence (32%) Capacity to Accomplish the Work in the Required Time (demonstrated ability to complete projects on time) (27%) Acceptability of an Established Team of Key Personnel (23%) Professional Qualifications Necessary for Satisfactory Performance (including licensed engineers and architects licensed Nationwide)(18%) Submit details (maximum of one page per project) of not more than five significant and/or complex renovation projects completed in the past five years (Utilize Section F of the SF-330). Identify the lead designer and address the design approach with salient features for each project. Discuss how the client's program, function, image, mission, economic, schedule and operational objectives were satisfied by the overall design/planning solution. Include tangible evidence where possible such as certificates, awards, peer recognition, etc., demonstrating design excellence. Provide a client reference contact for each project, including name, title, address, phone, fax, and email. Submit resumes of key personnel outlining commitment to projects and qualifications and relevant experience as individuals and as a team. Highlight sustainability features incorporated into the project design (e.g., energy/water efficiency, waste reduction, use of recycled materials). Submit a narrative outline of not more than one page describing the firm's project management planning, coordination, scheduling and production facilities, capabilities, and techniques for both design and construction inspection (Utilize Section H of the SF-330). Submit a narrative outline (maximum one page) with examples describing the firm's ability to evaluate/develop accurate preliminary project budgets, ability to control project costs during design process, ability to design within funding limitations, methods used to coordinate construction documents, work of various engineering disciplines, and provide general production quality control (Utilize Section H of the SF-330). No fax or paper submissions. Submit electronically through the JEFS APP BOX at link below: https://jefs.app.box.com/f/336fbbe977394048827a238f901db3a3 All submissions should be in Adobe format. Title the file in the following format: 15BBNF26R70000006_ Company Name_SF330 Architect Engineer (A/E) Services for Central Office Electronic copies of each submission shall be compatible with the following software products: Adobe Acrobat Reader 11 and Microsoft Office Suite 2016. Narrative portions of the submission shall be in Adobe Acrobat portable document file (pdf) searchable text format. The Submitter shall not embed sound or video (e.g., MPEG) files into the submission files. Electronic files shall be clearly identified for each volume, section, and item. The Submitter must ensure electronic files are virus-free and shall run an anti-virus scan before submission. Submissions by mail or hand carried will not be evaluated. All responses must be received no later than Wednesday, November 4, 2026, 10:00 AM MST. It is the responsibility of the Submitter to confirm receipt by contacting Alex Jackson, Contracting Officer, at a4jackson@bop.gov. Failure to submit all required information may result in rejection. All submissions received after the exact time specified for receipt shall be treated as late submissions and will not be considered except under facts and circumstances allowed by the Federal Acquisition Regulations (FAR). Based on these submissions, a short-list of no more than six (6) firms will be selected for an interview. Firms should be prepared to discuss their submittals and to demonstrate their ability to fulfill the contract requirements. Final selection will be based on SF-330 submissions and interviews. After the SF-330 review and interview process, four (4) selected firms will be invited to submit a formal proposal and must be prepared to negotiate overhead, profit, and hourly rates for anticipated disciplines for use in negotiating firm-fixed-price contract rates as well as firm-fixed-price task orders to be completed under the contract. All contract awards and task orders thereunder are subject to a determination of fair and reasonable pricing. This acquisition is 100 percent small business set-aside. Firms must be registered in SAM.gov as a small business (see FAR provision 52.219-1 in the Representations & Certifications section of the SAM registration. If you have questions about SAM.gov, Government procurements in general, or need assistance in the preparation of your bid/proposal/offer, a local Procurement Technical Assistance Center (PTAC) may be able to help. The Procurement Technical Assistance Program was authorized by Congress in 1985 in an effort to expand the number of businesses capable of participating in the Government marketplace. To locate a PTAC near you, go to http://www.aptac-us.org. | 78% | Pre-Solicitation | 11/04/2026 |
SOURCES SOUGHT NOTICE Healthcare Facility Architect-Engineer (A-E) MATOC - California | 68% | Market Research | 11/27/2026 |
This is a notice of the Government’s intent to negotiate and award a sole-source, fixed-price architect-engineer contract for a revised drawing package. The requirement is for architect-engineer services to update the existing design package and produce a coordinated, permit-ready construction set. Market research indicates that only one responsible source is reasonably available to satisfy the requirement without substantial duplication of cost and schedule delay. This notice is not a request for competitive proposals. | 68% | Pre-Solicitation | 11/05/2026 |
Architect-Engineering Supplemental Services Federal Bureau of Prisons - Noth Central Regional Office Award notice to Solicitation 15BBNF26R00000001. | 68% | Awarded | Open |
Additional Details
Solicitation Number
47PH0818R0008
Archive Date
Sep 20, 2019
Office Address
FORT WORTH, TX, 76102